PDF-MANUALS.com | User manual here!
User manual

User manual SPL Masterbay S Mastering Interface SPLMASTS

Operating instructions and pdf manual for use - SPL Masterbay S Mastering Interface SPLMASTS User manual, User manual SPL Masterbay S Mastering Interface SPLMASTS, SPL, Masterbay, S, Mastering, Interface, SPLMASTS, Video


User manual for SPL Masterbay S Mastering Interface SPLMASTS

SPL  Masterbay S Mastering Interface SPLMASTS
  • Manufacturer: SPL
  • Basic description and contents of package
  • Product classification: Pro Audio - Recording - Analog Recording Mixers
  • Safety instructions
  • Startup and operation of the analog recording mixers
  • Tips for setting up your SPL
  • Settings and expert assistance
  • Contact SPL service
  • Troubleshooting
  • Warranty information
We recommend checking out our discussion threads on the SPL Masterbay S Mastering Interface SPLMASTS, which address similar problems with connecting and setting up Analog Recording Mixers SPL.



User manual for the SPL Masterbay S Mastering Interface SPLMASTS

The user manual for the SPL Masterbay S Mastering Interface SPLMASTS provides necessary instructions for the proper use of the product Pro Audio - Recording - Analog Recording Mixers.

The Model 1150 Masterbay S Mastering Interface from SPL is a processing hub where you can connect up to four stereo processors, and add additional and orderly control to the mastering and audio sweetening process.

The classic patch bay allows you to easily route signals between different signal sources, processors and other audio gear. All connected devices can be tapped at any point in the signal path by simply making the adequate connections in the patch bay. This can be very practical when working on projects, since you can set up the audio path according to a specific production without having to change anything until the production is finished; this is frequently the case during mixdown.

However, in the mastering stage, the needs of an engineer often go well beyond this. Even a direct A/B comparison between two processors or two different signal paths can prove unfeasible with a patch bay, often resulting in the need for loudness compensation after processing, comfortable fine adjustment of input and output levels (level matching),or an adequate level control to dynamically fade the signal.

The MasterBay S fulfills all of these requirements and goes even a couple of decisive steps forward. Its all-in-one simplified yet flexible switching and control functions make it easier to achieve the best results with the available equipment. Innovative and pragmatic functions, conceived to simplify and improve the comparison process, give you a qualitative edge in mastering applications while saving time.

Using the MasterBay S as the central interface for all your hardware gear mimizes the actual conversions taking place, regardless of the number of processors used. Due to its engineered quality, the MasterBay S not only pampers the signal, but also becomes a key element in the audio production stage where it is put to use.
If you own a SPL analog recording mixers and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the SPL Masterbay S Mastering Interface SPLMASTS in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the SPL Masterbay S Mastering Interface SPLMASTS:
Specifications
    Inputs and Outputs Differential amplifier, electronically balanced/transformerless Sockets - Main Input: XLR,
    Insert Return 1 to 4: XLR
    DAW Return: XLR Nominal input level: +4 dBu
    Input Impedances Main Input: ca. 20 kOhms unbalanced, ca. 40 kOhms balanced
    Insert 1 Return: ca. 20 kOhms unbalanced, ca. 40 kOhms balanced
    Data above applies if inserts 2 and 3 are not active.
    If inserts 2 and 3 are active, input impedance depends on the units connected to inserts 2 and/or 3.

    Insert 2 Return: ca. 20 kOhms unbalanced, ca. 40 kOhms balanced
    Data above applies if insert 3 is not active.
    If insert 3 is active, input impedance depends on the units connected to insert 3.

    Insert 3 Return: ca. 20 kOhms unbalanced, ca. 40 kOhms balanced

    Insert 4 Return: ca. 20 kOhms unbalanced, ca. 40 kOhms balanced

    DAW Return: ca. 20 kOhms unbalanced, ca. 40 kOhms balanced
    Output Impedances Rec. Output: ca. 75 Ohms unbalanced, ca. 150 Ohms balanced
    Insert 1 Send: ca. 75 Ohms unbalanced, ca. 150 Ohms balanced

    Insert 2 Send: ca. 75 Ohms unbalanced, ca. 150 Ohms balanced
    Data above applies if insert 1 is not active.
    If insert 1 is active, input impedance depends on the units connected to insert 1.

    Insert 3 Send: ca. 75 Ohms unbalanced, ca. 150 Ohms balanced
    Data above applies if inserts 1 and 2 are not active.
    If inserts 1 and 2 are active, input impedance depends on the units connected to inserts 1 and/or 2.

