|
User manual for Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX
- Manufacturer: Alto
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Portable PA Systems
- Safety instructions
- Startup and operation of the portable pa systems
- Tips for setting up your Alto
- Settings and expert assistance
- Contact Alto service
- Troubleshooting
- Warranty information
- Price: 470 USD
|
We recommend checking out our discussion threads on the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX,
which address similar problems with connecting and setting up Portable PA Systems Alto.
|
User manual for the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX
The user manual for the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Portable PA Systems.
The Alto EMPIRE TMX80DFX 8-Channel Powered Mixer with Effects is loaded with a total of 14 inputs comprised of 4 XLR jacks with phantom power, 8 line jacks and stereo RCA. These low-noise channels are beneficial when connecting instruments, mics, or even your iPod for playing between sets. Each mono and stereo channel has its own 3-shelf EQ, so you can dial in every nuance you need in seconds and in addition, there is a full 9-band stereo EQ. A/D and D/A conversion is performed with 24-bit precision, and easy-to-view knobs with smooth movement help to make mixing feel like playing a fine instrument.
|
If you own a Alto portable pa systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX:
Input Channels | Mono channels: Channels 1 to 4 Microphone Input: Electronically Balanced, discrete input configuration Frequency Response: 20 Hz to 22 kHz, +/-1 dB Distortion (THD&N): <=0.005% @ +4 dBu, 1 kHz Gain range: 0 to 50 dB (Mic) | Maximum Voltage Gain | 70 dB Channel Mic input → Main Mix Out & Tape Out 80 dB Channel Mic input → Control Room & Phones 60 dB Channel Mic input → Aux Send SNR (Signal to Noise Ratio): >=110 dBu Phantom power (Mic Pin2/Pin3 & Pin1): +45 ~ +49 V with switch control | Line Input | Electronically Balanced (SW to Line) Frequency Response: 20 Hz to 22 kHz, +/-1 dB Distortion (THD&N): <=0.005% at +4 dBu, 1 kHz Gain range: 15 to 35 dBu Stereo Channels: Channel 5 to 8 Line Input: Electronically Balanced (SW to Line) SNR: >=110 dBu Frequency Response: 20 Hz to 22 kHz, +/-1 dB Distortion: (THD&N) <=0.005% @ + 4dBu, 1 kHz Gain range: -20 to +20 dBu 60 dB Channel Line → Min Mix out | Maximum Voltage Gain | 20 dB FX Return → Main Mix Out 20 dB RCA Tape Input → Main Mix Out | Microphone Impedance | Impedance Microphone Input: 3.9 kΩ All Other Input: 10 kΩ or greater Tape Out: 1 kΩ All Other Outputs: 120 Ω | Equalization | Mono channels High: ±15 dB @ 12 kHz Mid: ±15 dB @ 2.5 kHz Low: ±15 dB @ 80 Hz
Stereo channels High ±15 dB @ 12 kHz Mid ±15 dB @ 2.5 kHz Low ±15 dB @ 80 Hz
Stereo Graphic EQ ±12 dB @ 16 kHz ±12 dB @ 8 kHz ±12 dB @ 4 kHz ±12 dB @ 2 kHz ±12 dB @ 1 kHz ±12 dB @ 500 Hz ±12 dB @ 250 Hz ±12 dB @ 125 Hz ±12 dB @ 63 Hz | DSP Section | A/D and D/A Converters: 24-bit DSP Resolution: 24-bit Type of Effects: Echo, Echo + Verb, Tremolo, Plate, Chorus, Vocal, Rotary, Small Room, Flange Verb, Large Hall Presets: 100 Controls: 100-position preset selector, Clip LED, Mute Switch, Footswitch with LED indicator Crosstalk Adjacent Input: <= -80 dB @ 1 kHz (Channel 1 to 6) Input to Output: <=-75 dB @ 1 kHz (Stereo L/R, Channels 1-4, Pan: panned hard left or right) Main Mix Section: Tape, Aux, Phones output level 0 dBu Unbalanced, 1/4" jacks Max out: +22 dBu Unbalanced, 1/4" jacks Main EQ (Option): +/-12 dB @ 9 bands (63, 125, 250, 500, 1k, 2k, 4k, 8k, 16 kHz) | Noise | Bus Noise: <=-90 dB @ 20 Hz to 22 kHz (channel & Main level at 0 dB, other at minimum, DSP mute) | Electrical | Frequency Response: 20 Hz to 20 kHz Output level: 0 dB S/N Ratio: >90 dB Distortion: <0.05% @ 1 kHz | Power Specifications | SPK Out Distortion: <0.1% @ 1 W & 1 kHz Distortion: <0.15% @ 100 W & 1 kHz Frequency Response: 20 Hz to 22 kHz, +/-2 dBu @ 100 W SNR (Line In): >=100 dBu | Continuous Power | 1 kHz, THD 1%, 2 x 350 W @ 4 Ω or 2 x 180 W @ 8 Ω Power EIAJ 1 kHz, THD 1%, 2 x 400 W @ 4 Ω or 2 X 200 W @ 8 Ω | Thermal Protection | Over-temperature power limiting thermal shutdown Temperature controlled 12 VDC fan output Short-circuit protection Overload output protection Over voltage protection DC offset shutdown | Power Consumption | Static Power No Output power state at 230 V: <= 32 W, 100 VAC, 50/60 Hz Power supply: Main voltage 110-120 VAC, 60 Hz 220 to 240 VAC, 50 Hz 100 V: T12 A, 250 V 110 to 120 V: T12 A, 250 V 220 to 240 V: T6.3 A, 250 V | Dimensions (W x L x H) | 12.0 x 10.1 x 2.9" (304.5 x 256.0 x 74.5 mm) | Weight | 11.0 lb (4.8 kg) | |
The user manual for the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX can be downloaded in .pdf
format if it did not come with your new portable pa systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Alto users keep a unique electronic library
for Alto portable pa systemss,
where you can use our link to download the user manual for the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX.
The user manual lists all of the functions of the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX,
all the basic and advanced features and tells you how to use the portable pa systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Alto service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX. User manuals are also
available on the Alto website under Pro Audio - Live Sound - Portable PA Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX
Post new comment to Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX
Subject: mike phantom power | Date: 21.12.2017 17:40:50 | Author: Terence Parkhouse | can I use a mixture of phantom powered mikes and non-phantom mikes together with the phantom power switched on? In other words, could it damage 'normal' XLR mikes with the phantom power switched on? | Reply |
Post new comment/question/response regarding the Alto EMPIRE TMX80DFX 8-Channel Powered Mixer EMPIRE TMX80 DFX
|
|
|
|
|