|
User manual for ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00
- Manufacturer: ATTO Technology
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
- Safety instructions
- Startup and operation of the network switches, bridges & hubs
- Tips for setting up your ATTO Technology
- Settings and expert assistance
- Contact ATTO Technology service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs ATTO Technology.
|
User manual for the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00
The user manual for the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00 provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
The Single Power Supply FiberBridge 6500 2-Port FC to SAS/SATA Controller from ATTO Technology is a performance tuned, manageable protocol translator which allows FC initiators to communicate with SAS/SATA target devices. The FiberBridge 6500 allows your SAS/SATA disk storage to integrate into a Fiber Channel SAN. This provides the benefit of increased availability and scalability, while allowing the use of direct attached storage on a shared Fiber Channel network.
|
If you own a ATTO Technology network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00:
Form Factor | 1U Rackmount, Single power supply | Data Transfer Rate | Up to 1200 Mb/s | Disk Device Support | SAS/SATA: Up to 254 | Air Flow | 11 CFM [ambient air not to exceed 104°F (40°C)] | Input Connectors | 2 x 8 Gb Fibre channel SFP | Output Connectors | 2 x 6 Gb x 4 mini-SAS QSFP SFF-8436 | Connectivity | All connectors are on rear side of bridge External LEDs for power, ready and alert status,Fibre Channel activity, link status and speed, and SAS link status Statistic reporting for all bridge ports | Fibre Channel Connections | 2 x 8 Gb SFP + Fibre channel connectors Optical SFP + modules included Auto negotiates to 8/4/2 Gb Full support for FC-AL, FC-AL2, FC-FLA, FC-FS, FCP-3, FC-PLDA Private loop, public loop, point-to-point, or fabric point-to-point with support for direct connection to F-port switches Fibre channel retry logic for FLOGI and PLOGI | SAS Device Connectors | Auto negotiates to 6/3/1.5 Gb Supports passive and active copper Supports SAS and SATA disk devices Supports SAS tape devices Supports up to 10 levels of SAS expanders | Management Interfaces | 10/100/1000 RJ-45 Ethernet port Support for SNMP, SNTP, Telnet, FTP, ICMP | Management Tools | User-friendly ExpressNAV storage manager provides remote configuration, management, and diagnostic capabilities Local diagnostics supported via Command Line Interface (CLI), Telnet, and FTP SCSI Enclosure Services (SES) monitor critical components to provide system feedback Persistent event log gathers up to 40000 hardware, software, and network events to assist in overall system trouble-shooting Retrieve event logs through the Ethernet port Switchable dual firmware ROM images Performance monitoring and error logging Temperature monitoring Phone home email notification of errors Real Time Clock (RTC) Audible alarm | Bridge Operation | Temperature: 41 to 104°F (5 to 40°C) Humidity: 10 to 90% (non-condensing) | Bridge Storage | Temperature: -40 to 157°F (-40 to 70°C) Humidity: 10 to 95% (non-condensing) | Power Supply | Input 85 to 264 VAC, 1 A, 47 to 63 Hz | Compatibility | FCC Part 15 Class A, CE, VCCI, AS/NZS, CISPR 22, EN55022: 2006, Class A, EN55024, EN61000, CoC (South Africa) | Agency Approvals & Certifications | EN 60950, CSA 60950, CB IEC 60950-1, UL 60950, IRAM, GOST-R, BSMI, C-TICK | Compliance | RoHS 2002/95/EC | Dimensions (L x W x H) | 9.90 x 17.31 x 1.69" (25.14 x 43.96 x 4.29 cm) | Weight | 8.75 lb (3.97 kg) | |
The user manual for the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00 can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other ATTO Technology users keep a unique electronic library
for ATTO Technology network switches, bridges & hubss,
where you can use our link to download the user manual for the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00.
The user manual lists all of the functions of the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from ATTO Technology service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00. User manuals are also
available on the ATTO Technology website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the ATTO Technology Single Power Supply FiberBridge FCBR-6500-D00
|
|
|
|
|