| Imager | 1/3" Interline SXVGA CCD: ICX445AQA |
| Picture Element | HD active: 1280 (H) x 720 (V) |
| Chip Size | 6.26 (H) x 5.01 (V) mm |
| Cell Size | 3.75 (H) x 3.75 (V) μm |
| Scene Illumination | Minimum: 5 lux at F1.2 at 50% IRE; AGC ON and 1/60 second shutter speed with IR Cut Filter |
| Resolution | 600 TV Lines |
| Sync System | Internal |
| Video Output | HD-SDI (SMPTE292M); YPbPr, 1280 (H) x 720 (V), 60 Hz / 59.94 Hz / 50 Hz |
| Automatic Light Compensation (ALC) | Can be configured via the UART communication, with Auto Electronic Shutter, and AGC |
| Shutter Speed | Adjustable shutter speed via the UART Communication; Up to 1/100,000 seconds at 60 Hz / 59.94 Hz or up to 1/83,947 seconds at 50 Hz |
| Gain | AGC or Fixed gain, selectable via the UART communication; Gain range: 0 to 18.3 dB
Digital: Up to 5.9866 dB |
| Gamma | 1.0, 0.9, 0.8, 0.7, 0.6, 0.5, 0.45, 0.3 or manual gamma; Gamma selectable via the UART communication |
| White Balance | Auto / Manual / Push-to-set; selectable via the UART communication |
| Mirror Image | Normal Image and Horizontal Flip are selectable mirror image via the UART communication |
| Presets | DSP: 28 DSP presets; Selectable picture mode via the UART communication |
| Generators | Line Generator: Both horizontal and vertical available with all colors; Thickness adjustable via the UART communication
Shadow Mask Generator: Horizontal and vertical with shading level adjustment via the UART communication |
| Communication | +3.3 V UART communication via 3.5ф stereo jack |
| Character Generator | Built-in character generating function via the UART communication |
| Pixel Blemish Collection | Up to 64 pixel blemish static collection |
| Optical Filter | IR cut filter included |
| Lens Mount | CS mount |
| Interface Connector | Video Output: BNC connector
Power Input: 12V power jack
External Control: 3.5ф stereo jack with SW board
Communication: 3.5ф stereo jack |
| Button | Primary SW Initial press button function: push-to-set white balance Initial hold button function: Auto white balance (Function is selectable via the UART communication) |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -22 to 149°F (-30 to 65°C) |
| Vibration | 20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration: 10G, 30 min., XYZ each directions |
| Shock | Acceleration: 38G, half amplitude 6 ms, 3 times XYZ each directions |
| Standard Compliance | EMS: EN61000-6-2, EMI: 55011 |
| RoHS | RoHS compliant |
Question and answer discussion forum concerning user instructions and resolving problems with the Sentech STC-HD133SDI-CS HD-SDI CCD Color Camera STC-HD133SDI-CS - no comments have been made yet - be the first to add a comment