User manual RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U
Operating instructions and pdf manual for use - RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U User manual, User manual RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U, RDL, HD-RA35U, 35-Watt, Remote, Mixer, Amplifier, HD-RA35U,
User manual for RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U
Manufacturer: RDL
Basic description and contents of package
Product classification: Pro Audio - Installation Sound - Mixer/Amplifiers
Safety instructions
Startup and operation of the mixer/amplifiers
Tips for setting up your RDL
Settings and expert assistance
Contact RDL service
Troubleshooting
Warranty information
Price: 329 USD
We recommend checking out our discussion threads on the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U,
which address similar problems with connecting and setting up Mixer/Amplifiers RDL.
User manual for the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U
The user manual for the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Mixer/Amplifiers.
The HD-RA35U 35-Watt Remote Mixer Amplifier from RDL features dual-zoned amplifier outputs and is designed for use in applications requiring background music with paging or music on hold functionality. The unit has 4 audio inputs, including 2 mic- or line-level inputs on terminal blocks and 2 stereo RCA line inputs that are each summed to mono.
The HD-RA35U features 2 mixers. Its Zone 1 mixer provides 35 watts of amplifier output for background music use, while the Zone 2 mixer has 4 watts of output on a 600 Ohm connection for music on hold scenarios. Additionally, a line-level output allows for connectivity to a separate power amplifier.
If you own a RDL mixer/amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U:
Specifications
Zones
Amplifier Zones: Zone 1 (Main): 35 W RMS, remote-controlled mixer (3 user controls) with paging input level control on front panel Zone 2: 4 W RMS (8 Ω), rear-panel mixer (trimmers)
Audio Inputs
2x balanced, mic or line switch selectable on terminal blocks 2x unbalanced stereo summing inputs on RCA jacks 1x unbalanced amp in on RCA jack
Gain Adjustment
Inputs 1 and 2: Rear-panel single-turn trimmer
Maximum Input Level
Mic Inputs: -9 dBu Balanced line inputs: + 20 dBu Unbalanced Inputs: + 5 dBV (+11 dBV, one input), (for 1% THD+N at output)
Phantom Power
24 VDC (IEC 61938: 2013), switch-selectable for each mic input
Ducking
Ducking/Muting Actuation: Automatic (Input 1 VOX: rear-panel adjustable signal threshold with LED indicator) or Manual (contact closure to ground) Ducking/Muting Release Delay: Rear-panel single-turn trimmer, adjustable 2 to 6 seconds
Effects Loop
Unbalanced RCA jacks (preamp output from main mixer, input to power amplifier)
Power Output
External RDL Module Power Output: 24 VDC, 100 mA maximum, ground-referenced
Input Level
To Cross Compressor Threshold Equaling 23 W amplified Outputs: Mic Inputs: -50 dBu (2.5 mV), (front panel and rear trimmer at max.) Balanced line inputs: -21 dBu (70 mV), (front panel and rear trimmer at max.) Unbalanced Inputs: -15 dBV (180 mV), (front panel and rear trimmer at max., both inputs driven)
Noise
Line or Amplified Outputs: Mic or Balanced Line Inputs: -70 dB (below compressor threshold at max gain) Unbalanced Inputs: <-75 dB (max gain)
THD + N
< 0.5% (1 kHz at compressor threshold, main amp output); < 0.1% (line output, main)
CMRR
Mic Inputs: > 50 dB (50 Hz to 120 Hz) Balanced Line Inputs: > 80 dB (50 Hz to 120 Hz, transformer-coupled input)
Compressor
Threshold 2 dB below rated output, automatically adjusting attack and release times
Frequency Response
Mixer: Mic to line output: ±1.5 dB (40 Hz to 25 kHz); Balanced line input to line output: ±1 dB (20 Hz to 20 kHz); Unbalanced line input to line output: ± 0.5 dB (20 Hz to 20 kHz)
Amplifiers: ±1 dB (50 Hz to 20 kHz)
Tone Controls
±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front panel) with center detent
Zone 1 (main, <1% THD+N): 35 W RMS (4 Ω), 32 W (8 Ω) on detachable terminal block (switch-selectable 4 or 8 Ω impedance); Zone 2: 4 W (8 Ω, on detachable terminal block)
Indicators
Front panel: Signal present (4; 1 per input, green), Compressor activity (red), Power (bright=on, dim=standby, blue); Rear panel: dual-LED VU meter (for inputs 1 and 2, green/red), Ducking/muting threshold (yellow)
VCA
Zone 1 (main) inputs 2, 3 and 4, 0 to 10 VDC control, RJ45 (compatible with RDL VCA wall controls)
Controls
Front-Panel Controls: Zone 1 (main) paging level control (input 1), EQ (2, bass and treble), Power (momentary pushbutton, toggle on/standby)
Rear-Panel Controls: Gain trimmers (2, input 1 and 2), Mic/Line switch (2, input 1 and 2), Zone 1 line output pre/post-EQ switch, Effects loop bypass switch, Sleep (standby) mode delay (4 binary switches), Input 1 ducking/muting detector sensitivity trimmer, Phantom voltage switches (2, input 1 and 2), Ducking control switches (3, to duck inputs 2, 3, and/or 4), Tone control paging bypass (includes or excludes input 1 from tone controls), Zone 2 mixer level controls (4, inputs 1 through 4)
Sleep Mode
Power Consumption: < 1 W (amplifier and included power supply) Delay: 10 minutes to 2 hours (switch-selectable in 10 minute increments) Disable: Selectable
Active Mode Delay
2 seconds (nominal) after input audio detected
Audio Detector Threshold
-80 dBu mic (at max input gain), -55 dBu balanced line (at max input gain), -42 dBV unbalanced
Ambient Operating Environment
-32° to 122°F (0° to 50°C) Maximum; 68°F (20°C) Recommended
The user manual for the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U can be downloaded in .pdf
format if it did not come with your new mixer/amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL mixer/amplifierss,
where you can use our link to download the user manual for the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U.
The user manual lists all of the functions of the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U,
all the basic and advanced features and tells you how to use the mixer/amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Mixer/Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the RDL HD-RA35U 35-Watt Remote Mixer Amplifier HD-RA35U - no comments have been made yet - be the first to add a comment