User manual for Radial Engineering ProRMP Reamp Box R800 1125
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Direct Boxes
- Safety instructions
- Startup and operation of the direct boxes
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 100 USD
|
We recommend checking out our discussion threads on the Radial Engineering ProRMP Reamp Box R800 1125,
which address similar problems with connecting and setting up Direct Boxes Radial Engineering.
|
User manual for the Radial Engineering ProRMP Reamp Box R800 1125
The user manual for the Radial Engineering ProRMP Reamp Box R800 1125 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Direct Boxes.
The ProRMP from Radial Engineering is a passive re-amping device that allows an engineer or producer to take a pre-recorded guitar track that would typically be at line level, and output a guitar level signal that can then be sent back to an amplifier/speaker or an effects box. This opens the door to explore new musical sounds and spur on the creative process since the unit will drive a guitar amplifier as if the player was still plugged into it.
|
If you own a Radial Engineering direct boxes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering ProRMP Reamp Box R800 1125 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering ProRMP Reamp Box R800 1125:
Input Connections | 1 x XLR | Output Connectors | 1 x 1/4" TS phone | Controls | Output control (recessed) Ground lift switch | Frequency Response | 20Hz to 20kHz, +/-0.12dB | Noise | Not specified by manufacturer | Power | Passive | Dimensions (WxDxH) | 4 1/4" x 2 3/4" x 1 3/4" (107 x 70 x 43 mm) | Weight | 1.1 lbs (0.50 kg) | Specialties | Passive transformer isolated circuit | Package Weight | 1.45 lb | Box Dimensions (LxWxH) | 6.3 x 4.2 x 2.9" | |
The user manual for the Radial Engineering ProRMP Reamp Box R800 1125 can be downloaded in .pdf
format if it did not come with your new direct boxes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering direct boxess,
where you can use our link to download the user manual for the Radial Engineering ProRMP Reamp Box R800 1125.
The user manual lists all of the functions of the Radial Engineering ProRMP Reamp Box R800 1125,
all the basic and advanced features and tells you how to use the direct boxes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering ProRMP Reamp Box R800 1125. User manuals are also
available on the Radial Engineering website under Pro Audio - Recording - Direct Boxes.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering ProRMP Reamp Box R800 1125 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering ProRMP Reamp Box R800 1125
|
|