User manual QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA
Operating instructions and pdf manual for use - QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA User manual, User manual QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA, QSC, CMX300Va, 430W, Professional, Power, Amplifie
User manual for QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA
Manufacturer: QSC
Basic description and contents of package
Product classification: Pro Audio - Live Sound - Power Amplifiers
Safety instructions
Startup and operation of the power amplifiers
Tips for setting up your QSC
Settings and expert assistance
Contact QSC service
Troubleshooting
Warranty information
Price: 480 USD
We recommend checking out our discussion threads on the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA,
which address similar problems with connecting and setting up Power Amplifiers QSC.
User manual for the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA
The user manual for the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The CMX300Va 430W Professional Power Amplifier from QSC is a 2RU rugged unit designed to meet the needs of system integrators. This amplifier is used in facilities such as performance halls, houses of worship, sports clubs, gymnasiums, dance venues, pubs, and FGM/BGM systems.
If you own a QSC power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA:
Specifications
Watts
430 W @ 1 kHz, 1% THD
Stereo FTC Power
8 Ω / FTC 20 Hz to 20 kHz / 0.1% THD: 185 W 8 Ω / EIA 1 kHz / 0.1% THD: 200 W 4 Ω / FTC 20 Hz to 20 kHz / 0.1% THD: 280 W 4 Ω / EIA 1 kHz / 0.5% THD: 300 W 2 Ω / EIA 1 kHz / 1% THD: 430 W
Bridge
8 Ω / FTC 20 Hz to 20 kHz / 0.1% THD: 530 W 8 Ω / EIA 1 kHz / 0.1% THD: 600 W 4 Ω / EIA 1 kHz / 1% THD: 830 W 70 V Direct Drive / EIA 1 kHz / 1% THD: 600 W
Signal to Noise Ratio
> - 100 dB (20 Hz to 20 kHz, 8Ω)
Input Sensitivity @ 8 ohms
1.15 V (3.4 dBu)
Voltage Gain
At 8 Ω 31.6 x (30 dB)
Output Circuit
Class AB
Power Requirements
Typical, 1/8 Power Pink Noise at 4 Ω, 120 VAC: 4.4 A Typical, 1/8 Power Pink Noise at 4 Ω, 230 VAC: 2.2 A Severe, 1/3 Power Pink Noise at 4 Ω, 120 VAC: 6.6 A Severe, 1/3 Power Pink Noise at 4 Ω, 230 VAC: 3.3 A
Distortion
SMPTE-M: < 0.02% Typical: 20 Hz to 20 kHz 10 dB below rated power < 0.03% THD / 4 Ω and 8 Ω 1.0 kHz and below full-rated power <0.03% THD / 4 Ω and 8 Ω
Frequency Response
20 Hz to 20 kHz: ±1 dB -3 dB Points: 5 Hz to 50 kHz
Damping Factor
> 300 at 8 Ω (1 kHz and below)
Input Impedance
10 kΩ unbalanced, 20 kΩ balanced
Input Clipping Level
10 VRMS (+22 dB)
Cooling
Continuously variable-speed fan, rear-to-front air flow
Connectors
Input: Active balanced; barrier strip, XLR and 1/4" (6.3 mm) to TRS tip and XLR pin 2 positive Output: Detachable terminal block and Neutrik Speakon
Controls
Front: AC switch, channel 1 & 2 gain knobs Rear: 10-position DIP switch
Indicators
Power-On: Green LED Signal: Green LED (1 per channel) Clip: Red LED (1 per channel)
Protection
Amplifier: Stable into reactive or mismatched loads Load: On/off muting, AC coupling
The user manual for the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other QSC users keep a unique electronic library
for QSC power amplifierss,
where you can use our link to download the user manual for the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA.
The user manual lists all of the functions of the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from QSC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA. User manuals are also
available on the QSC website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the QSC CMX300Va 430W Professional Power Amplifier (2RU) CMX300VA - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17