User manual VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696
Operating instructions and pdf manual for use - VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696 User manual, User manual VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696, VITEC, MGW, Nano, TOUGH, H.264, HD/SD, Encoder, 14696, Video
User manual for VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696
Manufacturer: VITEC
Basic description and contents of package
Product classification: Professional Video - Signal Processing & Distribution - Analog & Digital Converters
Safety instructions
Startup and operation of the analog & digital converters
Tips for setting up your VITEC
Settings and expert assistance
Contact VITEC service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696,
which address similar problems with connecting and setting up Analog & Digital Converters VITEC.
User manual for the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696
The user manual for the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
The Vitec MGW Nano TOUGH H.264 HD/SD Encoder is a rugged, MIL-STD-certified unit offering low latency video streaming for ISR and Situational Awareness video. It supports critical metadata processing and hardware-based motion stabilization. With less than 2lb weight, solid-state design with no moving parts, 100% silent operation, and its low power mode requiring only 10W for Full HD 1080p compression and streaming, the Nano TOUGH encoder is suitable for airborne applications or portable missions in extreme conditions.
If you own a VITEC analog & digital converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696:
Specifications
Video Inputs
1 x HD-SDI/SD-SDI (SMPTE 259M-C, SMPTE 292M, SMPTE 274M, SMPTE 296M, SMPTE 424M, SMPTE 425M) 1 x HDMI (support for HDCP and non-HDCP protected sources), MIL-DTL-38999 Circular connector 1 x Analog Composite RS-170 (BNC, 75 Ω optional)
Input Resolutions
1920 x 1080p @ 60, 59.94, 50, 30, 29.97, 25, 24 Hz 1920 x 1080i @ 60, 59.94, 50 Hz 1600 x 1200p @ 85, 60, 50 Hz 1366 x 768p @ 60, 50 Hz 1280 x 800p @ 60, 50 Hz 1280 x 768p @ 60, 50 Hz 1024 x 768p @ 60, 50 Hz 1280 x 720p @ 60, 59.94, 50, 30, 29.97, 25 Hz 720 x 480p @ 30, 29.97 Hz 720 x 480i @ 59.94 Hz 720 x 576p @ 25 Hz 720 x 576i @ 50 Hz
Audio Inputs
1 x SDI Embedded audio (stereo and mono) 1 x HDMI Embedded audio (stereo and mono)
Video Output
H.264 (ISOIEC 14496-10 AVC MPEG-4 part 10). Modes: Baseline Profile L3, Main Profile L3 and L4, High Profile L4 and L4.1 Bit Rate: 100 Kb/s to 14 Mb/s Frame Rate: 5 to 60 fps. Down sampling modes: third, half, three quarters Bit Rate Regulation Modes: Constant (CBR), Variable (VBR) Output Resolutions: Configurable from QCIF up to 1920 x 1080p30 / 1280 x 720p60 Encoding Latency: 65 ms (TurboVideo mode)
Audio Output
MPEG-4 AAC-LC (ISO/IEC 14496-3), MPEG-1 L2 Stereo and mono modes Bit Rate: 32 kb/s to 256 kb/s in Stereo, 16 kb/s to 128 Kb/s in Mono Sampling Rate: 16 kHz to 48 kHz
Network Protocols
Streaming: UDP, RTSP, SAP, MPEG-2 Transport encapsulation, unicast and multicast modes Peripheral: HTTPS, DHCP, NTP, SSH, SAP
Management
Secure Web based remote management interface (HTTPS) Dashboard with dynamically updating I/O signal detection and streaming stats Autostart mode recovers saved configuration after power cycle Remote firmware and software upgrade capability via command line / web-GUI System and channel event logging SSH interface with "get/set" or XML API for integration with 3rd party control software
Security
Real-time AES encryption for video, audio and metadata. Interoperability with EZ TV and FITIS systems Password protected HTTP and CLI control interfaces
Metadata
CoT over serial RS-232, KLV over IP, KLV over SDI (VANC per SMPTE 336M) UAS Datalink Local Metadata Set (MISB STD 0601.5, STD 0902) Time Stamping and Transport of Compressed Motion Imagery and Metadata (MISB STD 0604.2) Cursor on Target (CoT) Conversions to Key- Length-Value (KLV) Metadata (MISB EG 0805) Security Metadata Universal and Local Sets for Digital Motion Imagery (MISB STD 0102.8) STANAG 4609 output stream over UDP/IP
Operating Temperature
-40 to +158ºF (-40 to +70ºC)
Relative Humidity
5 to 95% (non-condensing)
Standards & Certifications
FCC part 15 class B and CE MIL-STD810F & MIL-STD461F certified
MTBF
Ground to 9 years Airborne to 12.7 years (as per MIL-HDBK-217F)
Enclosure
Military-grade rugged aluminum
Power
24 to 48 VDC MIL-STD704
Dimensions (H x W x D)
1.46 x 5.59 x 5.51" (37.20 x 142.00 x 140.00 mm )
Weight
1.85 lb (0.84 kg)
The user manual for the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696 can be downloaded in .pdf
format if it did not come with your new analog & digital converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other VITEC users keep a unique electronic library
for VITEC analog & digital converterss,
where you can use our link to download the user manual for the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696.
The user manual lists all of the functions of the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696,
all the basic and advanced features and tells you how to use the analog & digital converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from VITEC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696. User manuals are also
available on the VITEC website under Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the VITEC MGW Nano TOUGH H.264 HD/SD Encoder 14696 - no comments have been made yet - be the first to add a comment