|
User manual for Ashly NX3.02 Programmable Output Power Amplifier NX3.02
- Manufacturer: Ashly
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your Ashly
- Settings and expert assistance
- Contact Ashly service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Ashly NX3.02 Programmable Output Power Amplifier NX3.02,
which address similar problems with connecting and setting up Power Amplifiers Ashly.
|
User manual for the Ashly NX3.02 Programmable Output Power Amplifier NX3.02
The user manual for the Ashly NX3.02 Programmable Output Power Amplifier NX3.02 provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The Ashly NX3.02 Programmable Output Power Amplifier features lightweight, energy efficient Class D switching amplifier technology combined with a switch mode power supply. The NX3.02 amplifier is designed to meet the needs of demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.
|
If you own a Ashly power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Ashly NX3.02 Programmable Output Power Amplifier NX3.02 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Ashly NX3.02 Programmable Output Power Amplifier NX3.02:
| Output Power | Per Channel, EIAJ Test Standard, 1 kHz, 20 Hz to 20 kHz, 1%THD, Low Z Output, All Channels Driven
2 Ω: 3,000 W
4 Ω: 2,000 W
8 Ω: 1,250 W
Low Z output, Bridge Mode, 20 Hz to 20 kHz, 1%THD, All Channels Driven
4 Ω: 6,000 W
70 V, 100 V Output, All Channels Driven
70 V (per channel): 2,450 W
100 V (per channel): 1,250 W | | Power Draw | Sleep Mode: < 1 W
Standby Mode: 40 W
Idle (no signal): 55 W | | Current Draw | 120 VAC Mains (Divide by 2 for 240 V)
Sleep Mode: 0.1 A
Standby Mode: 0.70 A
Idle (no signal): 1.00 A
All Channels Driven (Divide by 2 for 240 VAC)
Typical: 14.7 A | | Dissipation | Thermal (All Channels Driven)
Sleep Mode: 3.4 BTU/hr
Standby Mode: 136 BTU/hr
Idle (no signal): 187 BTU/hr
Typical (1/8 maximum power): 1360 BTU/hr | | Voltage Gain | Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V | | Damping Factor | >250 (8 Ω load <1 kHz) | | High-Pass Filter | Input: 80 Hz 2nd order | | Distortion | SMPTE (typical): <0.5%
THD-N (typical): <0.5% (8 Ω, 10 dB below rated power,20 Hz to 20 kHz) | | Channel Separation | -75 dB (dB from full output, 1 kHz) | | Signal to Noise Ratio | 20 Hz to 20 kHz (unweighted): >114 dB | | Frequency Response | 20 Hz to 20 kHz, +/-0.05 dB | | Input Connector | Balanced: Euroblock 3.5 mm, 1/4" TRS and XLR Combo jack | | Input Impedance | 10 kΩ | | Maximum Input Level | +21 dBu | | Output Connector | Speaker: Neutrik speakON | | Connection | Data: Euroblock 3.5 mm - Gnd, 18 V, In, Out | | Level Control | Remote DC: Euroblock 3.5 mm - Gnd, CV, V+ per input | | Attenuation | Per Channel: Front panel, software, offset link group, and remote. Fully off = Mute | | Protection | Amplifier: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses | | Cooling | Continuously variable temperature controlled axial fan(s) | | Environmental | 32 to 113˚F (0 to 45˚C) non condensing | | Dimensions (W x H x D) | 19.0 x 3.5 x 16.8" (482.6 x 88.9 x 426.7 mm) | | Weight | < 28.0 lb (12.7 kg) | | Package Weight | 30.0 lb | | Box Dimensions (LxWxH) | 19.0 x 16.0 x 4.0" | |
The user manual for the Ashly NX3.02 Programmable Output Power Amplifier NX3.02 can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Ashly users keep a unique electronic library
for Ashly power amplifierss,
where you can use our link to download the user manual for the Ashly NX3.02 Programmable Output Power Amplifier NX3.02.
The user manual lists all of the functions of the Ashly NX3.02 Programmable Output Power Amplifier NX3.02,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Ashly service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Ashly NX3.02 Programmable Output Power Amplifier NX3.02. User manuals are also
available on the Ashly website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Ashly NX3.02 Programmable Output Power Amplifier NX3.02 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Ashly NX3.02 Programmable Output Power Amplifier NX3.02
|
|
|
|
|
