|
User manual for Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X
- Manufacturer: Rane
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Networked Audio Systems
- Safety instructions
- Startup and operation of the networked audio systems
- Tips for setting up your Rane
- Settings and expert assistance
- Contact Rane service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X,
which address similar problems with connecting and setting up Networked Audio Systems Rane.
|
User manual for the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X
The user manual for the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Networked Audio Systems.
The 1RU EXP2x Dante Expander from Rane is an input/output expander that enables the HAL1x to send 32 and receive 32 audio channels from other Dante devices. The EXP2x can interface a HAL1x System with a Dante network and enables you to connect a Dante network between facilities or multiple independent HAL1x systems. Built-in sample rate converters support 48 kHz or 96 kHz sample rates on the Dante network.
|
If you own a Rane networked audio systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X:
Audio Channels | 512 in x 512 out | Units | Maximum: 16 (all channels used), daisy-chain with shielded CAT 5e or higher | Cable Length | Maximum: 300' (100 m) | Sample Rates | 44.1, 48, 88.2, or 96 kHz (adjustable using Dante Controller) | Channels | At Any Supported Sample Rate: 32 x Send 32 x Receive | Wiring | Class 2 (all rear panel terminals) | Power Requirements | 100 to 240 VAC, 50 / 60 Hz, 18 W max | Dimensions | 1.75 x 19.00 x 8.25" (4.4 x 48.3 x 20.9 cm) | Weight | 4.4 lb (2 kg) | |
The user manual for the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X can be downloaded in .pdf
format if it did not come with your new networked audio systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rane users keep a unique electronic library
for Rane networked audio systemss,
where you can use our link to download the user manual for the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X.
The user manual lists all of the functions of the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X,
all the basic and advanced features and tells you how to use the networked audio systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rane service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X. User manuals are also
available on the Rane website under Pro Audio - Installation Sound - Networked Audio Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Rane EXP2x Dante Expander for HAL1x (1RU) EXP2X
|
|
|
|
|