|
User manual for Rupert Neve Designs Portico 511 Mic Preamp 511
- Manufacturer: Rupert Neve Designs
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Microphone Preamps
- Safety instructions
- Startup and operation of the microphone preamps
- Tips for setting up your Rupert Neve Designs
- Settings and expert assistance
- Contact Rupert Neve Designs service
- Troubleshooting
- Warranty information
- Price: 545 USD
|
We recommend checking out our discussion threads on the Rupert Neve Designs Portico 511 Mic Preamp 511,
which address similar problems with connecting and setting up Microphone Preamps Rupert Neve Designs.
|
User manual for the Rupert Neve Designs Portico 511 Mic Preamp 511
The user manual for the Rupert Neve Designs Portico 511 Mic Preamp 511 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Microphone Preamps.
The Portico 511 Mic Preamp from Rupert Neve Designs is a single channel, transformer-balanced microphone preamp that brings the features and performance of the full-sized Portico outboard rack units to the 500-series format. The 511 provides 66dB of gain, and a +/- 6dB Trim knob is provided for fine tuning. Texture can be added by pushing the Silk button, which activates dedicated circuitry. The desired amount of texture can be dialed in with a knob, which adds harmonic content–creating tones that are reminiscent of vintage Neve equipment.
The 511 isn't limited to working with microphones. With the Gain knob set at 0 dB, the unit is capable of accepting line-level signals. Condenser microphones and active DI boxes can be powered by engaging the 48V phantom power button on the 511. An illuminated Polarity button inverts the signal when pressed. A variable High-Pass Filter can be engaged by an illuminated button as well, and a knob enables you to sweep between 20-250 Hz. An eight-segment LED meter allows you to visually monitor the output. A 500-Series power supply/rack is required for operation.
|
If you own a Rupert Neve Designs microphone preamps and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rupert Neve Designs Portico 511 Mic Preamp 511 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Rupert Neve Designs Portico 511 Mic Preamp 511:
| Number of Channels | Single | | Inputs | 1x XLR, balanced | | Output | 1x XLR, transformer-balanced | | Phantom Power | 48V
Phantom Power Supplied by the 500 series rack power supply. Switch selectable on faceplate. | | Maximum Output Level | +23dBu | | Frequency Response | Main output, no load: +/- 0.1dBu from 10Hz to 31.5kHz -2.6dB @ 120kHz | | THD | Total Harmonic Distortion and Noise @ 1 kHz, +20dBu output level, no load: better than 0.0025% @ 20 Hz, +20dBu output level, no load
0.025% Typical (2nd and 3rd harmonic
Total Harmonic Distortion and Noise with SILK engaged TEXTURE @ min @ 100Hz, +20dBu input level, no load 0.015%, mostly 3rd harmonic (typical)
TEXTURE @ max: @ 100Hz, +20dBu input level, no load 2%, mostly 2rd harmonic (typical) | | Noise | Noise measured at Main Output, un-weighted, 22 Hz - 22 kHz, source impedance 150 Ohms balanced. Noise performance can vary depending on the 500 series and/or interference from stray magnetic fields.
EIN: -126 dB 150 ohm | | Gain | Unity Gain: better than -103dBV
With Gain @ +66 dB: better than -60dBV | | Gain Range | Gain Unity up to +66 dB in 6 dB steps
Trim continuously adjustable from -6 dB to +6 dB | | Controls | 1x Trim knob
1x Gain knob
1x High-Pass Filter knob
1x Texture knob
1x Phantom Power button
1x Polarity Reverse button
1x High-Pass Filter button
1x Silk button | | High-Pass Filter | High-Pass Filter continuously variable swept frequency from 20 Hz to 250 Hz
Slope: 12 dB/Octave | | Meter | 8 segment LED meter | | Power Requirements | Power Requirements @ +/-16VDC 100mA | | Dimensions | Not specified by manufacturer | | Weight | Not specified by manufacturer | | Package Weight | 2.0 lb | | Box Dimensions (LxWxH) | 10.2 x 7.8 x 2.0" | |
The user manual for the Rupert Neve Designs Portico 511 Mic Preamp 511 can be downloaded in .pdf
format if it did not come with your new microphone preamps, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rupert Neve Designs users keep a unique electronic library
for Rupert Neve Designs microphone preampss,
where you can use our link to download the user manual for the Rupert Neve Designs Portico 511 Mic Preamp 511.
The user manual lists all of the functions of the Rupert Neve Designs Portico 511 Mic Preamp 511,
all the basic and advanced features and tells you how to use the microphone preamps.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rupert Neve Designs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rupert Neve Designs Portico 511 Mic Preamp 511. User manuals are also
available on the Rupert Neve Designs website under Pro Audio - Recording - Microphone Preamps.
Question and answer discussion forum concerning user instructions and resolving problems with the Rupert Neve Designs Portico 511 Mic Preamp 511 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Rupert Neve Designs Portico 511 Mic Preamp 511
|
|
|
|
|
