|
User manual for Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P
- Manufacturer: Aquabotix
- Basic description and contents of package
- Product classification: Photography - Underwater Photography - ROVs
- Safety instructions
- Startup and operation of the rovs
- Tips for setting up your Aquabotix
- Settings and expert assistance
- Contact Aquabotix service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P,
which address similar problems with connecting and setting up ROVs Aquabotix.
|
User manual for the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P
The user manual for the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P provides
necessary instructions for the proper use of the product Photography - Underwater Photography - ROVs.
The lime green AquaLens Pro from Aquabotix is a compact, portable, easy-to-use underwater viewing system with a color camera, live video feed, LED lights, and a 25' Kevlar-reinforced cable connecting it to the supplied, waterproof topside box/3.5" LCD monitor combination package. In a very short time, the spherical device, made of an ABS plastic body and an acrylic dome lens port, is ready for submersion to a maximum depth of 300'--and it does not require anyone to enter the water. Optional cable extensions are available for an increased operational range.
Simply use virtually any boat hook or another guide pole with the supplied adapter for pole attachment to position the device from a dry topside location. Then, watch the streaming video on the monitor.
Perform inspections of the underwater parts of your boat, including the anchor, rudder, hull, bottom and propellers. You can also use the AquaLens to check water conditions and execute searches, or to enjoy a closer look at undersea life and environments--all while staying dry and safe above the surface. The camera offers a 0.3MP, 1/4" CMOS image sensor and 640 x 480 resolution, and its lens provides a very wide angle of view of 160°. The dome port for the lens counteracts the decrease in coverage that occurs underwater by restoring a wider angle of view. The AquaLens also features anti-fogging technology for improved visibility.
Using the optional MyGica iGrabber or a similar accessory, you can record the live video feed from the AquaLens. The iGrabber connects to the topside box and offers simple push buttons that allow you to start and stop recording. At the other end is a USB plug for connection to your computer, where you can upload your captured videos. The AquaLens runs on a lithium rechargeable battery pack or on continuous topside power as an alternative, using the optional AC power adapter. A 100-240VAC smart charger is included, enabling use all over the world.
|
If you own a Aquabotix rovs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P:
| Image Sensor | 0.3 MP 1/4" / 6.4 mm MT9V136 CMOS with RGB Bayer color filter array | | Resolution | Actual: 680 x 512
Effective: 640 x 480p | | Aspect Ratio | 4:3 | | Color Depth | 8 colors per bitmap | | Sensitivity | Low-light sensitivity/responsivity: 11.9 V/lux-sec at 550 nm | | Lens | Angle of view: 160° | | Shutter Type | Electronic rolling | | Focus | Auto | | Focus Range | 6.0" / 15.2 cm to infinity | | Exposure Control | Auto | | Auto Functions | Exposure, white balance, black level offset correction, flicker avoidance, color saturation control, on-the-fly defect correction, aperture correction | | Video Frame Rate | Not specified by manufacturer | | Video System | NTSC | | Minimum Illumination | 0.01 Lux | | Lights | 8 cool white LED lights | | Power | Runs on lithium-ion rechargeable battery pack (included)
Battery run time: approx. 5.0-8.0 hr, depending on whether LEDs are on or off
Operating voltage: 9.6-12 VDC
Topside box powers LED lights on and off
As alternative to batteries, use continuous 12 VDC topside power via the optional AC power adapter | | Type | Color LCD monitor integrated into topside box | | Size | 3.5" / 8.9 cm | | Resolution | 320x240 | | Video Output | Type: not specified by manufacturer | | Depth Rating | 10' / 3.0 m | | Buoyancy | Positive | | Indicators | 3 LEDs for battery level indication
All lights on: good operating power
Two lights including yellow on: low operating power
Only red light on: immediate need for recharging | | Connectivity | 6-pin IP68 sealed connector | | Depth Rating | 300' / 91.4 m (O-ring seal) | | Lens Port | Removable dome with anti-fogging technology | | Moisture Alarm | Not specified by manufacturer | | Operating Temperature | 35.6 to 104°F / 2.0 to 40°C
Recommended: 35.6 to 89.6°F / 2.0 to 32°C | | Connectivity | 6-pin 25' / 7.6 m Kevlar-reinforced cable with polyurethane outer jacket for connection to topside box
Polypropylene insulation
Tensile strength: 300 lb / 136.1 kg
Waterproofing: plug-and-play IP68 sealed connectors
Optional 25' / 7.6 m, 50' / 15.2 m and 150' / 45.7 m cable extensions are available and can be combined for a total of up to 500' / 152.4 m | | Mounting | Thread angular boat hook / pole adapter into hole on back of AquaLens
Thread boat hook or pole into adapter | | Material of Construction | AquaLens body: ABS plastic
Dome port: acrylic | | Dimensions | Diameter: 5.0" / 12.7 cm | | Weight | AquaLens body: 3.0 lb / 1.4 kg
Total system: 10 lb / 4.5 kg | | Package Weight | 7.0 lb | | Box Dimensions (LxWxH) | 16.0 x 12.0 x 12.0" | |
The user manual for the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P can be downloaded in .pdf
format if it did not come with your new rovs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Aquabotix users keep a unique electronic library
for Aquabotix rovss,
where you can use our link to download the user manual for the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P.
The user manual lists all of the functions of the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P,
all the basic and advanced features and tells you how to use the rovs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Aquabotix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P. User manuals are also
available on the Aquabotix website under Photography - Underwater Photography - ROVs.
Question and answer discussion forum concerning user instructions and resolving problems with the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Aquabotix AquaLens Pro Portable Underwater 02-01-00-0000P
|
|
|
|
|
