|
User manual for RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Mixer/Amplifiers
- Safety instructions
- Startup and operation of the mixer/amplifiers
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 340 USD
|
We recommend checking out our discussion threads on the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA,
which address similar problems with connecting and setting up Mixer/Amplifiers RDL.
|
User manual for the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA
The user manual for the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Mixer/Amplifiers.
The HD-MA35UA 35-Watt Mixer Amplifier from RDL features dual-zoned amplifier outputs and is designed for use in applications requiring background music with paging or music-on-hold functionality. The unit has 4 audio inputs, each with independent volume controls, including 2 mic- or line-level inputs on terminal blocks and 2 stereo RCA line inputs that are each summed to mono. The HD-MA35UA has two output power amplifier zones, 35 watts (Zone 1) and 4 watts (Zone 2), and are driven from high-efficiency Class D amplifier stages. The mixer and amplifier sections all normally shut down (standby "sleep" model) when audio is absent, and automatically turn on when needed.
The HD-MA35UA features 2 mixers. Its Zone 1 mixer provides 35 watts of amplifier output for background music use, while the Zone 2 mixer has 4 watts of output on a 600 ohm connection for music-on-hold scenarios and/or background music in a small zone equipped with an 8 ohm speaker. Additionally, a line-level output allows for connectivity to a separate power amplifier. This unit comes with a USA power supply.
|
If you own a RDL mixer/amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA:
| Zones | Amplifier Zones:
Zone 1 (Main): 35 W RMS, front-panel mixer (user controls)
Zone 2: 4 W RMS (8 Ω), rear-panel mixer (trimmers) | | Audio Inputs | 2x balanced, mic or line switch selectable on terminal blocks
2x unbalanced stereo summing inputs on RCA jacks
1x unbalanced amp in on RCA jack | | Gain Adjustment | Inputs 1 and 2: Rear-panel single-turn trimmer | | Maximum Input Level | Mic Inputs: -9 dBu
Balanced line inputs: + 20 dBu
Unbalanced Inputs: + 5 dBV (+11 dBV, one input), (for 1% THD+N at output) | | Phantom Power | 24 VDC (IEC 61938: 2013), switch-selectable for each mic input | | Ducking | Ducking/Muting Actuation: Automatic (Input 1 VOX: rear-panel adjustable signal threshold with LED indicator) or Manual (contact closure to ground)
Ducking/Muting Release Delay: Rear-panel single-turn trimmer, adjustable 2 to 6 seconds
Ducking/Muting: Switch-selectable for inputs 2, 3 and/or 4, 25 dB ducking attenuation, nominal | | Effects Loop | Unbalanced RCA jacks (preamp output from main mixer, input to power amplifier) | | Power Output | External RDL Module Power Output: 24 VDC, 100 mA maximum, ground-referenced | | Input Level | To Cross Compressor Threshold Equaling 23 W Amplified Output:
Mic Inputs: -50 dBu (2.5 mV), (front panel and rear trimmer at max.)
Balanced Line Inputs: -21 dBu (70 mV), (front panel and rear trimmer at max.)
Unbalanced Inputs: -15 dBV (180 mV), (front panel and rear trimmer at max., both inputs driven) | | Noise | Line or Amplified Outputs:
Mic or Balanced Line Inputs: -70 dB (below compressor threshold at max gain)
Unbalanced Inputs: <-75 dB (max gain) | | THD + N | < 0.5% (1 kHz at compressor threshold, main amp output); < 0.1% (line output, main) | | CMRR | Microphone Inputs: > 50 dB (50 Hz to 120 Hz)
Balanced Line Inputs: > 80 dB (50 Hz to 120 Hz, transformer-coupled input) | | Compressor | Threshold 2 dB below rated output, automatically adjusting attack and release times | | Frequency Response | Mixer:
Mic to line output: ±1.5 dB (40 Hz to 25 kHz)
Balanced line input to line output: ±1 dB (20 Hz to 20 kHz)
Unbalanced line input to line output: ±0.5 dB (20 Hz to 20 kHz)
Amplifiers:
Constant voltage: ±3 dB (50 Hz to 20 kHz); 4/8 Ω ±1 dB (50 Hz to 20 kHz) | | Tone Controls | ±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front-panel) with center detent | | Audio Outputs | -10 dBV nominal (316 mV), dual mono unbalanced RCA (main mixer; FLAT or EQUALIZED, switch-selectable on rear panel)
0 dBu nominal balanced, terminal block (Zone 2 mixer) | | MOH Output | 0 dBu nominal (775 mV), 600 Ω transformer-isolated, 16 dB headroom | | Amplifier Output | Zone 1 (main): 35 W RMS (25, 70 or 100 V)
Zone 2: 4 W (8 Ω, on detachable terminal block) | | Indicators | Front-panel: Signal present (4; 1 per input, green), Compressor activity (red), Power (bright=on, dim=standby, blue)
Rear-panel: dual-LED VU meter (for inputs 1 and 2, green/red), Ducking/muting threshold (yellow) | | VCA | Zone 1 (main) master level (with switch-selectable input 1 bypass), 0 to 10 VDC control, RJ45 (compatible with RDL VCA wall controls) | | Controls | Front-Panel Controls:
Zone 1 (main) mixer level controls (4, inputs 1 through 4)
EQ (2, bass and treble)
Power (momentary pushbutton, toggle on/standby)
Rear-Panel Controls:
Gain trimmers (2, input 1 and 2)
Mic/Line switch (2, input 1 and 2)
Zone 1 line output pre/post-EQ switch
Effects loop bypass switch
Sleep (standby) mode delay (4 binary switches)
Input 1 ducking/muting detector sensitivity trimmer
Phantom voltage switches (2, input 1 and 2)
Ducking control switches (3, to duck inputs 2, 3, and/or 4)
VCA paging bypass (includes or excludes input 1 from master VCA control)
Zone 2 mixer level controls (4, inputs 1 through 4) | | Sleep Mode | Power Consumption: < 1 W (amplifier and included power supply)
Delay: 10 minutes to 2 hours (switch-selectable in 10 minute increments)
Disable: Selectable | | Active Mode Delay | 2 seconds (nominal) after input audio detected | | Audio Detector Threshold | -80 dBu mic (at max input gain), -55 dBu balanced line (at max input gain), -42 dBV unbalanced | | Ambient Operating Environment | -32 to 122°F (0 to 50°C) Maximum; 68°F (20°C) Recommended | | Dimensions | 3.5 x 8.5 x 10.0" (8.89 x 21.60 x 25.40 cm) | | Weight | 7.3 lb (3.3 kg) | | Package Weight | 9.8 lb | | Box Dimensions (LxWxH) | 18.8 x 9.6 x 4.2" | |
The user manual for the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA can be downloaded in .pdf
format if it did not come with your new mixer/amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL mixer/amplifierss,
where you can use our link to download the user manual for the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA.
The user manual lists all of the functions of the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA,
all the basic and advanced features and tells you how to use the mixer/amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Mixer/Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL HD-MA35UA 35-Watt Remote Mixer Amplifier HD-MA35UA
|
|
|
|
|
