|
User manual for Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1
- Manufacturer: Vinten
- Basic description and contents of package
- Product classification: Professional Video - Tripods, Supports & Rigs - Pedestals & Accessories - Pedestals
- Safety instructions
- Startup and operation of the pedestals
- Tips for setting up your Vinten
- Settings and expert assistance
- Contact Vinten service
- Troubleshooting
- Warranty information
- Price: 81 USD
|
We recommend checking out our discussion threads on the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1,
which address similar problems with connecting and setting up Pedestals Vinten.
|
User manual for the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1
The user manual for the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1 provides
necessary instructions for the proper use of the product Professional Video - Tripods, Supports & Rigs - Pedestals & Accessories - Pedestals.
The Quattro SE, VRI Box & Vector 950i Pan and Tilt Head System from Vinten is a pedestal system which includes a Quattro SE Encoded Manual Pedestal, a Virtual Reality Interface (VRI) Box, and a Vector 950i Pan and Tilt Head, as well as a Telescopic Pan Bar, a Pan Bar Mounted PDA user interface, a camera wedge plate, and a VRI Box mounting kit.
The Quattro SE pedestal is a compact, manually operated pedestal with built-in encoders. It offers a combination of simplified homing and setup procedures, precise digital electronic positioning, and on-shot performance for use in virtual studios. The pedestal features an ergonomically assisted lifting column and a small doorway width.
To enable tracking, high-quality precision encoders have been integrated into the wheels and column of the Quattro SS. The pedestal also incorporates an electronic module and base processor which deliver accurate position data for all axes. This combination with the head information provides precise real-time digital electronic positioning over the floor and in elevation. A PDA is included to simplify the setup procedure and provide the configuration and the operator's user interface. This is delivered through various calibration routines, head setup, and optical axis offset input, whilst also providing the operator with enhanced functionality such as quick homing and virtual set trimming. The homing procedure has been further simplified to provide ease of operation, flexibility of direction & angle of approach, and a fast targeting option.
A cable management system is incorporated into the pedestal to prevent the cable being caught or tangled during repositioning. To simplify virtual tracking, the output from the pedestal is integrated with the Vector 950i head, and lens position is fed back into a single data channel to the rendering system of a virtual software image generator.
The Vector 950i is an encoded manual pan and tilt head. It offers real-time digital electronic positioning with a load bearing capacity of 35 to 264 lb. The rotary optical incremental encoders can be accessed via a connector provided at the front panel. Along with a tilt range of ±90° for 132 lb & ±60° for 264 lb, the Vector 950i Encoded Manual Head offers a tilt and pan resolution of 1,800,000° (per 360°). It supports TF drag that adjusts the drag level and whip pan movement without any manual reduction of drag. This head is ideal for virtual production with full facility studio and OB cameras.
The VRI Box processes the positional data from the head encoders. It offers direct interfacing to lenses with encoder outputs (or bolt on lens encoders), to enable single data streaming to a graphics rendering system. The VRI box comes with a head interface cable, GUI, and mounting brackets. Mounted on the Quattro SE it provides full six-axis tracking. The Quattro software enables re-configuring to give X, Y, and Z axis VR movement.
|
If you own a Vinten pedestals and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1:
| Maximum Load Capacity | 187 lb (85 kg) | | On-Shot Stroke | 39.4" (100 cm) | | Transit Doorway Width | With Small Steering Ring: 29.3" (74.5 cm)
With Large Steering Ring: 32.3" (82.0 cm) | | Clearance | Ground Clearance: 0.8" (2.0 cm) | | Cable Guards | Single point action | | Repeatability | X & Y +/- 70 mm +/- 1° (triangle move) | | Degrees of Freedom | Pedestal Only: 4 (X, Y, Z, and base orientation)
Included in Serial Protocol Output: 4 (P, T, Z, and F) | | Resolution | X, Y, Z: ± < 1 mm
Orientation: ± 0.02° | | Maximum Height | 58.9" (149.8 cm) | | Minimum Height | 19.6" (49.8 cm) | | Weight | 300.6 lb (136.4 kg), without trim weights | | Interface | Direct interface for lenses | | Fixing Center | Standard Vinten accessory mount bars, 25, 50, 75 or 100 mm centers | | Connectors | 1 x Genlock, input
2 x Genlock, output
1 x Devicelink.i
1 x Lens encoders (quadrature)
1 x Quatrature heads input
1 x GUI input
1 x Jib input (quadrature input for elevation and azimuth on selected jibs)
2 x Ethernet
1 x USB | | Power | Power In: 110-250 VAC or 9-28 VDC, power consumption 80 W
Power Out: 12 VDC @ 1 A / 24 VDC @ 1 A | | Payload | 35 - 264 lb (16 - 120 kg) | | Tilt Range | @ 132 lb (60 kg): ±90°
@ 264 lb (120 kg): ±60° | | Pan Resolution | 1,800,000° per 360° | | Tilt Resolution | 1,800,000° per 360° | | Power Requirements | 5 VDC ±10% | | Dimensions | 9.7 x 8.8 x 13.5" (24.8 x 22.5 x 34.2 cm) | | Weight | 36.8 lb (16.7 kg) | |
The user manual for the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1 can be downloaded in .pdf
format if it did not come with your new pedestals, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Vinten users keep a unique electronic library
for Vinten pedestalss,
where you can use our link to download the user manual for the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1.
The user manual lists all of the functions of the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1,
all the basic and advanced features and tells you how to use the pedestals.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Vinten service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1. User manuals are also
available on the Vinten website under Professional Video - Tripods, Supports & Rigs - Pedestals & Accessories - Pedestals.
Question and answer discussion forum concerning user instructions and resolving problems with the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Vinten Quattro SE, VRI Box & Vector QUATTRO SE 950I SYS 1
|
|
|
|
|
