|
User manual for AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010
- Manufacturer: AKG
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Boundary
- Safety instructions
- Startup and operation of the boundary
- Tips for setting up your AKG
- Settings and expert assistance
- Contact AKG service
- Troubleshooting
- Warranty information
- Price: 370 USD
|
We recommend checking out our discussion threads on the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010,
which address similar problems with connecting and setting up Boundary AKG.
|
User manual for the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010
The user manual for the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Boundary.
The PCC-170SWO from AKG is a surface-mounted supercardioid boundary layer microphone of professional quality suitable for boardrooms, churches, courtrooms, and council chambers. Because of its highly directional pickup pattern, the PCC-170SWO minimizes background noise and feedback.
The PCC-170SWO has a silent-operating membrane switch which is normally off. The switch can be configured for touch on/off, momentary on or momentary off operation. This configuration is set by a bottom-mounted DIP switch. A high intensity LED lights when the unit is on. The PCC-170SWO is intended for multiple microphone use on a conference table where each person wants control of his or her microphone.
A pair of extra leads in the microphone cable allows isolated remote sensing of the microphone switch closure. In a typical distance-learning application, a video camera would track to the person who switched on the microphone. The microphone can be set to be always on. In this mode, the switch only activates the remote sensing and LED. This is useful when using an external gated mixer (automatic mixer). Remote sensing is done by a patented opto-coupled MOS switching circuit. At the remote-sensing leads, the resistance goes low when the mic is on.
Since the microphone capsule is placed on a boundary or surface, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The microphone capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced.
Self-contained electronics eliminate the need for an in-line preamp. Powered by 12 - 48V phantom power, the PCC-170SWO has a low-impedance balanced output which permits long cable runs without hum pickup or high-frequency loss. Self-noise is low and sensitivity is very high and an RFI suppression is included. A bass-tilt switch allows the user to tailor the low-end response for particular applications.
|
If you own a AKG boundary and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010:
| Polar Pattern | Supercardioid | | Frequency Range | 50 Hz to 20 kHz | | Signal to Noise Ratio | 72 dB A-Weighted | | Equivalent Noise Level | 22 dB A-Weighted | | Sensitivity | 22 mV/PA | | Power Requirements | 12 V, 24 V, 48 V | | Output Connectors | 3-Pin XLR | |
The user manual for the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010 can be downloaded in .pdf
format if it did not come with your new boundary, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other AKG users keep a unique electronic library
for AKG boundarys,
where you can use our link to download the user manual for the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010.
The user manual lists all of the functions of the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010,
all the basic and advanced features and tells you how to use the boundary.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from AKG service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010. User manuals are also
available on the AKG website under Pro Audio - Installation Sound - Boundary.
Question and answer discussion forum concerning user instructions and resolving problems with the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the AKG PCC-170SWO Supercardioid Boundary Layer 3329H00010
|
|
|
|
|
