User manual Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W
Operating instructions and pdf manual for use - Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W User manual, User manual Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W, Aurora, Multimedia, DXW-2E-S3C, Receiver, White, DXW
User manual for Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W
Startup and operation of the dvi/vga kvm extenders
Tips for setting up your Aurora Multimedia
Settings and expert assistance
Contact Aurora Multimedia service
Troubleshooting
Warranty information
Click to enlarge image
We recommend checking out our discussion threads on the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W,
which address similar problems with connecting and setting up DVI/VGA KVM Extenders Aurora Multimedia.
User manual for the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W
The user manual for the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W provides
necessary instructions for the proper use of the product Computers & Solutions - Computer Peripherals - DVI/VGA KVM Extenders.
The DXW-2E-S3C Receiver and White HDBaseT Wall Plate Kit from Aurora Multimedia is a one-room one-cable kit. This kit includes a white DXW-2E wall plate, a DXE-CAT-RX3C receiver unit, and a PS0062-1 power supply.
The DXW-2E wall plate installs into a standard 2-gang outlet box and functions as a switcher, converter, and extender. It converts VGA or HDMI to HDBaseT and transmits it up to 600' to the DXE-CAT-R3C receiver unit. It simultaneously also supports an Ethernet input to provide you with internet access on the receiver end.
The DXE-CAT-RX3C is designed to receive HDMI signals from up to 600' away. It features HDBaseT technology which allows the unit to operate 600' away via a single CAT6A shielded cable, and extend at 1080p, 60 Hz, 24-bit color depth. The RS-232, IR, and LAN signals can be sent over the same cable bi-bidirectionally. The DXE-CAT-RX3C features built-in relays for screen control and an amplifier. It has power, status, HDMI, HDBaseT, RS-232, TX/RX and In/Out front panel LED indicators and a front panel Reset button.
If you own a Aurora Multimedia dvi/vga kvm extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W:
Front panel: 2 x 3.5 mm phone jack TRS, audio input 1 x RJ45, Ethernet port, network pass-through 1 x 15-pin Sub-D female, VGA input 1 x 19-pin Type A, HDMI input Rear Panel: 1 x 4-pin 3.81 mm Euro, RS-232 1 x RJ45, HDBaseT 1 x 2-pin 3.81 mm Euro, 24 VDC power input
Buttons
1 x Left side source selector (with red/green/blue LED) 1 x Right side source selector (with red/green/blue LED)
Control
IR pass-through for controlling remote devices Capable of being controlled remotely through compatible receiver
Compliance
HDMI 3D, HDCP
Distance
1080p, 60 Hz, 48-bit: 330' (100 m) over one CAT 5e/6/7 cable 1080p, 60 Hz, 24-bit: 500' (152 m) over one CAT 6 cable 1080p, 60 Hz, 24-bit: 600' (183 m) over one CAT 6a cable
Pixel Clock Frequency
<= 225 MHz @ 330' (100 m) over CAT 5e/6 >225 MHz @ 230' (70 m) over CAT 5e/6 >225 MHz @ 330' (100 m) over CAT 6a/7
48-bit 330.0' (100.5 m) (CAT5e) 24-bit 600' (183 m) (CAT6A)
HDMI
1.4 3D
RS-232
Maximum 115 kb/s
Line In/Out
Balanced
Relays
2 x Normally open
IR Frequency Range
Input & Output: 30 Hz to 100 kHz
LAN
2 x 10/100 PoE: Port 1
Control
IP control system
LED Status Indicators
Power, Status, HDMI, HDBaseT, RS-232 TX/RX, IR In/Out (in front of the unit)
Selection
Front Selections: Reset/Setup
Distance
CAT 5e/6/6a/7: 328' (100 m) - 1080p 60 Hz 24- and 36-bit (when pixel clock is <= 225 MHZ for CAT5e/6) CAT 6a/7: 328' (100 m) - 1080p 60 Hz 48-bit (when pixel clock is > 225 MHz) CAT 5e/6/6a/7: 230' (70 m) - 1080p 60 Hz 48-bit (when pixel clock is > 225 MHz for CAT6a/7) CAT 6: 500' (152 m) - 1080p 60 Hz 24-bit (long reach mode) CAT6a: 600' (183 m) - 1080p 60 Hz 24-bit (long reach mode)
Connectors
LAN: Dual 8P8C with 2 LED indicators each HDBaseT: RJ-45 WE/SS 8P8C RS-232: 0.13" (3.5 mm) TRS IR: 0.13" (3.5 mm) TRS (auto sensing direction for blaster or receiver) HDMI: Type A 19-pin Power: 0.05" (1.35 mm) ID, 0.1" (3.5 mm) OD Relay: 0.14" (3.81 mm) Euro style green 4 position Line In/Out: Dual 0.14" (3.81 mm) Euro style green 5 position
Housing
Black aluminum enclosure
Mounting Configuration
Wall & rack
Power Supply
24 VDC, 90 W (only 1 required on RX)
Sold separately.
Power Consumption
5 W (typical)
Operation Temperature
32 to 104°F (0 to 40°C)
Storage Temperature
-4 to 140°F (-20 to 60°C)
Relative Humidity
20 to 90% RH (no condensation)
Dimensions (L x W x H)
8.5 x 3.8 x 1.3" (21.5 x 9.7 x 3.3 cm)
Weight
2.0 lb (0.9 kg)
24V, 24W Wallmount Power Supply
Power
24 V, 24 W
Connector
DC connector
The user manual for the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W can be downloaded in .pdf
format if it did not come with your new dvi/vga kvm extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Aurora Multimedia users keep a unique electronic library
for Aurora Multimedia dvi/vga kvm extenderss,
where you can use our link to download the user manual for the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W.
The user manual lists all of the functions of the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W,
all the basic and advanced features and tells you how to use the dvi/vga kvm extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Aurora Multimedia service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W. User manuals are also
available on the Aurora Multimedia website under Computers & Solutions - Computer Peripherals - DVI/VGA KVM Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Aurora Multimedia DXW-2E-S3C Receiver and White DXW-2E-S3C-W - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17