|
User manual for Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2
- Manufacturer: Studio Projects
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Large Diaphragm Condenser
- Safety instructions
- Startup and operation of the large diaphragm condenser
- Tips for setting up your Studio Projects
- Settings and expert assistance
- Contact Studio Projects service
- Troubleshooting
- Warranty information
- Price: 500 USD
|
We recommend checking out our discussion threads on the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2,
which address similar problems with connecting and setting up Large Diaphragm Condenser Studio Projects.
|
User manual for the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2
The user manual for the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Large Diaphragm Condenser.
The LSD2 Dual-Capsule Stereo-Condenser Microphone from Studio Projects is a stereo microphone comprised of two separate dual-membrane solid-state microphones contained within a single housing. Its capsules are mounted in close proximity on a vertical axis. The upper-capsule assembly has the ability to rotate 270° horizontally, relative to the lower capsule. Two three-way switches control the polar response, high-pass filtering, and -10 dB pad for each capsule (the switches on the front of the body correspond to the lower fixed capsule, while the switches 180° opposite on the back of the microphone control the rotating upper capsule). It is the combination of capsule articulation and independent pattern-switching which allows a user to achieve all manner of coincident-pair stereophonic recording techniques. Due to the close proximity of the capsules, there is no phase cancellation resulting from time delay between the two signals. This translates into excellent mono compatibility.
The inner workings of the LSD2 are essentially that of two Model C3 microphones. The capsules are 1.06" diameter, dual membrane,Braunmuhl-Weber design. These are independently coupled through low-noiseamplifiers based on FET-driven discrete balanced-output stages. The outer housing is plated brass with a single-layer brass wire-mesh grille surrounding the capsules.
|
If you own a Studio Projects large diaphragm condenser and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2:
| Operating Principle | Pressure Gradient | | Transducer | Condenser | | Diaphragm | 1.06" (26.92 mm) | | Polar Pattern | Cardioid, Figure 8, Omnidirectional | | Frequency Range | 30 Hz to 20 kHz | | Signal to Noise Ratio | 76 dB | | Equivalent Noise Level | 28 dB CCIR
18 dB A-Weighted | | Maximum SPL | 132 dB SPL 1%
142 dB SPL 1% with 10 dB Pad Engaged | | Impedance | 200 ohms | | Load Impedance | 1200 ohms | | Sensitivity | 12 mV/PA | | Power Requirements | 24 V | | Low-Cut Filter | Yes, 6 dB/Octave @ 150 Hz | | Pad | Yes, 10 dB
Yes, 20 dB | | Output Connectors | 7-pin XLR | | Operating Current Consumption | 2.5 mA | | Diameter | 2.1" (53.34 mm) | | Weight | 1.8 lb (0.82 kg) | | Package Weight | 10.05 lb | | Box Dimensions (LxWxH) | 16.8 x 13.8 x 6.0" | |
The user manual for the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2 can be downloaded in .pdf
format if it did not come with your new large diaphragm condenser, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Studio Projects users keep a unique electronic library
for Studio Projects large diaphragm condensers,
where you can use our link to download the user manual for the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2.
The user manual lists all of the functions of the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2,
all the basic and advanced features and tells you how to use the large diaphragm condenser.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Studio Projects service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2. User manuals are also
available on the Studio Projects website under Pro Audio - Recording - Large Diaphragm Condenser.
Question and answer discussion forum concerning user instructions and resolving problems with the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Studio Projects LSD2 Dual-Capsule Stereo-Condenser LSD-2
|
|
|
|
|
