User manual Radial Engineering ProMS2 Passive Microphone Splitter R800 1122
Operating instructions and pdf manual for use - Radial Engineering ProMS2 Passive Microphone Splitter R800 1122 User manual, User manual Radial Engineering ProMS2 Passive Microphone Splitter R800 1122, Radial, Engineering, ProMS2, Passive, Micropho
User manual for Radial Engineering ProMS2 Passive Microphone Splitter R800 1122
Overall Rating: 1.0
20% of respondents would recommend this to a friend.
Manufacturer: Radial Engineering
Basic description and contents of package
Product classification: Pro Audio - In-Line Problem Solvers - Splitters & Combiners
Safety instructions
Startup and operation of the splitters & combiners
Tips for setting up your Radial Engineering
Settings and expert assistance
Contact Radial Engineering service
Troubleshooting
Warranty information
Price: 120 USD
We recommend checking out our discussion threads on the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122,
which address similar problems with connecting and setting up Splitters & Combiners Radial Engineering.
User manual for the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122
The user manual for the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122 provides
necessary instructions for the proper use of the product Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
Allowing you to send a single microphone or DI signal to up to 3 separate destinations, the ProMS2 Passive Microphone Splitter from Radial Engineering can be used in the studio to send a mic to multiple preamps for auditioning and live to send one source to multiple mixers or to supply a broadcast feed. It is a passive device, therefore requiring no power for operation. The Eclipse ET-MS10 transformer is designed to provide a flat frequency response while its RF filtering helps keep your signal interference free. The device features 14-gauge steel construction to stand up to live use.
If you own a Radial Engineering splitters & combiners and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122:
Specifications
Audio Circuit Type
Passive
Input Impedance
2.5 KΩ, unbalanced
Output Impedance
140 KΩ, balanced
Frequency Response
20 Hz to 20 kHz (+0 dB -1 dB)
Gain
-0.5 dB
Dynamic Range
>140 dB
Total Harmonic Distortion
0.001%
Noise Floor
-140 dB
Maximum Input
+26 dBu
Phase Deviation
1° @ 20 Hz
Intermodulation Distortion
0.003%
CMRR
-115 dB at 60 Hz
Transformer
Eclipse ET-MS10
Pad
-30 dB
Ground Lift
Disconnects pin-1 at both XLR outputs
XLR Configuration
AES standard pin-1 ground, pin-2 (+), pin-3 (-)
Connectors
XLR-F in, XLR-M direct; direct-2; isolated outputs
Construction
14 gauge steel chassis & outer shell
Power
Passive, no power required
Operating Conditions
For use in dry locations only between 41 to 104°F (5 to 40°)
The user manual for the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122 can be downloaded in .pdf
format if it did not come with your new splitters & combiners, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering splitters & combinerss,
where you can use our link to download the user manual for the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122.
The user manual lists all of the functions of the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122,
all the basic and advanced features and tells you how to use the splitters & combiners.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122. User manuals are also
available on the Radial Engineering website under Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering ProMS2 Passive Microphone Splitter R800 1122 - no comments have been made yet - be the first to add a comment