|
User manual for Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10
- Manufacturer: Roland
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Headphone Amplifiers
- Safety instructions
- Startup and operation of the headphone amplifiers
- Tips for setting up your Roland
- Settings and expert assistance
- Contact Roland service
- Troubleshooting
- Warranty information
- Price: 299 USD
|
We recommend checking out our discussion threads on the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10,
which address similar problems with connecting and setting up Headphone Amplifiers Roland.
|
User manual for the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10
The user manual for the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Headphone Amplifiers.
Designed for producing music on-the-go, or audiophile quality music listening, the Roland Mobile UA is a compact, bus powered USB digital-to-analog converter and headphone amp that features stereo mini-jacks on both the left and right sides for connecting up to two sets of headphones simultaneously. One of the headphone outs doubles as a line out that can be used to connect to powered speakers. Low-latency ASIO and Core Audio support provides compatibility with a wide range of professional audio applications.
The Mobile UA's S1LKi audio engine supports playback of DSD audio sampled at 2.8 MHz, as well as standard PCM audio. It uses a 1-bit D/A converter, designed to to result in smooth, unclouded sound.
|
If you own a Roland headphone amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10:
| Playback Channels | PCM Format: 4 channels / 2channels (selectable by "Output Mode")
DSD Format: 2 channels | | Signal Processing | PCM Format: PC Interface: 32 bits DA Conversion *1: 1 bit, 32 bits *1 When "S1LKi Mode" is valid, DA conversion operates on 1 bit. DSD Format: PC Interface: 1 bit DA Conversion: 1 bit | | Sampling Rate | PCM Format: PC Interface: 352.8 kHz *2, 192 kHz, 176.4 kHz, 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz DA Conversion *3: 3.072 MHz, 2.8224 MHz, 192 kHz, 176.4 kHz *2 If the sampling rate is 352.8 kHz, the number of channels is limited to two channels, and playback is possible only via ASIO/Core Audio. *3 When "S1LKi Mode" is valid, DA conversion operates on 3.072 MHz or 2.8224 MHz. DSD Format: PC Interface: 5.6448 MHz *4, 2.8224 MHz DA Conversion: 2.8224 MHz *4 5.6448 MHz DSD data is down-converted to 2.8224 MHz for playback. | | DSD Format | DoP version 1.0 | | Interface | Hi-speed USB | | Connectors | Phones Jack: Stereo miniature phone type Phones/Line Jack: Stereo miniature phone type USB Port: USB Type micro B | | Phones/Line Out | Nominal Output Level: -4 dBu Maximum Output Level: +14 dBu Maximum Output Power: 158 mW + 158 mW (L + R, 40 ohms) 44 mW + 44 mW (L + R, 300 ohms) Headroom: 18 dB Frequency Response: 192.0 kHz: 20 Hz–60 kHz (+0/-0.4 dB), 20 Hz–90 kHz (+0/-3 dB) 176.4 kHz: 20 Hz–60 kHz (+0/-0.5 dB), 20 Hz–80 kHz (+0/-2 dB) 96.0 kHz: 20 Hz–44 kHz (+0/-0.2 dB) 88.2 kHz: 20 Hz–40 kHz (+0/-0.2 dB) 48.0 kHz: 20 Hz–22 kHz (+0/-0.2 dB) 44.1 kHz: 20 Hz–20 kHz (+0/-0.2 dB) Residual Noise Level: -101 dBu typ. (IHF-A) Dynamic Range: 115 dB typ. | | Power Supply | USB bus power | | Current Draw | 500 mA | | Dimensions | 4.313 x 2.56 x .7 (108 x 65 x 16 mm) | | Weight | 11 oz (300 g) | | Package Weight | 0.7 lb | | Box Dimensions (LxWxH) | 6.8 x 5.0 x 2.3" | |
The user manual for the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10 can be downloaded in .pdf
format if it did not come with your new headphone amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Roland users keep a unique electronic library
for Roland headphone amplifierss,
where you can use our link to download the user manual for the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10.
The user manual lists all of the functions of the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10,
all the basic and advanced features and tells you how to use the headphone amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Roland service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10. User manuals are also
available on the Roland website under Pro Audio - Recording - Headphone Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Roland Mobile UA USB PCM and DSD DAC and Headphone Amp UA-M10
|
|
|
|
|
