|
User manual for Yamaha A-S501 Integrated Amplifier (Black) A-S501BL
- Manufacturer: Yamaha
- Basic description and contents of package
- Product classification: TVs & Entertainment - Receivers & Amplifiers - Amplifiers
- Safety instructions
- Startup and operation of the amplifiers
- Tips for setting up your Yamaha
- Settings and expert assistance
- Contact Yamaha service
- Troubleshooting
- Warranty information
- Price: 550 USD
Click to enlarge image
|
We recommend checking out our discussion threads on the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL,
which address similar problems with connecting and setting up Amplifiers Yamaha.
|
User manual for the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL
The user manual for the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL provides
necessary instructions for the proper use of the product TVs & Entertainment - Receivers & Amplifiers - Amplifiers.
Expand your listening horizons with the black A-S501 Integrated Amplifier from Yamaha. Featuring up to 100W per channel of RMS power at 6 ohms, this amp is equipped with digital inputs for connecting devices like televisions and Blu-ray/DVD players. It offers dual stereo outputs, giving you the ability to power two sets of speakers in different rooms and switch between them, or have them both playing at the same time. To increase the bass output of your sound system, there's also a terminal for connecting a subwoofer. To reduce distortion and degradation and produce the cleanest possible sound, the A-S501 employs Pure Direct Mode. Activated via a button on the front of the unit, this mode causes input signals to bypass unused circuits and cuts off those circuits' power supply. To further ensure quality sound, the amplifier's continuously variable loudness control allows you to balance low and high frequency sounds so you can hear a full tonal range at any volume. This Yamaha amplifier was built with energy efficiency in mind, and uses a power management system to switch itself to idle mode when not in use. The A-S501's internal circuitry mirrors itself symmetrically to produce higher signal purity and lower degradation. The chassis is reinforced with a solid center bar to reduce vibration and features a brushed aluminum front panel and knobs. The system comes with a remote control for easy operation.
|
If you own a Yamaha amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL:
RMS Output Power | 6 Ohms, 20 Hz to 20 kHz, 0.038% THD: 100 W + 100 W 8 Ohms, 20 Hz to 20 kHz, 0.019% THD: 85 W + 85 W | Dynamic Power per Channel | 8 Ohms: 130 W 6 Ohms: 150 W 4 Ohms: 185 W 2 Ohms: 220 W | Power Bandwidth | 0.04% THD, 42.5 W, 8 Ohms: 10 Hz to 50 kHz | Damping Factor | 1 kHz, 8 Ohms: ≥240 | Input Sensitivity/Impedance | Phono (MM): 3.0 mV / 47 kOhms CD, etc.: 200 mV / 47 kOhms | Maximum Input Voltage | Phono (MM) (1 kHz, 0.03% THD): ≥45 mV CD, etc. (1 kHz, 0.5% THD): ≥2.2 V | Output Level and Impedance | Rec Out: ≤200 mV / 1.0 kOhms Subwoofer Out (Cut-Off Frequency: 100 Hz): 3.5 V / 1.2 kOhms | Headphone Output Impedance | CD, etc. (Input 1 kHz, 200 mV, 8 Ohms): 430 mV / 470 ohms | Frequency Response | With Pure Direct: 20 Hz to 20 kHz, 0±0.5 dB Without Pure Direct: 10 Hz to 100 kHz, 0±1.0 dB | RIAA Equalization Deviation | ±0.5 dB | Total Harmonic Distortion (THD) | Phono (MM) to Rec Out (20 Hz to 20 kHz, 2.5 V) ≤0.03% CD, etc. to Speakers (20 Hz to 20 kHz, 45 W, 8 Ohms): ≤0.019% | Signal-to-Noise Ratio | Phono (MM) (5 mV Input Shorted): ≥82 dB CD, etc., with Pure Direct On (200 mV Input Shorted): ≥99 dB | Residual Noise | 40 μV (IHF-A Network) | Channel Separation | CD, etc. (5.1 kOhms Input Shorted, 1 kHz): 65 dB or more CD, etc. (5.1 kOhms Input Shorted, 10 kHz): 50 dB or more | Tone Control | Bass Boost/Cut (20 Hz): ± 10 dB Turnover Frequency: 400 Hz Treble Boost/Cut (20 kHz): ± 10 dB Turnover Frequency: 3.5 kHz | Loudness Control | Attenuation (1 kHz, Continuous): -30 dB | Digital Audio Format | PCM (2-channel), 192/176.4/96/88.2/48/44.1/32 kHz | PCM Word Depth | 24-bit / 16-bit | Input | 5 x RCA 1 x Phono for turntable 1 x Optical 1 x Coaxial | Output | 2 x RCA 4 x Speaker terminal 1 x Subwoofer 1 x Headphone 1 x DC (accessory power) | Terminals | Gold-plated RCA (CD, phono, coaxial) and speaker terminals | Cabinet (Chassis) | Design: Reinforced with solid center bar Finish: Brushed aluminum | Power Supply | 120 VAC, 60 Hz | Power Consumption | In Use: 240 W Maximum: 510 W Standby: 0.5 W | Capacitors | 12,000 μF block capacitors | Dimensions (W x H x D) | 17.1 x 5.9 x 15.2" (43.5 x 15.1 x 38.7 cm) | Weight | 22.7 lb (10.3 kg) | Package Weight | 26.0 lb | Box Dimensions (LxWxH) | 21.0 x 8.5 x 7.5" | |
The user manual for the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL can be downloaded in .pdf
format if it did not come with your new amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Yamaha users keep a unique electronic library
for Yamaha amplifierss,
where you can use our link to download the user manual for the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL.
The user manual lists all of the functions of the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL,
all the basic and advanced features and tells you how to use the amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Yamaha service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL. User manuals are also
available on the Yamaha website under TVs & Entertainment - Receivers & Amplifiers - Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Yamaha A-S501 Integrated Amplifier (Black) A-S501BL
|
|
|
|
|