|
User manual for Tektronix WVR5200 Waveform Rasterizer WVR5200
- Manufacturer: Tektronix
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Waveform Monitors & Scopes
- Safety instructions
- Startup and operation of the waveform monitors & scopes
- Tips for setting up your Tektronix
- Settings and expert assistance
- Contact Tektronix service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Tektronix WVR5200 Waveform Rasterizer WVR5200,
which address similar problems with connecting and setting up Waveform Monitors & Scopes Tektronix.
|
User manual for the Tektronix WVR5200 Waveform Rasterizer WVR5200
The user manual for the Tektronix WVR5200 Waveform Rasterizer WVR5200 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Waveform Monitors & Scopes.
The WVR5200 Waveform Rasterizer from Tektronix is a basic video Waveform Rasterizer that is equally at home in production studio control rooms, mobile trucks, editing and color correction suites, field production and QC. The WVR5200 accepts and loops-through reference sync signals via discrete Reference In/Out connectors for easy integration into a video facility. The unit can display the reference signal as an aid in troubleshooting facility sync. The WVR5200 can also provide its own internal sync when used as a standalone unit.
The WVR5200 comes standard with four SDI inputs. Each input features auto-detection of HD/SD-SDI and multiple Dual Link video formats for signal analysis and display on a monitor via SDI output or a DVI-I connector for flexibility. The CRT-like trace quality of the WVR5200 provides an analog look and feel to the waveform display screen. For audio monitoring the unit is equipped with a 1/4" headphone jack on the front.
Designed to be flexible and portable, this unit is lightweight, small in size, and does not draw an excessive amount of power. At 8.4 x 5.5" the WVR5200 is about half the size of a sheet of paper and one rack unit in height. It draws a maximum of 35 watts at 12VDC, making it extremely portable with flexible powering options through its 4-pin XLR connector. The WVR5200 comes enabled with a variety of options to display the signal including Waveform display of external reference, Black Picture, Flexible Quad Tile Display and TandemVu. Also enabled are Tektronix's patented display technologies Diamond display, Arrowhead/Split Arrowhead display, Timing display, and Lighting display.
The WVR5200 comes with 32 user-configurable instrument presets which allow users to recall commonly used configurations. These configurations can be transferred to and from other WVR5200 units via a USB memory device, such as a flash drive, available separately. Screenshots and error logs can also be saved through the USB port. Feeding an LTC signal to the remote connector on the back of the unit allows for display of the LTC signal. The WVR5200 is controllable by SNMP over the Ethernet port on the back of the unit. In addition software upgrades for added features are available through both the USB and Ethernet ports.
|
If you own a Tektronix waveform monitors & scopes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Tektronix WVR5200 Waveform Rasterizer WVR5200 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Tektronix WVR5200 Waveform Rasterizer WVR5200:
| Input Type | 4 x BNC: Internally Terminated 75Ω
Auto-detection between 3G, Dual Link, HD and SD Signals
3G support optional | | Input Level | 800 mVp-p, ±10% | | Input Equalization | Maximum Cable Run Using Type 1694A Cable
270 Mb/s = 705' (215 m)
1.5 Gb/s = 656' (200 m)
3 Gb/s = 426' (130 m) | | Output | SDI Switched Output
Selected, Active Input or Test Signal | | Return Loss | Inputs and Outputs - Power On or Off
>15 dB from 1 MHz to 1.5 GHz
>10 dB from 1.5 GHz to 3 GHz | | Monitor/Headphone Out | 1/4" Phono | | Monitor Output | Signal Format
DVI-I Output XGA
1024 x 768, 60 Hz Vertical Rate | | Internal/External | Selectable | | Sync Formats | NTSC
Pal
Tri-Level Sync | | DC Input Impedance | 20kΩ, Nominal | | Return Loss | >40 dB to 6 MHz
>35 dB to 30 MHz | | Lock Range | ±50 ppm | | Serial Digital Waveform Vertical Characteristics | Vertical Measurement Accuracy
At 1 x Gain, ±0.5% of 700 mV Full Scale
At 5 x Gain, ±0.2% of 700 mV Full Scale
Gain
1x, 5x, Variable Range 0.25 x to >7.5x
Freqency Response
SD
Luminance (y) Channel ±0.5% to 5.75 MHz
Color Difference Channels (Pb, Pr) ±0.5% to 2.75 MHz
HD
Luminance (Y) Channel ±0.5% to 30 MHz
Difference Channels (Pb, Pr) ±0.5% to 15 MHz | | Horizontal Waveform Characteristics | Sweep Timing Accuracy
±0.1%
Sweep Linearity
±0.1% | | Optional Mounting Accessory Notes | Optional 1U Rack Mount Kits Available
VTSRACK-L1: Full-depth 1RU rack to fit a single WVR5200
VTSRACK-L2: Full-depth 1RU rack to fit one or two
WVR5200, WVR5000, SPG300 side by side
VTSRACK-S2: Short-depth 1RU rack to fit one or two WVR5200
side by side | | USB | 1x USB 2.0 Port on Front Panel
Supports Transfer of the below:
Presets
Screenshots
Error Logs | | Ethernet | 1x RJ-45 10/100/1000
Note: Supports Manual and DHCP Address Modes | | Remote | LTC
1x 15-pin D-SUB Female
LTC Input Signal
Longitudinal Time Code - per IEC Publication 461
LTC Signal Amplitude Range
0.2V[p-p] to 5.0V[p-p] balanced differential or single-ended
Ground Closure Input Signal
TTL Thresholds, 5V Max Input, -0.5 Min Input; Pull Low to Assert
Ground Closure Output Signal
One Open Collector Output | | Power Connector | 1x XLR 4-Pin Male | | Voltage Range | 12 to 15 VDC Nominal
10.75 to 18 VDC Min-Max Operating Voltage | | Power Consumption | 27 W
35 W Max | | Fuse Rating | 4A Internal Self-Resetting Fuse | | Protection Rating | ±30V DC Overvoltage and Reverse Voltage
Note: Unit Powers Down in Presence of High Transient Voltage. | | Power Supply (AC) | 100V to 240VAC ±10%, 50/60Hz | | Temperature & Humidity | Operating Conditions
Temperature: 32 to 104°F (0 to 40°C)
Humidity : 20% to 80%
Storage Conditions
Temperature: -4 to 140°F (-20 to 60°C)
Humidity : 55 to 90% | | Dimensions (H x W x D) | 1.7 x 8.4 x 5.5" (43 x 213 x 140 mm)
1U | | Weight | 1.8 lb (0.8 kg) | | Package Weight | 8.55 lb | | Box Dimensions (LxWxH) | 17.4 x 14.9 x 12.4" | |
The user manual for the Tektronix WVR5200 Waveform Rasterizer WVR5200 can be downloaded in .pdf
format if it did not come with your new waveform monitors & scopes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Tektronix users keep a unique electronic library
for Tektronix waveform monitors & scopess,
where you can use our link to download the user manual for the Tektronix WVR5200 Waveform Rasterizer WVR5200.
The user manual lists all of the functions of the Tektronix WVR5200 Waveform Rasterizer WVR5200,
all the basic and advanced features and tells you how to use the waveform monitors & scopes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Tektronix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Tektronix WVR5200 Waveform Rasterizer WVR5200. User manuals are also
available on the Tektronix website under Professional Video - Signal Processing & Distribution - Waveform Monitors & Scopes.
Question and answer discussion forum concerning user instructions and resolving problems with the Tektronix WVR5200 Waveform Rasterizer WVR5200 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Tektronix WVR5200 Waveform Rasterizer WVR5200
|
|
|
|
|
