|
User manual for Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE
- Manufacturer: Sentech
- Basic description and contents of package
- Product classification: Professional Video - Industrial & Multi-Purpose Cameras
- Safety instructions
- Startup and operation of the industrial & multi-purpose cameras
- Tips for setting up your Sentech
- Settings and expert assistance
- Contact Sentech service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE,
which address similar problems with connecting and setting up Industrial & Multi-Purpose Cameras Sentech.
|
User manual for the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE
The user manual for the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE provides
necessary instructions for the proper use of the product Professional Video - Industrial & Multi-Purpose Cameras.
The GigE CMOSIS Series STC-CMC4MPOE 4MP PoE Color Network Camera from Sentech is a high-performance industrial camera that uses a 1" Progressive Scan CMOS sensor to capture color images at a resolution of 4MP. The camera uses the GigE Vision interface standard that provides a framework for transmitting high-speed video and related control data over Ethernet networks. The support for PoE allows using a single cable to provide both data connection and electrical power to the camera. This camera accepts C-mount lenses and incorporates the DC auto iris lens driver.
|
If you own a Sentech industrial & multi-purpose cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE:
| Image Sensor | 1" Color CMOS (CMOSIS CMV4000) | | Scanning System | Progressive | | Lens Mount | C mount | | Optical Filter | No filter | | Accuracy | Optical Center
Positional Accuracy in H and V Directions: ±0.3 mm
Rotational Accuracy of H and V: ±1.0° | | Shutter Type | Global | | Total Pixels (H x V) | 2048 x 2048 | | Active Pixel Count (H x V) | 2048 x 2048 | | Cell Size | 5.5 (H) x 5.5 (V) μm | | Sync System | Internal | | Vertical Frequency | 25 Hz at full resolution (12.5 Hz @ 10-bit for Ethernet bandwidth limitation), frame rate depends on the AOI setting | | Horizontal Frequency | 54.4 kHz | | Pixel Frequency | 120 MHz | | Video Output Format | Digital 8, 10-bit raw data or RGB 8-bit (Default: 8-bit raw) | | Exposure Time | Preset Continuous Mode: 25 to 2000 ms
Preset Trigger Mode: 25 to 2000 ms
Pulse Width Mode: 25 to 2000 ms | | Automatic Light Compensation (ALC) | Automatic exposure (AE) and automatic cain control (AGC) (on/off) (adjustable via communication), (Default: AE off, AGC on) | | Gain | x1 (default) to x3 | | Gamma | Gamma 1.0 (factory default) or uploadable gamma table (Default: 1) | | White Balance | Auto, manual, push to set, white balance modes are available for both raw data and RGB outputs (Default: Off) | | Other Functions | AOI Function: Variable AOI setting via the communication
Color Interpolation: Available in RGB output (Default: On) | | Operating Mode | Edge preset trigger, pulse width trigger (Default: Off) | | Connector | 1 x RJ45 | | Interface | IEEE802.3 (1000 Base-T) | | Protocol | GigE Vision 1.2 and GenICam 2.0 compliant | | Communication | UART communication through Ethernet port | | Operating Temperature | Minimum: 23°F (-5° C) environmental temperature
Maximum: Camera housing temperature (top plate) shall not exceed 149°F (65°C) [corresponds to an environmental temperature of approximately 95°F (35°C)] | | Storage Temperature | -22 to 149°F (-30 to 65°C) environmental temperature | | Vibration | 20 Hz to 200 Hz to 20 Hz (5 minutes per cycle), acceleration 10G, 3 directions 30 minutes each | | Shock | Acceleration 38G, half amplitude 6 ms, 3 directions 3 times each | | Compliant Standards | EMS: EN61000-6-2, EMI: EN55011 | | RoHS Compliant | Yes | | Input Voltage | +10.8 to +26.4 VDC | | Material | Aluminum (AC) | | I/O | 1 x opt-isolated input; 2 x open collector outputs (+3.3 V)
Connector: HR10A-7R-6PB (Hirose) or equivalent | | Camera Mount Screws | 2 x 1/4" Tripod screw holes (1 each on top and bottom plates)
12 x M4 screws holes (4 each on top and bottom plates, 2 each on both side plates) | | Dimensions (WxHxD) | 1.4 x 1.4 x 2.2" (3.5 x 3.5 x 5.6 cm) (excluding connectors) | | Weight | Approximately 4.6 oz (130.0 g) | | Package Weight | 2.3 lb | | Box Dimensions (LxWxH) | 1.0 x 1.0 x 1.0" | |
The user manual for the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE can be downloaded in .pdf
format if it did not come with your new industrial & multi-purpose cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Sentech users keep a unique electronic library
for Sentech industrial & multi-purpose camerass,
where you can use our link to download the user manual for the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE.
The user manual lists all of the functions of the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE,
all the basic and advanced features and tells you how to use the industrial & multi-purpose cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Sentech service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE. User manuals are also
available on the Sentech website under Professional Video - Industrial & Multi-Purpose Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Sentech GigE CMOSIS Series STC-CMC4MPOE 4MP PoE STC-CMC4MPOE
|
|
|
|
|
