Operating instructions and pdf manual for use - Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110 User manual, User manual Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110, Radial, Engineering, SW4, 4-Channel, Audio, Switcher,
User manual for Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110
Manufacturer: Radial Engineering
Basic description and contents of package
Product classification: Pro Audio - In-Line Problem Solvers - Splitters & Combiners
Safety instructions
Startup and operation of the splitters & combiners
Tips for setting up your Radial Engineering
Settings and expert assistance
Contact Radial Engineering service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110,
which address similar problems with connecting and setting up Splitters & Combiners Radial Engineering.
User manual for the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110
The user manual for the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110 provides
necessary instructions for the proper use of the product Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
Providing versatile channel switching for a wide variety of live applications, the SW4 - 4-Channel Audio Switcher from Radial Engineering features 4 channels, each with 2 XLR inputs that can be stereo linked. Aside from the XLR inputs, each channel can also be linked, supporting tri- and quad-channel switching. Each channel is also equipped with a 3-position pre-fader listen switch that allows you to monitor source A, source B, or the stereo bus via headphones, which can be summed to mono for use with wireless guitar systems.
Channel 1 also features a mix function for summing both inputs together for simultaneous use. The unit has a master bus output, which is fed by all channels. Each channel has its own transformer-isolated output that is capable of handling over 20 dB at all frequencies.
If you own a Radial Engineering splitters & combiners and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110:
Specifications
Audio Circuit Type
Passive transformer coupled with relay switching
Number of Channels
4x AB select
Frequency Response
10 Hz to 40 kHz
Dynamic Range
136 dB
Total Harmonic Distortion
0.002 %
Phase Deviation
<3° at all frequencies
Intermodulation Distortion
0.01 %
Input Impedance
Load impedance in parallel with 10 k ohm
Maximum Input
+26 dBu channel to channel +17 dBu channel to bus
Gain
Channel to Channel: -0.26 dB with 10 k ohm load -2.3 dB with 600 ohm load
Channel to Bus Gain: +8 dB with 10 k ohm load
Output Impedance
Channel Output Impedance: 160 ohms Bus Output Impedance: 500 ohms
Transformer
Eclipse ET-LD2 line output
Pad
Input Pad: Variable trim control
Switches
AB select on each channel
Pre-Fade Listen
A & B per channel, master bus
Bus
Master bus out with headphones
XLR Configuration
AES standard pin-1 ground, pin-2 (+), pin-3 (-)
Input Connectors
XLR F
Output Connectors
XLR male 1/4" (6.3 mm) guitar
Bus Output
Stereo or mono assignable
Ground Lift
On all channels & guitar amp outputs
Power
External 100 V - 240V AC with 48 V phantom
Construction
14 gauge steel chassis & outer shell
Operating Conditions
For use in dry locations only between 41 to 104°F (5 and 40°C)
Dimensions (L x W x D)
17.5 x 6 x 1.75" (44.5 x 15.25 x 1.75 cm)
The user manual for the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110 can be downloaded in .pdf
format if it did not come with your new splitters & combiners, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering splitters & combinerss,
where you can use our link to download the user manual for the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110.
The user manual lists all of the functions of the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110,
all the basic and advanced features and tells you how to use the splitters & combiners.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110. User manuals are also
available on the Radial Engineering website under Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering SW4 - 4-Channel Audio Switcher R800 8110 - no comments have been made yet - be the first to add a comment