User manual Tektronix WVR5250 Compact Video Waveform Rasterizer WVR5250

User manual for Tektronix WVR5250 Compact Video Waveform Rasterizer WVR5250

Manufacturer: Tektronix

Basic description and contents of package

Product classification: Professional Video - Signal Processing & Distribution - Waveform Monitors & Scopes

Safety instructions

Startup and operation of the waveform monitors & scopes

Tips for setting up your Tektronix

Settings and expert assistance

Contact Tektronix service

Troubleshooting

Warranty information

Video
Input Type	2 x BNC: Internally Terminated 75 Ω Auto-detection between 3G, Dual Link, HD, and SD Signals 3G support optional
Input Level	800 mVpp, ±10%
Input Equalization	Maximum Cable Run Using Type 1694A Cable 270 Mb/s: 705' (215 m) 1.5 Gb/s: 656' (200 m) 3 Gb/s: 426' (130 m)
Output	SDI switched output Selected, active input or test signal
Return Loss	Inputs and Outputs - Power On or Off > 15 dB from 1 MHz to 1.5 GHz > 10 dB from 1.5 to 3 GHz
Monitor Output	Signal Format (DVI-I Output): 1024 x 768, 60 Hz vertical rate Picture display will be disabled while monitoring the HDCP encrypted video signal through an HDMI input

External Reference
Sync Formats	NTSC, Pal, and tri-level sync
Input Type	Passive loop through BNC, 75 Ω compensated
DC Input Impedance	20 kΩ, nominal
Return Loss	> 40 dB to 6 MHz > 35 dB to 30 MHz
Lock Range	±50 ppm

HDMI Connectivity
Inputs	2 with auto format detection
Output	HDMI switched output with HDCP
Connector Type	Type A receptacle
HDCP	HDMI output is encrypted while receiving the HDCP encrypted content on a selected input. The picture display and the thumbnail display on the DVI output will be disabled while receiving the HDCP encrypted content on a selected input.

Waveform Characteristics
Serial Digital Waveform Vertical Characteristics	Vertical Measurement Accuracy: At 1 x gain, ±0.5% of 700 mV full scale, at 5 x gain, ±0.2% of 700 mV full scale Gain: 1x, 5x, variable range 0.25x to greater than 7.5x Freqency Response SD: - Luminance (y) channel ±0.5% to 5.75 MHz, color difference channels (Pb, Pr) ±0.5% to 2.75 MHz Freqency Response HD: Luminance (Y) channel ±0.5% to 30 MHz, difference channels (Pb, Pr) ±0.5% to 15 MHz
Horizontal Waveform Characteristics	Sweep Timing Accuracy: ±0.1% Sweep Linearity: ±0.1%

Audio Characteristics
Level Meter Resolution	0.056 dB steps at 30 dB scale from full scale to -20 dBFS 0.20 dB steps at 70 dB scale for signals above -20 dBFS
Meter Ballistics	True peak, PPM type 1, PPM type 2, BBC PPM, loudness
Defined / Programmable Level Detection	Mute, clip, user-programmable silence, over
Level Meter Accuracy	-0.5 dB (for analog), -0.2 dB (for digital) from 20 Hz to 20 kHz, 0 to -40 dBFS sine wave, peak ballistic mode

Operational Specifications
Power Connector	XLR 4-pin male connector (Pin 1 = V(-), Pin 4 = V(+), Pin 2, 3: NC)
Power Consumption	27 W 35 W maximum
Surge	10 A at 12 V
Fuse Rating	4 A, internal self-resetting fuse
Protection Rating	Transient, Over, and Reverse Voltage: ±30 VDC overvoltage and reverse Voltage Unit powers down in presence of high transient voltage
Power Supply	Input: 12 VDC Power Adapter: 100 to 240 VAC ±10%, 50/60 Hz
Dimensions (H x W x D)	1.7 x 8.4 x 5.5" (43.0 x 213.0 x 140.0 mm)
Weight	1.8 lb (0.8 kg)

PDF-MANUALS.com \| User manual here!
	User manual Tektronix WVR5250 Compact Video Waveform Rasterizer WVR5250 Operating instructions and pdf manual for use - Tektronix WVR5250 Compact Video Waveform Rasterizer WVR5250 User manual, User manual Tektronix WVR5250 Compact Video Waveform Rasterizer WVR5250, Tektronix, WVR5250, Compact, Video, Waveform, Rasteriz

User manual for Tektronix WVR5250 Compact Video Waveform Rasterizer WVR5250