|
User manual for Radial Engineering StageBug SB-4 Piezo DI R800 0140
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Direct Boxes
- Safety instructions
- Startup and operation of the direct boxes
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 80 USD
|
We recommend checking out our discussion threads on the Radial Engineering StageBug SB-4 Piezo DI R800 0140,
which address similar problems with connecting and setting up Direct Boxes Radial Engineering.
|
User manual for the Radial Engineering StageBug SB-4 Piezo DI R800 0140
The user manual for the Radial Engineering StageBug SB-4 Piezo DI R800 0140 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Direct Boxes.
The StageBug SB-4 Piezo DI from Radial Engineering is a compact active direct box that has been optimized for use with piezo transducers. This enables violin, dobro, mandolin, cello, upright bass, and other instruments that are best amplified using a piezo to be connected to a mixing board or recording device.
|
If you own a Radial Engineering direct boxes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering StageBug SB-4 Piezo DI R800 0140 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering StageBug SB-4 Piezo DI R800 0140:
| Circuit Type | Piezo optimized active buffer | | Frequency Response | 20 Hz to 20 kHz | | Total Harmonic Distortion | 0.006% | | Dynamic Range | 100 dB | | Input Impedance | 5 MΩ | | Maximum Input | +4 dBu | | Gain | 2 dB | | Output Impedance | 330 Ω | | Equivalent Input Noise | -101 dBu | | Noise Floor | -97 dBu | | Intermodulation Distortion | <0.01% | | Deviation | Phase: 10° @ 50 Hz | | Switches | High Pass Filter, Phase, Ground Lift | | Low-Cut Filter | 150 Hz | | Filter | Slope: 6 dB/octave | | Instrument Input | 1/4" buffered with piezo optimized load | | Auxiliary Output | 1/4" buffered to drive guitar effects, amplifier, or tuner | | Balanced Output | Pin-1 ground, pin-2 (+), pin-3 (-) | | Others | Polarity Reverse: 180°
Ground Lift: Soft lift with 100 Ω to ground | | Construction | 16 gauge steel chassis & outer shell | | Finish | Baked enamel | | Power | 48 V phantom power | | Dimensions (L x W x D) | 4.50 x 1.85 x 1.35" (114.00 x 47.00 x 34.00 mm) | | Weight | 8.80 oz (249.48 g) | | Package Weight | 0.6 lb | | Box Dimensions (LxWxH) | 8.0 x 4.7 x 1.6" | |
The user manual for the Radial Engineering StageBug SB-4 Piezo DI R800 0140 can be downloaded in .pdf
format if it did not come with your new direct boxes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering direct boxess,
where you can use our link to download the user manual for the Radial Engineering StageBug SB-4 Piezo DI R800 0140.
The user manual lists all of the functions of the Radial Engineering StageBug SB-4 Piezo DI R800 0140,
all the basic and advanced features and tells you how to use the direct boxes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering StageBug SB-4 Piezo DI R800 0140. User manuals are also
available on the Radial Engineering website under Pro Audio - Recording - Direct Boxes.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering StageBug SB-4 Piezo DI R800 0140 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering StageBug SB-4 Piezo DI R800 0140
|
|
|
|
|
