|
User manual for Snake River Prototyping The Tray Camera Support (Black) SRPTRY
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
- Manufacturer: Snake River Prototyping
- Basic description and contents of package
- Product classification: Photography - Underwater Photography - Arms & Accessories
- Safety instructions
- Startup and operation of the arms & accessories
- Tips for setting up your Snake River Prototyping
- Settings and expert assistance
- Contact Snake River Prototyping service
- Troubleshooting
- Warranty information
- Price: 123 USD
|
We recommend checking out our discussion threads on the Snake River Prototyping The Tray Camera Support (Black) SRPTRY,
which address similar problems with connecting and setting up Arms & Accessories Snake River Prototyping.
|
User manual for the Snake River Prototyping The Tray Camera Support (Black) SRPTRY
The user manual for the Snake River Prototyping The Tray Camera Support (Black) SRPTRY provides
necessary instructions for the proper use of the product Photography - Underwater Photography - Arms & Accessories.
The Tray in black from Snake River Prototyping adds stability, comfort, and mounting options for underwater shooting with your DSLR camera, small camcorder, or action camera. The Tray features adjustable handles with rubber grips made by ODI and a CNC-machined aluminum mounting platform. A tripod mount for GoPro HERO cameras and a 1/4"-20 thumb screw come included.
The wedge-shape design of the Tray puts the handles behind the camera, ideal for wide-angle for keeping your hands out of the shot with cameras and lenses with wide viewing angles, such as the GoPro HERO cameras. In addition, the GoPro can be tilted down and the Tray becomes a duo-pod with the wedge shape lifting the camera above the surface the duo-pod is set on. This makes it possible to set the Tray down in a sandy spot on the bottom of the ocean and for capturing self-portraits or shy creatures. While designed for underwater use, the Tray can also be used handheld above water or on tripods.
The two handles mount into slots down each wing of the Tray via the included T-bolts. When the handles are loosened, the T-bolts slide in the slots and allow you to adjust the position of the handles to your comfort. This lets you put one handle close to your DSLR camera so that you don't have to remove your hand in order to operate the shutter on the camera. The high-quality rubber grips are made by ODI and have aluminum locking rings that tighten onto the top and bottom of the handles so that the grips will not twist or break down with use.
Two 1/4"-20 threaded and two 1/4" unthreaded mounting holes located at the front of the Tray provide mounting options for a variety of cameras and camera mounts. There is also a 1/4"-20 threaded mount on the top of each handle for adding LED lights or other accessories. Two additional 1/4" unthreaded holes are provided on the left and right ends of the Tray for mounting a wrist lanyard or retractable lanyard options.
|
If you own a Snake River Prototyping arms & accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Snake River Prototyping The Tray Camera Support (Black) SRPTRY in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Snake River Prototyping The Tray Camera Support (Black) SRPTRY:
| Material of Construction | 6061 T6 aluminum (CNC machined), Type III hard-coat black anodized
Rubber grips | | Mounting Holes | 4 x 1/4"-20 threaded (1 on each handle and 2 in front)
4 x 1/4" non-threaded (2 in front and 1 at end of each wing) | | Dimensions | Handles with Nylon Screws (L x Diam.): 5.50 x 1.25" (13.97 x 3.18 cm)
Tray: 7.625 x 7.625 x 0.250" (19.368 x 19.368 x 0.635 cm) | | Weight | 19.5 oz (552.8 g) | | Package Weight | 1.3 lb | | Box Dimensions (LxWxH) | 7.0 x 6.2 x 1.0" | |
The user manual for the Snake River Prototyping The Tray Camera Support (Black) SRPTRY can be downloaded in .pdf
format if it did not come with your new arms & accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Snake River Prototyping users keep a unique electronic library
for Snake River Prototyping arms & accessoriess,
where you can use our link to download the user manual for the Snake River Prototyping The Tray Camera Support (Black) SRPTRY.
The user manual lists all of the functions of the Snake River Prototyping The Tray Camera Support (Black) SRPTRY,
all the basic and advanced features and tells you how to use the arms & accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Snake River Prototyping service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Snake River Prototyping The Tray Camera Support (Black) SRPTRY. User manuals are also
available on the Snake River Prototyping website under Photography - Underwater Photography - Arms & Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Snake River Prototyping The Tray Camera Support (Black) SRPTRY - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Snake River Prototyping The Tray Camera Support (Black) SRPTRY
|
|
|
|
|
