|
User manual for Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Astatic
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Paging & Security
- Safety instructions
- Startup and operation of the paging & security
- Tips for setting up your Astatic
- Settings and expert assistance
- Contact Astatic service
- Troubleshooting
- Warranty information
- Price: 87 USD
|
We recommend checking out our discussion threads on the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2,
which address similar problems with connecting and setting up Paging & Security Astatic.
|
User manual for the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2
The user manual for the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Paging & Security.
The Astatic 878HL Desktop Microphone is intended for use with commercial paging systems in schools, restaurants, warehouses, medical facilities, etc. The microphoe is built tough and features an omnidirectional pickup pattern for a generous, forgiving audio pickup area. A programmable, push-to-talk and lift-to-talk switch is provided and flexible output impedance makes the 878HL flexible for use with most paging systems and amplifiers. The 878HL is supplied with 2.1m (7 ft.) of four-conductor, two-shielded cable, wired normally-open for relay control.
|
If you own a Astatic paging & security and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2:
Transducer | Dynamic | Polar Pattern | Omnidirectional | Frequency Response | 80Hz to 12kHz | Dynamic Range (Typical) | Not Specified By Manufacturer | Signal-to-Noise Ratio | Not Specified By Manufacturer | Maximum Input Sound Level | Not Specified By Manufacturer | Power Requirements | None, Dynamic | Output Impedance | HiZ: 40k ohms LoZ: 400 ohms | Output Connectors | Four-conductor, two-shield | Pad | No | Low Frequency Roll-Off | No | Dimensions (WxHxD) | Not Specified By Manufacturer | Weight | Not Specified By Manufacturer | Package Weight | 1.55 lb | Box Dimensions (LxWxH) | 10.6 x 8.4 x 4.8" | |
The user manual for the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2 can be downloaded in .pdf
format if it did not come with your new paging & security, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Astatic users keep a unique electronic library
for Astatic paging & securitys,
where you can use our link to download the user manual for the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2.
The user manual lists all of the functions of the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2,
all the basic and advanced features and tells you how to use the paging & security.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Astatic service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2. User manuals are also
available on the Astatic website under Pro Audio - Installation Sound - Paging & Security.
Question and answer discussion forum concerning user instructions and resolving problems with the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Astatic 878HL Omnidirectional Dynamic Desktop Microphone 878HL-2
|
|
|
|
|