User manual for Rolls RM68 Zone Wolf 2 Mixer RM68
- Manufacturer: Rolls
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Install Sound Mixers
- Safety instructions
- Startup and operation of the install sound mixers
- Tips for setting up your Rolls
- Settings and expert assistance
- Contact Rolls service
- Troubleshooting
- Warranty information
- Price: 299 USD
|
We recommend checking out our discussion threads on the Rolls RM68 Zone Wolf 2 Mixer RM68,
which address similar problems with connecting and setting up Install Sound Mixers Rolls.
|
User manual for the Rolls RM68 Zone Wolf 2 Mixer RM68
The user manual for the Rolls RM68 Zone Wolf 2 Mixer RM68 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Install Sound Mixers.
The Rolls RM68 Zone Wolf 2 Mixer is a rack-mountable 3-microphone, 6-stereo source mixer with outputs for two zones. Mixed signals may be sent to either zone or both. The RM68 features individual volume controls for each input channel and for each zone. The zones also have individual bass and treble controls.
|
If you own a Rolls install sound mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rolls RM68 Zone Wolf 2 Mixer RM68 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Rolls RM68 Zone Wolf 2 Mixer RM68:
Input Impedance | Mic: 600 ohms (XLR) Source: 22 k ohms (RCA) Bus: 22 k ohms (1/4") | Output Impedance | 51 ohms | Maximum Input Level | Mic: -14 dBV (Balanced) Source: +24 dB | Maximum Output Level | +17 dBV | Input Connectors | 3 x 3-Pin XLR Female 6 x RCA Stereo Pairs 2 x 1/4" Bus | Output Connectors | 2 x Pairs of 1/4" Right and Left Outputs, Unbalanced | Controls Front Panel | 1 x On/Off Switch 2 x Zone Level Control Knobs 2 x Treble Knobs 2 x Bass Knobs 6 x Volume Level Sliders 6 x Zone Selector Switches | Controls Rear Panel | Talkover On/Off Switch | Phantom Power | +12VDC | Maximum Input Gain | Mic: 60 dB Source: 26 dB | Tone Control | 12 dB Boost/Cut, 250Hz Center | Signal to Noise Ratio | 106 dB | Total Harmonic Distortion (THD) | Less than 0.003% | Common Mode Rejection Ratio | 52 dB (Mic) | Dimensions (WxHxD) | 19 x 1.75 x 6" (483 x 45 x 152mm) | Weight | 5 lbs (2.3 kg) | Package Weight | 5.65 lb | Box Dimensions (LxWxH) | 22.0 x 8.0 x 4.0" | |
The user manual for the Rolls RM68 Zone Wolf 2 Mixer RM68 can be downloaded in .pdf
format if it did not come with your new install sound mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rolls users keep a unique electronic library
for Rolls install sound mixerss,
where you can use our link to download the user manual for the Rolls RM68 Zone Wolf 2 Mixer RM68.
The user manual lists all of the functions of the Rolls RM68 Zone Wolf 2 Mixer RM68,
all the basic and advanced features and tells you how to use the install sound mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rolls service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rolls RM68 Zone Wolf 2 Mixer RM68. User manuals are also
available on the Rolls website under Pro Audio - Installation Sound - Install Sound Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Rolls RM68 Zone Wolf 2 Mixer RM68 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Rolls RM68 Zone Wolf 2 Mixer RM68
|
|