|
User manual for Axis Communications A1001 Network Door Controller 0540-001
- Manufacturer: Axis Communications
- Basic description and contents of package
- Product classification: Surveillance - Access Control - Access Controllers
- Safety instructions
- Startup and operation of the access controllers
- Tips for setting up your Axis Communications
- Settings and expert assistance
- Contact Axis Communications service
- Troubleshooting
- Warranty information
- Price: 570 USD
|
We recommend checking out our discussion threads on the Axis Communications A1001 Network Door Controller 0540-001,
which address similar problems with connecting and setting up Access Controllers Axis Communications.
|
User manual for the Axis Communications A1001 Network Door Controller 0540-001
The user manual for the Axis Communications A1001 Network Door Controller 0540-001 provides
necessary instructions for the proper use of the product Surveillance - Access Control - Access Controllers.
The A1001 Network Door Controller from Axis Communications gives you a stand-alone digital access control system that can be accessed from anywhere in the world with an internet connection, while offering easy integration with multiple A1001 units, alarm/fire panels, or IP surveillance systems. It uses an open, non-proprietary platform to be compatible with a wide range of hardware and software from many manufacturers. This open platform lets you choose the best products for the location and application, without the constraint of being dependent on a single manufacturer for all of the hardware and software.
|
If you own a Axis Communications access controllers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Axis Communications A1001 Network Door Controller 0540-001 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Axis Communications A1001 Network Door Controller 0540-001:
| Input/Output Connections | 2 x Card reader data terminal block:RS485 full-duplexRS485 half-duplexWiegand
2 x Card reader I/O terminal block:2 x four configurable I/ODigital input: 0 to 40 VDC maxDigital output: 0 to 40 VDC maxOpen drain: 100 mA maximum
1 x Auxiliary terminal block:3.3 VDC output, 100 mA maximum2 x configurable I/ODigital input: 0 to 40 VDC maximumDigital output: 0 to 40 VDC maximumOpen drain: 100 mA maximum
2 x Door connector terminal block:For door monitors and Request to Exit (REX)Digital input: 0 to 40 VDC maximum | | Network Connection | 1 x RJ45 10/100 Ethernet port | | Network Protocols | IPv4, HTTP, HTTPS, SSL/TLS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | | Security Protocol | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, Digest authentication, User access log | | Memory | RAM: 256 MB
Flash 4 GB | | Power Input | Power-over-Ethernet IEEE 802.3af/802.3at Type 1 Class 3
10 - 30 VDC, 26 W maximum | | Power Output | Power-out and relay: 1 x 12 VDC, 500 mA maximum; 1 x solid-state relay 30 VDC, 700 mA maximum
Power-out lock: 2 x 12 VDC, 500 mA maximum | | Approvals | EN 55022 Class B, EN 50130-4, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class B, ICES-003 Class B, C-tick AS/NZS CISPR22 Class B, VCCI Class B, IEC/EN/UL 60950-1, UL 294, UL 2043, EN 50581 | | Environmental | Operating temperature: 0 to 50°C (32 to 122°F)
Humidity: 20 to 85% non-condensing | | Dimensions | 7.1 x 7.1 x 1.8" (18.0 x 18.0 x 4.5 cm) | | Weight | 17.6 oz (500 g) | | Package Weight | 1.7 lb | | Box Dimensions (LxWxH) | 9.1 x 8.8 x 2.8" | |
The user manual for the Axis Communications A1001 Network Door Controller 0540-001 can be downloaded in .pdf
format if it did not come with your new access controllers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Axis Communications users keep a unique electronic library
for Axis Communications access controllerss,
where you can use our link to download the user manual for the Axis Communications A1001 Network Door Controller 0540-001.
The user manual lists all of the functions of the Axis Communications A1001 Network Door Controller 0540-001,
all the basic and advanced features and tells you how to use the access controllers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Axis Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Axis Communications A1001 Network Door Controller 0540-001. User manuals are also
available on the Axis Communications website under Surveillance - Access Control - Access Controllers.
Question and answer discussion forum concerning user instructions and resolving problems with the Axis Communications A1001 Network Door Controller 0540-001 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Axis Communications A1001 Network Door Controller 0540-001
|
|
|
|
|
