|
User manual for Tektronix SPG600 Sync Pulse Generator SPG600
- Manufacturer: Tektronix
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators
- Safety instructions
- Startup and operation of the video & audio signal generators
- Tips for setting up your Tektronix
- Settings and expert assistance
- Contact Tektronix service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Tektronix SPG600 Sync Pulse Generator SPG600,
which address similar problems with connecting and setting up Video & Audio Signal Generators Tektronix.
|
User manual for the Tektronix SPG600 Sync Pulse Generator SPG600
The user manual for the Tektronix SPG600 Sync Pulse Generator SPG600 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators.
The SPG600 Sync Pulse Generator from Tektronix provides synchronization and test signals for analog and digital facilities in both NTSC/525 and PAL/625 environments. The unit can be used as a stable master or slave sync signal generator.
A special "Stay GenLock" mode ensures that no loss of test signal or black outputs occurs with momentary loss of synchronization at the genlock reference input. When the genlock signal is reapplied, the feature gradually reacquires lock to minimize disruption and will not cause noticeable glitches. Genlock source can be NTSC/PAL Black Burst, NTSC/PAL Sync, or CW. When using CW lock, genlock timing can be adjusted on all the NTSC or PAL color frames.
The unit also offers (4) Black Burst output channels that can be independently timed over the full NTSC or PAL color frame range. Black Burst output channels can be configured as a Black Burst or test signal output.
Beyond various video output options, the unit also offers both analog audio and AES/EBU digital outputs. The functionality of this unit can be enhanced by adding separately available upgrades and service options, including calibrations, output expansion, and country-specific power supplies, among other additions. This model offers a full rack-width chassis.
|
If you own a Tektronix video & audio signal generators and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Tektronix SPG600 Sync Pulse Generator SPG600 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Tektronix SPG600 Sync Pulse Generator SPG600:
| Video | SERIAL DIGITAL VIDEO OUTPUTS
SDI Black Output: 1/2
Channels:
(1) black generator and (1) test signal generator
(test signal can be distributed to both channels)
SD SDI Test Signal Output:
525: 100%, 75%, and SMPTE Color Bars, Linearity, Flat Field, Monitor, Multiburst, Pulse & Bar, Sweep, SDI, Timing, Other, Rec 801
625: 100%, 75% Color Bars and 100%, 75% Color Bars over red, Linearity, Flat Field, Monitor, Multiburst, Pulse & Bar, Sweep, SDI, Timing, Other, Rec 801
Standards:
ITU-R BT 601, 656, EBU Tech 3267, SMPTE 125M, 244M, 259M, 272M, RP165, P178
Format: 525-270, 625-270 (270 Mbps).
Output connector: BNC
Output Impedance: 75 Ohms
Output Amplitude: 800 mV +/-10%
Rise and Fall Time: 0.4 to 1.5ns (20 to 80%)
Jitter: <0.2 UI
Timing Offset Range: full color frame
Resolution: <1/27 MHz
Return Loss: >15dB (5 to 270MHz)
ID Text: 20 characters maximum
Blinking Interval: Blinking Interval Fast, Slow or OFF.
Logo: Grayscale, 4 level. Blinking Interval Fast, Slow, or OFF
Embedded Audio Signal
Active Channels: 1 to 16 channels (4 groups)
Sample Frequency: 48KHz
Digital Coding: 20 or 24 bits
Audio Tone Frequency (Hz):
Inactive, Silence, 50, 100, 150, 200, 250, 300, 400, 500, 600, 750, 800, 1000, 1200, 1500, 1600, 2000, 2400, 3000, 3200, 4000, 4800, 5000, 6000, 8000, 9600, 10000, 12000, 15000, 16000, 20000
Level: -60 to 0 dBFS, 1 dB steps
Click: 1s, 2s, 3s, 4s, or OFF ANALOG VIDEO OUTPUTS
Analog Video Output:
1/2/3/4 (3 Black Generators and 1 Test Signal Generator)
Test Signal:
NTSC and NTSC No Setup: SMPTE Color Bar, 75% Color Bar, Linearity, Flat Field, Monitor, Multiburst, Pulse & Bar, Sweep, Other
