User manual Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V
Operating instructions and pdf manual for use - Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V User manual, User manual Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V, Rupert, Neve, Designs, Portico, 5042, 2-Channe
User manual for Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V
Manufacturer: Rupert Neve Designs
Basic description and contents of package
Product classification: Pro Audio - Recording - Dynamics Processors
Safety instructions
Startup and operation of the dynamics processors
Tips for setting up your Rupert Neve Designs
Settings and expert assistance
Contact Rupert Neve Designs service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V,
which address similar problems with connecting and setting up Dynamics Processors Rupert Neve Designs.
User manual for the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V
The user manual for the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V provides
necessary instructions for the proper use of the product Pro Audio - Recording - Dynamics Processors.
The vertical Rupert Neve Designs Portico 5042 2-Channel Tape Emulator is designed to bring the sound and harmonic content of tape to your digital recordings. It features a transformer-coupled line amplifier that feeds an actual tape drive circuit coupled to a replay amplifier EQ'd to emulate magnetic tape.
Each of the 5042's 2 channels has a pre-tape circuit trim knob along with adjustable saturation, allowing you to dial in the amount of the effect desired. The IPS button allows you to select between 7 and 15 IPS, emulating commonly used inches per second tape speed settings.
If you own a Rupert Neve Designs dynamics processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V:
With Gain at Unity: Better than -100 dBu, measured at main output, un-weighted, 400 Hz to 22 kHz, terminated 40 Ω, balanced
Frequency Response
Main Output, measured at +10 dBu, trim at unity: @ 10 Hz: -0.5 dB @ 200 kHz: -3 dB
Maximum Output Level
Balanced and Floating Transformer Output: +25 dBu
THD + N
Better than 0.0015% @ 1 kHz, +20 dBu output level, no load 0.250% typical; Mostly 2nd and 3rd Harmonic @ 20 Hz, +20 dBu output level, no load
Crosstalk
Measured Channel to Channel: Better than 90 dB @ 16 kHz
Output
Buss: Output is designed to feed the RND 5014 Buss-mixer, Monitor Amplifier at the internal system level of 2.5 dBu. Output level of the Rupert Neve Designs 5014 is then equal to that of the 5042
Gain Trim at Unity, Saturation at Minimum: +25 dBu Gain trim at Unity, Saturation at Maximum: +6 dBu
Noise
Measured at Main Output, un-weighted, 400 Hz to 22 kHz, input terminated 40 Ω, Balanced: With Gain at Unity, Saturation control at Minimum: Better than -70 dBu With Gain at Unity, Saturation control at Maximum: Better than -90 dBu
Frequency Response
Tape engaged, 7.5 IPS: -3 dB @ 16 kHz Tape engaged, 15 IPS: -3 dB @ 20 kHz
Low frequency response varies with input gain and saturation settings
THD + N
Tape Engaged: Approximately 1-2% 2nd and 3rd Harmonic below 1 kHz
Crosstalk
Measured Channel-to-Channel, Maximum Saturation: Better than 80 dB @ 16 kHz
The user manual for the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V can be downloaded in .pdf
format if it did not come with your new dynamics processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rupert Neve Designs users keep a unique electronic library
for Rupert Neve Designs dynamics processorss,
where you can use our link to download the user manual for the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V.
The user manual lists all of the functions of the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V,
all the basic and advanced features and tells you how to use the dynamics processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rupert Neve Designs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V. User manuals are also
available on the Rupert Neve Designs website under Pro Audio - Recording - Dynamics Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V - no comments have been made yet - be the first to add a comment
Please, send me the user manual for Ibanez M510E-BS Mandolin in PDF. Thak You!...Vortex 8x42 HD Talon binocular Manual - Vortex Talon HD 8x42 Roof Prism Binocular TLN-4208-HD Posted by: Pierre Gagnon 2024-04-12 23:06:37
Question and answer discussion forum concerning user instructions and resolving problems with the Rupert Neve Designs Portico 5042 2-Channel Tape Emulator 5042-V - no comments have been made yet - be the first to add a comment