User manual for Radial Engineering X-Amp Re-Amper R800 1028
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Musical Instruments - Guitar Accessories - Effects Pedal Accessories
- Safety instructions
- Startup and operation of the effects pedal accessories
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 200 USD
|
We recommend checking out our discussion threads on the Radial Engineering X-Amp Re-Amper R800 1028,
which address similar problems with connecting and setting up Effects Pedal Accessories Radial Engineering.
|
User manual for the Radial Engineering X-Amp Re-Amper R800 1028
The user manual for the Radial Engineering X-Amp Re-Amper R800 1028 provides
necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Guitar Accessories - Effects Pedal Accessories.
The X-Amp from Radial Engineering is an active re-amping device that allows an engineer or producer to take a pre-recorded guitar track that would be typically at line level, and output a guitar level signal that can then be sent back to an amplifier/speaker or an effects box. This opens the door to explore new musical sounds and spur on the creative process since the unit will drive a guitar amplifier as if the player was still plugged into it.
|
If you own a Radial Engineering effects pedal accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering X-Amp Re-Amper R800 1028 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering X-Amp Re-Amper R800 1028:
Input Connections | 1 x XLR | Output Connectors | 2 x 1/4" TS phone | Input Level | +4dB balanced line level | Output Level | Continuously variable | Controls | Level control Ground lift switch Polarity reverse switch | Frequency Response | Not specified by manufacturer | Noise | Not specified by manufacturer | Power | 15VDC 400mA - center positive | Dimensions (WxDxH) | 3 5/16" x 5" x 1 7/8" | Weight | 2.6 lbs | Specialties | Polarity reverse on output 2 for correction of the phase with an amp or device connected on output 1 | Package Weight | 2.6 lb | Box Dimensions (LxWxH) | 10.8 x 5.1 x 2.6" | |
The user manual for the Radial Engineering X-Amp Re-Amper R800 1028 can be downloaded in .pdf
format if it did not come with your new effects pedal accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering effects pedal accessoriess,
where you can use our link to download the user manual for the Radial Engineering X-Amp Re-Amper R800 1028.
The user manual lists all of the functions of the Radial Engineering X-Amp Re-Amper R800 1028,
all the basic and advanced features and tells you how to use the effects pedal accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering X-Amp Re-Amper R800 1028. User manuals are also
available on the Radial Engineering website under Pro Audio - Musical Instruments - Guitar Accessories - Effects Pedal Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering X-Amp Re-Amper R800 1028 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering X-Amp Re-Amper R800 1028
|
|