User manual for Toa Electronics EM-600 Flush-Mount Microphone EM-600
- Manufacturer: Toa Electronics
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Boundary
- Safety instructions
- Startup and operation of the boundary
- Tips for setting up your Toa Electronics
- Settings and expert assistance
- Contact Toa Electronics service
- Troubleshooting
- Warranty information
- Price: 204 USD
|
We recommend checking out our discussion threads on the Toa Electronics EM-600 Flush-Mount Microphone EM-600,
which address similar problems with connecting and setting up Boundary Toa Electronics.
|
User manual for the Toa Electronics EM-600 Flush-Mount Microphone EM-600
The user manual for the Toa Electronics EM-600 Flush-Mount Microphone EM-600 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Boundary.
The EM-600 Flush-Mount Microphone from Toa Electronics is an omni directional electret condenser microphone designed to be mounted in ceilings, walls, tables, and other surfaces for conferencing and security monitoring systems. The microphone can be powered by between 9 and 52 volts of phantom power. The omni directional pickup pattern and flush-mount design is optimized for placement on a desk or in the ceiling. The microphone body is threaded and comes with a tightening nut for the installation as well as two rubber isolation rings intended to reduce the transfer of structural vibrations.
|
If you own a Toa Electronics boundary and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Toa Electronics EM-600 Flush-Mount Microphone EM-600 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Toa Electronics EM-600 Flush-Mount Microphone EM-600:
| Transducer | Electret Condenser | | Polar Pattern | Omnidirectional | | Frequency Range | 30 Hz to 20 kHz | | Impedance | 120 ohms | | Sensitivity | -36 dB | | Power Requirements | 9-52 V | | Output Connectors | 3-pin XLR | | Operating Temperature | 32 to 104°F (.00 to 40.00°C) | | Length | 2.68" (68.07 mm) | | Diameter | 1.1" (27.94 mm) | | Weight | 0.19 lb (86 g) | | Package Weight | 0.3 lb | | Box Dimensions (LxWxH) | 6.0 x 2.2 x 1.9" | |
The user manual for the Toa Electronics EM-600 Flush-Mount Microphone EM-600 can be downloaded in .pdf
format if it did not come with your new boundary, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Toa Electronics users keep a unique electronic library
for Toa Electronics boundarys,
where you can use our link to download the user manual for the Toa Electronics EM-600 Flush-Mount Microphone EM-600.
The user manual lists all of the functions of the Toa Electronics EM-600 Flush-Mount Microphone EM-600,
all the basic and advanced features and tells you how to use the boundary.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Toa Electronics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Toa Electronics EM-600 Flush-Mount Microphone EM-600. User manuals are also
available on the Toa Electronics website under Pro Audio - Installation Sound - Boundary.
Question and answer discussion forum concerning user instructions and resolving problems with the Toa Electronics EM-600 Flush-Mount Microphone EM-600 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Toa Electronics EM-600 Flush-Mount Microphone EM-600
|
|
