User manual for RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Modules & Cards
- Safety instructions
- Startup and operation of the modules & cards
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Warranty information
- Price: 160 USD
We recommend checking out our discussion threads on the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A,
which address similar problems with connecting and setting up Modules & Cards RDL.
User manual for the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A
The user manual for the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Modules & Cards.
The D-TPR3A Active Triple Pair XLR and RCA Stereo Audio Output over RJ45 Receiver Module from RDL is a three-pair audio receiving module compatible with RDL Format-A twisted pair products. The D-TPR3A features a white front-panel laminate with gray lettering that matches RDL Decora-style remote controls. The D-TPR3A module features an XLR audio output and two RCA phono jack outputs, one for the left channel and one for the right channel. The audio signal received from pair A of the RJ45 input jack feeds the XLR audio output jack. The output level from the XLR jack is set to either Mic or Line level during installation using a rear-panel switch. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the RCA output jacks at the standard -10 dBV consumer level.
The D-TPR3A module can access signals from all three cable pairs, and additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all Format-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The D-TPR3A can be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules.
The D-TPR3A can be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The D-TPR3A model can be mounted in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.
If you own a RDL modules & cards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A:
| Input Connections || RJ45 |
Format A Single Pair Used (2): B (Left); C (Right) Format A Output: RJ45
| Output || Balanced: 150 ohms |
Unbalanced: 100 ohms
| Output Connections || 2 x RCA Phono jack |
1 x XLR (balanced Mic or Line)
| Output Level || XLR: -45 dBu Mic or +4 dBu Line Level, switch-selectable on rear panel |
RCA phono: -10 dBV
| Frequency Response || 10 Hz to 50 kHz (± 0.1 dB) |
| THD & Noise || < 0.005% |
| Noise || Below +4 dBu: < -90 dB |
| Crosstalk || < 90 dB (1 kHz) |
< 75 dB (20 Hz to 20 kHz)
| Headroom || Above +4 dBu: > 18 dB |
| CMRR || > 80 dB (50 to 150 Hz) |
| LED Indicator || Power In, blue |
| Power Connections || 1 x RJ45; detachable terminal block |
| Power Requirements || 24 VDC @ 45 mA plus connected loads |
| Ambient Operating Environment || 32 to 131°F (0 to 55°C) |
| Minimum Depth || Mounting Box Minimum Depth: 2.4" (6.1 cm) |
| Dimensions || 1.6 x 4.11 x 1.89" (4.8 x 4.06 x 4.8 cm) |
| Weight || 0.245 lb (0.11 kg) |
| Package Weight || 0.25 lb |
| Box Dimensions (LxWxH) || 4.625 x 3.625 x 2.125" |
The user manual for the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A can be downloaded in .pdf
format if it did not come with your new modules & cards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL modules & cardss,
where you can use our link to download the user manual for the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A.
The user manual lists all of the functions of the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A,
all the basic and advanced features and tells you how to use the modules & cards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Modules & Cards.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL D-TPR3A Active Triple Pair XLR and RCA Stereo Audio D-TPR3A