|
User manual for Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10
- Manufacturer: Allen & Heath
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Analog Recording Mixers
- Safety instructions
- Startup and operation of the analog recording mixers
- Tips for setting up your Allen & Heath
- Settings and expert assistance
- Contact Allen & Heath service
- Troubleshooting
- Warranty information
- Price: 799 USD
|
We recommend checking out our discussion threads on the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10,
which address similar problems with connecting and setting up Analog Recording Mixers Allen & Heath.
|
User manual for the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10
The user manual for the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Analog Recording Mixers.
The compact XB-10 Radio Broadcast Mixer from Allen & Heath is well-suited for small radio or internet broadcast studios, college, and university radio stations, podcasting, content creation, and more.
Despite its tiny footprint, the XB-10 is packed with many specialized broadcast features. Radio-friendly tools include a telephone communication (telco) channel, mic channel ON switch sensing, stereo channel start/cue outputs for CD deck transport control, and automatic muting of speaker outputs. A separate monitor mix can be created for operator and guest or presenter, and the operator can speak off-air to the studio or telephone callers using the Talk feature.
This radio broadcast mixer’s preamps use low-noise discrete transistor circuitry to achieve high gain and good linearity. Each mic channel is equipped the CompACT compressor to keep the dynamic range of a presenter microphone under control. CompACT (Adaptive Compression Technology) is a program-dependent audio leveler. It combines both downward and upward compression with peak limiting. Low-level signals are given a gain boost, mid-level signals are mildly compressed with a soft knee response, and high-level signals are limited.
A variable limiter on the main output ensures that the level does not exceed a pre-defined level so the final mix to air does not saturate expensive broadcast equipment. Back panel option switches allow the limiter to be bypassed. A trim pot is used to vary the threshold and an LED on the front panel indicates when the limiter has triggered.
The plug-n-play USB connection can be used for VoIP telephone calls, recording program material, playing jingles, and more.
|
If you own a Allen & Heath analog recording mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10:
| Input | Mono Channel Mic Input (XLR): -10 to -60dBu nominal (+11dBu in max)
Mono Channel Line Input (TRS Jack Socket): 10 to -40 dBu (30 dBu maximum)
Stereo Input (TRS Jack Sockets): 0 dBu nominal (Gain = Off to 15 dB)
Stereo Input (RCA Phono Sockets): 0 dBu nominal (Gain = Off to 15 dB)
Telco channel input (TRS) +10 to -26 dBu (+30 dBu maximum)
External monitor input (RCA phono sockets) 0 dBu Nominal | | Output | PGM L&R Outputs (XLR): 4 dBu nominal, 25 dBu maximum
PGM L&R Inserts (TRS Jack Sockets): -2 dBu nominal, 21 dBu maximum
Aux Output (RCA Phono Socket): 0 dBu nominal, 21 dBu maximum
Alt Output (RCA Phono Socket): 0 dBu nominal, 21 dBu maximum
Rec Outputs (RCA Phono Sockets) 0 dBu nominal, 21 dBu maximum
Telco cleanfeed output (TRS Jack socket) 0 dBu nominal, +21 dBu maximum
CRM Speaker outputs (RCA phono sockets) 0 dBu nominal, +21 dBu maximum | | USB | Audio CODEC (Coder/Decoder)
USB Audio In/Out: USB 1.1 compliant 16-bit
Sample Rate: 32, 44.1, or 48 kHz | | THD + N | Mic in to PGM L/R Out, 15 dB gain, 1 kHz, 10 dBu out: 0.002%
Mic in to PGM L/R Out, 30 dB gain, 1 kHz, 0 dBu out 0.006%
Line in to PGM L/R out, 0 dB gain, 1 kHz, 0 dBu out 0.005%
Stereo in to PGM out, 0 dB gain, 1 kHz, +10 dBu out 0.002%
Telco in to PGM L/R out, 0 dB gain, 1 kHz, 0 dBu out 0.004% | | Noise | Mic Pre EIN @ maximum gain 150R input Z 22 to 22 kHz: -126 dBu
PGM out, PGM fader @ nominal 22 to 22 kHz: -103 dBu
Aux out, Alt out, Rec out @ nominal 22 to 22 kHz: <-93 dBu | | Headroom | Analog Headroom from Nominal Outputs: 21 dB
Analog Headroom from Nominal Mix Point: 24 dB
USB in & out Headroom from nominal: 14 dB | | Frequency Response | Mic in PGM L/R Out, 30 dB gain: 0.5/-1 dB 10 Hz to 30 kHz
Line in to PGM L/R out 0 dB gain: 0.5/-1 dB 10 Hz to 20 kHz
Stereo in to PGM L/R out: 0.5/-1 dB 10 Hz to 30 kHz | | Cross Talk | Attenuation (dB 22-22 kHz)
Mono fader attenuation (dB relative to +10 dBu) 1 kHz/10 kHz: -88/-88
Mono ON switch attenuation (dB relative to +10dBu) 1kHz/10kHz: -98/-98
TELCO fader attenuation (dB relative to +10 dBu) 1 kHz/10 kHz: -90/-90
TELCO ON switch attenuation (dB relative to +10 dBu) 1 kHz/10 kHz: -98/-98
Stereo fader attenuation (dB relative to +10 dBu) 1 kHz/10 kHz: -86/-86
Stereo ON switch attenuation (dB relative to +10 dBu) 1 kHz/10 kHz: -99/-96
PGM fader attenuation (dB relative to +10dBu) 1 kHz/10 kHz: -87/-87
TELCO clean-feed isolation from I/P (dB relative to +10 dBu) 1 kHz/10 kHz: -94/-77
Stereo separation, L in to PGM R out. dB relative to 1 kHz/10 kHz: -75/-74 | | Package Weight | 11.25 lb | | Box Dimensions (LxWxH) | 15.7 x 12.8 x 7.1" | |
The user manual for the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10 can be downloaded in .pdf
format if it did not come with your new analog recording mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Allen & Heath users keep a unique electronic library
for Allen & Heath analog recording mixerss,
where you can use our link to download the user manual for the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10.
The user manual lists all of the functions of the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10,
all the basic and advanced features and tells you how to use the analog recording mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Allen & Heath service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10. User manuals are also
available on the Allen & Heath website under Pro Audio - Recording - Analog Recording Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Allen & Heath XB-10 Radio Broadcast Mixer AH-ZED-XB-10
|
|
|
|
|
