PDF-MANUALS.com | User manual here!
User manual

User manual Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S

Operating instructions and pdf manual for use - Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S User manual, User manual Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S, Pelco, Sarix, IMP, Series, IMP219-1S, 2MP, D


User manual for Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S

Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S
  • Manufacturer: Pelco
  • Basic description and contents of package
  • Product classification: Surveillance - Surveillance Video - Wired IP Cameras
  • Safety instructions
  • Startup and operation of the wired ip cameras
  • Tips for setting up your Pelco
  • Settings and expert assistance
  • Contact Pelco service
  • Troubleshooting
  • Warranty information
  • Price: 601 USD
We recommend checking out our discussion threads on the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S, which address similar problems with connecting and setting up Wired IP Cameras Pelco.



User manual for the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S

The user manual for the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S provides necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.

The white Sarix IMP Series IMP219-1S 2MP Day/Night Surface Mount Indoor Mini Dome IP Camera from Pelco features a 3 to 9mm remote-zoom autofocus lens for wide-angle or long-range surveillance needs. Autofocus capability ensures that the camera can be automatically refocused when needed. The camera features advanced color accuracy and a mechanical IR-cut filter for increased sensitivity in low-light installations.
If you own a Pelco wired ip cameras and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S:
Specifications
Camera
Sensor 1/3.2" CMOS
Sensor Resolution 2.1 MP, 1920 x 1080
Imager Readout Progressive scan
Electronic Shutter Speed 1/5 to 1/10,000 sec
Dynamic Range 65 dB
White Balance 2,500 to 8,000 K
Noise Reduction Digital (on/off selectable)
Mechanical IR Cut Filter Auto/Manual selectable with different set points on lux
Minimum Illumination f/1.2, 33 ms: 0.30 lux color, 0.10 lux mono
f/1.2, 200 ms: 0.02 lux color, 0.01 lux mono
IR Illumination Adaptive IR up to 49' (15 m); auto on in night mode or off
Pan/Tilt Adjustment Manual; 355° pan, 75° tilt, 360° rotate
Mount Type Surface mount
Lens
Type Built-in; varifocal
Focal Length 3 to 9 mm, f/1.2
Focus Autofocus, motorized
Zoom Remote
Auto Iris DC drive, P-iris
Field of View 4:3 Aspect Ratio:
Diagonal: 85° (W), 29° (T)
Horizontal: 67° (W), 23° (T)
Vertical: 49° (W), 17° (T)

16:9 Aspect Ratio:
Diagonal: 94° (W), 32° (T)
Horizontal: 81° (W), 28° (T)
Vertical: 44° (W), 16° (T)

Field of view may vary with changes in resolution settings

Video
Video Streams Up to 2 simultaneous streams, plus service stream; the secondary stream is variable based on the setup of the primary stream
Video Overlay Camera name, time, date
Available Resolutions 16:9 Aspect Ratio:
2.1 MP (1920 x 1080)
0.9 MP (1280 x 720)
0.6 MP (1024 x 576)
0.5 MP (960 x 540)
0.1 MP (320 x 180)

4:3 Aspect Ratio:
1.9 MP (1600 x 1200)
1.2 MP (1280 x 960)
0.5 MP (800 x 600)
0.3 MP (640 x 480)
0.1 MP (320 x 240)
Frame Rates 30 (full), 20, 25, 16.67, 15, 12.5, 10, 5, 1 ips

Available frame rates are selectable for each independent stream depending on the coding, resolution, and stream configuration.