    Insert 4 Send: ca. 75 Ohms unbalanced, ca. 150 Ohms balanced
    Data above applies if insert 4 is active or all inserts are not active.

    Monitor Output: ca. 75 Ohms unbalanced, ca. 150 Ohms balanced
    Metering Output: ca. 10 Ohms unbalanced; ca. 20 Ohms balanced
    Volume Control Ranges

    Input Trim: -6 dB to +6 dB
    Insert Trim: -6 dB to +6 dB
    Master Fader: -80 dB to +7 dB
    Compensation Level: -12 dB to 0dB
    Measurements Max. Input Level: 23.0 dBu
    Max. Output Level: 23.0 dBu
    Frequency Range: 10 Hz to 100 kHz /  -3 dB: <10 Hz to 200 kHz
    CMR - Main Input: >70 dB, DAW Return: >70 dB, (@ 1 kHz, 0 dBu input level, unity gain)
    THD&N - Rec. Output: 0.0015%, Monitor Output: 0.0015%, (1 kHz, +4 dBu input level, unity gain)
    S/N ratio (A-weighted) - Rec. Output: < -99.0 dB, Monitor Output < -98.0 dB
    Crosstalk L/R (@ 1 kHz) <98.0 dB
    Dynamic range (not weighted) - Rec. Output: 118.5 dB, Monitor Output: 116.0 dB
    Power Supply Toroidal transformer
    Power Supply for LEDs & Relays: 12V / 6.3 VA
    Power Supply for Audio: 2 x 18V / 16 VA, LEDs & Relays: 12 V / 6.3 VA
    Fuses 230 VAC: 50 Hz, 1A; 115 VAC: 60 Hz, 2A
    Voltage Selector 115V / 230 VAC
    Power Consumption 24 W
    Dimensions (W x H x D) 19 x 3.5 x 9.3" (482 x 88 x 237 mm)
    Depth including knobs and sockets: 10.4" (265 mm)
    Weight 12.1 lb (5.5 kg)
    The user manual for the SPL Masterbay S Mastering Interface SPLMASTS can be downloaded in .pdf format if it did not come with your new analog recording mixers, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other SPL users keep a unique electronic library for SPL analog recording mixerss, where you can use our link to download the user manual for the SPL Masterbay S Mastering Interface SPLMASTS.

    The user manual lists all of the functions of the SPL Masterbay S Mastering Interface SPLMASTS, all the basic and advanced features and tells you how to use the analog recording mixers. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from SPL service.

    If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the SPL Masterbay S Mastering Interface SPLMASTS. User manuals are also available on the SPL website under Pro Audio - Recording - Analog Recording Mixers.



    Discussion Question and answer discussion forum concerning user instructions and resolving problems with the SPL Masterbay S Mastering Interface SPLMASTS - no comments have been made yet - be the first to add a comment

    Post new comment/question/response regarding the SPL Masterbay S Mastering Interface SPLMASTS

    Fields marked with * must be filled out.
    Your name *:
    E-mail :
    Subject *:
    Message text *:
    Enter the code *:
    (spam block)
    "manual"
    If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

     

    Can't find what you're looking for? Try Google Search!



    Current discussions
    Most recently discussed products:

    Simmons 6-24x50 - Simmons 6-24x50 Predator Varmint Riflescope 656245
    Posted by: Stuart Williams
    2024-03-26 12:36:48

    I have located manual for this on your site but how do I download / print it please ?...
    USER MANUAL TSP2 17 BUN - Telmax TSP2-17-BUN Dual 17" Presidential TSP2-17BUN
    Posted by: AYO
    2024-03-26 10:07:35

    MANUAL REQUIRED TO SET UP...
    lens servo - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
    Posted by: julia yoko
    2024-03-25 22:07:20

    i would like to know where the lens manual can be found...
    NEPVS14-17 - ITT Night Enforcer PVS-14 Pinnacle Night Vision ITTE-NEPVS14-17
    Posted by: Keller Bradshaw
    2024-03-25 17:57:35

    Hi, I would like a user manual for the NEPVS14-17...
    YS 03 above water - Sea & Sea YS-03 Universal Lighting System SS-03541
    Posted by: sameer
    2024-03-24 22:26:52

    Hello Would like to know is it safe to use YS 03 strobe outside water for practice purpose ? Regards...

    Uploaded instruction manuals
    Upload a link to an instruction manual for a depicted product here:

    Link format "http://www.link2manual.com/manual.pdf"

    Enter the code: "manual"






    PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
    sitemap.txt alx