PAL: 75% Color Bar, 100% Color Bar, 75% Color Bar over Red, 100% Color Bar over Red, Linearity, Flat Field, Monitor, Multiburst, Pulse & Bar, Sweep, Other
Format: NTSC, NTSC no setup, and PAL
Output Connector: BNC
Output Impedance: 75 Ohms
Return Loss: >30 dB to 5MHz
Burst Amplitude Accuracy: +/-5%
Sync Amplitude Accuracy: +/-3%
Blanking Level: 50mV
SCH Phase Accuracy: +/-5 degrees
Timing Offset Range: full color frame
ID Text: 20 characters maximum
Blinking Interval: Blinking Interval Fast, Slow, or OFF
Logo: Grayscale, 4 level
Blinking Interval: Fast, Slow, or OFF | | Audio | AES/EBU DIGITAL AUDIO OUTPUTS
Standards:
ANSI S4.40 (AES3); SMPTE 276M (AES3 ID)
Number of Audio Channels:
8 (1+2, 3+4, 5+6, 7+8) for BNC, 4 (1+2, 3+4) for XLR
Required Receiver Termination:
75 Ohms +/-10% for BNC
110 Ohms +/-10% for XLR
Output connector:
4 75 Ohms BNC and 2 XLR (1 of the 2 XLR outputs can be set to AES/EBU or analog audio)
Audio Parameter Frequency (Hz):
Inactive, Silence, 50, 100, 150, 200, 250, 300, 400, 500, 600, 750, 800, 1000, 1200, 1500, 1600, 2000, 2400, 3000, 3200, 4000, 4800, 5000, 6000, 8000, 9600, 10000, 12000, 5000, 16000, 20000
Level: -60 to 0dBFS, 1dB steps
Click: 1s, 2s, 3s, 4s, or OFF
Quantized Resolution: 20 or 24 bits.
Amplitude Unbalanced (BNC): 1V +/-0.1V
Balanced (XLR): 5V ±0.3V
Rise and Fall Time:
30 to 44ns (measured 10 to 90%) to BNC
5 to 30ns (measured 10 to 90%) to XLR
Jitter: <+/-8ns
Timing Offset Range: 160ms
Resolution: 1us
Word Clock Output connector: BNC
Output level: CMOS compatible
Frequency: 48KHz ANALOG AUDIO OUTPUTS
Output Connector:
4 75 Ohms BNC and 2 XLR (1 of the 2 XLR outputs can be set to AES/EBU or analog audio)
Output Impedance: 12 Ohms
Frequency (Hz): Silence 50, 100, 150, 200, 250, 300, 400, 500, 600, 750, 800, 1000, 1200, 1500, 1600, 2000, 2400, 3000, 3200, 4000, 4800, 5000, 6000, 8000, 9600, 10000, 12000, 15000, 16000, 20000
Audio Parameters:
Level: -48 to +12dBU (Resolution 1dB) | | Genlock | REFERENCE INPUT
Input Connector:
(2) BNC connectors, loopthrough
Amplitude:
Nominal +/-6dB (Composite), 1 to 2.5Vp-p (CW)
S/N Ratio:
>40dB SCH
Phase:
Nominal +/-40°
Return Loss: >40dB to 5MHz PERFORMANCE
Pull-in Range: Fsc +/-5ppm
Jitter Burst Lock: <0.5°
Sync Lock: <1ns GENLOCK TIMING OFFSET
Range: full color frame
Resolution: <0.5° of NTSC/PAL subcarrier | | Power | Mains Ranges:
90 to 250V 50/60 Hz
Power Consumption:
<65VA (30W) at 110 or 240VAC | | Dimensions (HxWxD) | 1.72 x 19 x 21.9 (43.6 x 482.5 x 557.5mm) | | Weight | Net weight: 11 lbs (5kg)
Shipping: 19 lbs (8.5kg) | | Package Weight | 22.4 lb | | Box Dimensions (LxWxH) | 30.0 x 23.1 x 6.5" | |
The user manual for the Tektronix SPG600 Sync Pulse Generator SPG600 can be downloaded in .pdf
format if it did not come with your new video & audio signal generators, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Tektronix users keep a unique electronic library
for Tektronix video & audio signal generatorss,
where you can use our link to download the user manual for the Tektronix SPG600 Sync Pulse Generator SPG600.
The user manual lists all of the functions of the Tektronix SPG600 Sync Pulse Generator SPG600,
all the basic and advanced features and tells you how to use the video & audio signal generators.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Tektronix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Tektronix SPG600 Sync Pulse Generator SPG600. User manuals are also
available on the Tektronix website under Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators.
Question and answer discussion forum concerning user instructions and resolving problems with the Tektronix SPG600 Sync Pulse Generator SPG600 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Tektronix SPG600 Sync Pulse Generator SPG600
|
|
|
|
|
