|
User manual for Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Signal Extenders
- Safety instructions
- Startup and operation of the signal extenders
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
- Price: 847 USD
|
We recommend checking out our discussion threads on the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST,
which address similar problems with connecting and setting up Signal Extenders Pelco.
|
User manual for the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST
The user manual for the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
The FSV10D1S1ST Single-Channel Digitally Encoded Video with Bidirectional Data Fiber Transmission System from Pelco transmitter allows transmission of one unidirectional composite video channel and one bidirectional RS-422 data channel over one optical fiber when used with its associated receiver. The FSV10D1 transmitter allows the user to choose bidirectional data or up-the-coax through use of a dip switch on the compatible FRV10D1 receiver unit. The selection of RS-422 data communication allows PTZ control of the Spectra IV dome. With Coaxitron control, PTZ control signals are transmitted over video coaxial cable from the controller to the FRV10D1 receiver. The receiver then transmits the Coaxitron data onto the fiber to the FSV10D1 transmitter. This Coaxitron data is transmitted from the controller to the Spectra IV dome during the vertical blanking interval of the video signal. The FSV10D1 transmitter includes a corresponding 13" fiber cable for easier pre-wiring installation and it operates using power supplied from the Spectra IV dome.
|
If you own a Pelco signal extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST:
Input | 1 Vpp, 75 ohms | Overload | >1.5 Vpp | Bandwidth | 5 Hz to 6.5 MHz | Differential Gain | <2% | Differential Phase | <0.7° | Tilt | <1% | Signal-to-Noise Ratio | 67 dB at maximum optical loss budget | Coaxial Cable Capability | 300' (100 m) cable to connect camera to fiber optic module to maintain 6 MHZ bandwidth | Interface | RS-422 | Rate | DC to 115 kbps (NRZ) | Connector | ST | Wavelength | 1310/1550 nm; single mode | Number of Fibers | 1 | Optical Power Budget | 20 dB | Transmission Distance | 37 miles (60 km) | Optical Emitter | Laser diode | LED Indicators | Link | Power | 8 to 15 VDC at 350 mA from dome | Certifications | CE, Class A; FCC, Class A; UL/cUL listed; C-Tick; designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards | MTBF | >100,000 hours | Operating Temperature | -40 to 167°F (-40 to 75°C) | Storage Temperature | -40 to 185°F (-40° to 85°C) | Relative Humidity | 0 to 95%, non-condensing | Dimensions | 4.0 × 2.5" (10.2 × 6.4 cm) | Weight | 0.46 lb (0.21 kg) | Package Weight | 0.45 lb | Box Dimensions (LxWxH) | 10.787 x 6.457 x 3.15" | |
The user manual for the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST can be downloaded in .pdf
format if it did not come with your new signal extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco signal extenderss,
where you can use our link to download the user manual for the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST.
The user manual lists all of the functions of the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST,
all the basic and advanced features and tells you how to use the signal extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco FSV10D1S1ST Single-Channel Digitally Encoded FSV10D1S1ST
|
|
|
|
|