|
User manual for Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Mounts & Housings - Housings
- Safety instructions
- Startup and operation of the housings
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
- Price: 297 USD
|
We recommend checking out our discussion threads on the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2,
which address similar problems with connecting and setting up Housings Pelco.
|
User manual for the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2
The user manual for the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Mounts & Housings - Housings.
The Pelco EH4718DB-2 Camera Enclosure is an indoor/outdoor camera enclosure with a compact design ideally meant for cameras with fixed focal length or motor driven zoom lenses. Constructed with die-cast, extruded and sheet aluminum, the 13" enclosure provides protection against corrosion.
The enclosure comes with a pre-installed blower and heater. Installation and camera setup is simplified with the accompanied PC board which is wired in advance with internal electronics.
The enclosure is accessed through a "drop" bottom door which is at the bottom of the enclosure. The camera sled resides on the top of the enclosure. Hence, as the camera continues to be in its normal viewing position, video is not interfered while making internal adjustments.
There are two glands on the top of the enclosure, making video & power cable installation easy as they securely seal these cables. Using the mounting holes at the top, the unit can be easily installed from the ceiling. The enclosure is CE compliant and also meets the NEMA type 3R standard of being rain-proof and resistant to sleet/ice.
The enclosure proves useful especially in places like parking garage, where wall mounting is difficult.
|
If you own a Pelco housings and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2:
Mount Type | Hardware available for ceiling, wall, pipe/pole, P/T mounting | Compatible Cameras | CCTV camera with with fixed or motorized lens | Maximum Camera/Lens Size | 3.5 x 4 x 12.5" (8.9 x 10.2 x 31.8cm) | Clear or Tinted | Clear | Construction | Material: Die-cast, extruded, and sheet aluminum
Window: 0.25" (6.35 mm) thick Lexan
Cable Entry: Two PG13.5 UL compression glands on lid; maximum cable diameter 0.47" (1.19 cm)
Cable Entry Holes: 0.875" (2.22 cm) diameter; will accept 0.5" (1.27 cm) conduit fitting when gland is removed
Camera Mounting: Removable camera sled
Access Door Latch: 1/4-turn latch with molded vinyl cap | Heater/Blower | Heater/Blower (24VAC) | Enclosure Rating | Meets NEMA Type 3R standards | Operating Temperature | -10 ~ 120°F (-23 ~ +49°C) | Power Requirements | 24VAC | Power Consumption | Heater: 50W Blower: 8W | Dimensions (WxHxD) | 6.9 x 5 x 21.2" (17.5 x 12.7 x 53.8cm) | Weight | 8.8 lbs (4kg) | Package Weight | 10.0 lb | Box Dimensions (LxWxH) | 7.75 x 6.0 x 6.0" | |
The user manual for the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2 can be downloaded in .pdf
format if it did not come with your new housings, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco housingss,
where you can use our link to download the user manual for the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2.
The user manual lists all of the functions of the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2,
all the basic and advanced features and tells you how to use the housings.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Mounts & Housings - Housings.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco EH4718DB-2 18" Drop Bottom Enclosure EH4718DB-2
|
|
|
|
|