|
User manual for RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Modules & Cards
- Safety instructions
- Startup and operation of the modules & cards
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 150 USD
|
We recommend checking out our discussion threads on the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A,
which address similar problems with connecting and setting up Modules & Cards RDL.
|
User manual for the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A
The user manual for the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Modules & Cards.
The DS-TPR2A Active RCA Stereo Audio Output over Dual RJ45 Receiver Module from RDL is a CAT5 to RCA phono receiver module. The The DS-TPR2A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. The DS-TPR2A module features two RCA phono jack outputs, one for the left channel output and one for the right channel. The audio signals received from pairs B and C of the twisted pair cable are buffered to drive the output jacks at the standard -10 dBV consumer level.
This module receives signal from only two cable pairs, so the DS-TPR2A module has a second RJ45 jack to connect cables to additional receiver modules. A separate single-pair receiver may be chained to the second RJ45 jack. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.
The DS-TPR2A may be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The DS-TPR2A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. This module is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment. The DS-TPR2A unit can be mounted in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.
|
If you own a RDL modules & cards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A:
| Input Connections | 2 x RJ45
Format A Single Pair Used: Switch-selectable A, B, or C Format A Output: RJ45 | | Output Level | 100 ohms, unbalanced | | Output Connection | 2 x RCA Phono | | Frequency Response | 10 Hz to 50 kHz (±0.1 dB) | | THD & Noise | < 0.005% | | Noise | Below +4 dBu: < -90 dB | | Crosstalk | < 90 dB (1 kHz)
<75 dB (20 Hz to 20 kHz) | | Headroom | Above +4 dBu: > 18 dB | | CMRR | > 80 dB (50 to 150 Hz) | | Indicators | Power In | | Power Connections | Detachable terminal block, or through RJ45 twisted pair | | Power Requirements | 24 VDC @ 45 mA plus connected loads | | Ambient Operating Environment | 32 to 131°F (0 to 55°C) | | Mounting Depth | Mounting Box Minimum Depth: 2.4" (6.1 cm) | | Dimensions | 1.6 x 4.11 x 1.89" (4.8 x 4.06 x 4.8 cm) | | Weight | 0.245 lb (0.11 kg) | | Package Weight | 0.25 lb | | Box Dimensions (LxWxH) | 4.625 x 3.625 x 2.125" | |
The user manual for the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A can be downloaded in .pdf
format if it did not come with your new modules & cards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL modules & cardss,
where you can use our link to download the user manual for the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A.
The user manual lists all of the functions of the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A,
all the basic and advanced features and tells you how to use the modules & cards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Modules & Cards.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL DS-TPR2A Active RCA Stereo Audio Output over Dual DS-TPR2A
|
|
|
|
|