Video Encoding H.264 High or Main profiles, and MJPEG
Bitrate Control Constant bit rate (CBR), constrained variable bit rate (VBR) with target range
Stream Type Service: 320 x 240 (0.1 MP) or 320 x 180; 2 ips, MJPEG
Snapshot JPEG capture at resolution of live view stream
Window Window Blanking: 4 configurable windows
Audio
Streaming Dual-channel
Input Line in/terminal block
Encoding G.711 A-law/G.711 U-law
Networking
Port RJ-45 connector for 100Base-TX
Supported Protocols TCP/IP, UDP/IP (unicast, multicast IGMP), ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP (client), QoS
Users Unicast: 1 administrator, up to 4 viewers
Multicast: Unlimited users H.264
Security Access Multiple user access levels with password protection
Alarm
Input 1
Output 1; PhotoMOS relay (30 V, 1 A)
Triggers Unsupervised mode that detects switch closures (N.O. and N.C.)
Integration
Video Management Software Digital Sentry 7.3 (or later), Endura 2.0 (or later), third-party VMS through Pelco API 1.0, and ONVIF Profile S
Mobile Application Support Integrated to Pelco Mobile App
Video Motion Detection Simple motion detection and camera sabotage
Local Storage Capture 5- or 10-sec video clips on camera sabotage, motion detection, or alarm input
Record video continuously in the case of network outage with the option to overwrite
Video access through FTP protocol
Firmware Upgrade Cameras discovered and firmware upgrade through Pelco Device Utility 2 version 2.2 and Endura Utilities
Web Browser Support Microsoft Internet Explorer 8.0 and later
Power
Input PoE (IEEE 802.3af) Class 2; 24 VAC nominal, 18 to 32 VAC range
Consumption <6 W
Certifications and Approvals
Certifications CE - EN 55022 (Class A), EN 50130-4, EN 60950-1
FCC (Class A) - 47 CFR Part 15
UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07
ICES-003
KCC
NOM
Environmental
Temperature Operating: 14 to 122°F (10 to 50°C)
Storage:-40 to 140°F (-40 to 60°C)

Thermostatically controlled heating provides ramped heating control between the initial heater on at 59°F (15°C) and full heating mode at -40°F (-40°C)

Humidity Operating: 20 to 85%, RH condensing
General
Clearance Above Ceiling: 4.0" (10.2 cm)
Ceiling Thickness 1.5" (3.8 cm), maximum
Memory Card Support Up to 32 GB microSDHC or SDXC card
Construction Die-cast aluminum; polycarbonate bubble
Ingress Protection Rating IP66 per IEC 60529
Vandal Resistant IK10 (20 J impact) per IEC 62262
Dimensions 5.43 x 6.11" (13.80 x 15.52 cm)
Weight 1.34 lb (0.61 kg)
Packaging Info
Package Weight 3.6 lb
Box Dimensions (LxWxH) 11.1 x 6.9 x 6.8"
The user manual for the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S can be downloaded in .pdf format if it did not come with your new wired ip cameras, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Pelco users keep a unique electronic library for Pelco wired ip camerass, where you can use our link to download the user manual for the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S.

The user manual lists all of the functions of the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S, all the basic and advanced features and tells you how to use the wired ip cameras. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Pelco service.

If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S. User manuals are also available on the Pelco website under Surveillance - Surveillance Video - Wired IP Cameras.



Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S - no comments have been made yet - be the first to add a comment

Post new comment/question/response regarding the Pelco Sarix IMP Series IMP219-1S 2MP Day/Night Surface IMP219-1S

Fields marked with * must be filled out.
Your name *:
E-mail :
Subject *:
Message text *:
Enter the code *:
(spam block)
"manual"
If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

 

Can't find what you're looking for? Try Google Search!



Current discussions
Most recently discussed products:

Simmons 6-24x50 - Simmons 6-24x50 Predator Varmint Riflescope 656245
Posted by: Stuart Williams
2024-03-26 12:36:48

I have located manual for this on your site but how do I download / print it please ?...
USER MANUAL TSP2 17 BUN - Telmax TSP2-17-BUN Dual 17" Presidential TSP2-17BUN
Posted by: AYO
2024-03-26 10:07:35

MANUAL REQUIRED TO SET UP...
lens servo - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
Posted by: julia yoko
2024-03-25 22:07:20

i would like to know where the lens manual can be found...
NEPVS14-17 - ITT Night Enforcer PVS-14 Pinnacle Night Vision ITTE-NEPVS14-17
Posted by: Keller Bradshaw
2024-03-25 17:57:35

Hi, I would like a user manual for the NEPVS14-17...
YS 03 above water - Sea & Sea YS-03 Universal Lighting System SS-03541
Posted by: sameer
2024-03-24 22:26:52

Hello Would like to know is it safe to use YS 03 strobe outside water for practice purpose ? Regards...

Uploaded instruction manuals
Upload a link to an instruction manual for a depicted product here:

Link format "http://www.link2manual.com/manual.pdf"

Enter the code: "manual"






PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
sitemap.txt alx