|
User manual for Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021
- Manufacturer: Axis Communications
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders
- Safety instructions
- Startup and operation of the video encoders & decoders
- Tips for setting up your Axis Communications
- Settings and expert assistance
- Contact Axis Communications service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021,
which address similar problems with connecting and setting up Video Encoders & Decoders Axis Communications.
|
User manual for the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021
The user manual for the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
The AXIS Communications AXIS P7214 4-Channel Video Encoder (NTSC) offers efficient integration of analog cameras into an IP-based video surveillance system and is ideal for locations such as gas stations, convenience stores, and small offices. This video encoder enables a cost-effective way to gain all the benefits of a professional network video without discarding the existing analog investments. The video encoder offers advanced network capabilities with great video performance and high audio quality. This video encoder provides H.264 and Motion JPEG streams. Support for H.264 offers a superb video compression format that drastically reduces bandwidth and storage requirements without compromising image quality. This video encoder offers one H.264 and one Motion JPEG stream per channel at full frame rate in all resolutions up to D1 720 x 480 NTSC. The encoder offers intelligent video capabilities such as video motion detection, active tampering alarm, and two-way audio with audio detection. The video encoder supports power over Ethernet (IEEE 802.3af), which enables the encoder to receive power through the network cable. It also supports pan, tilt, and zoom functions, thus enabling the control of analog PTZ cameras.
|
If you own a Axis Communications video encoders & decoders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021:
Number of Channels | 4-channel video encoder | Video Compression | H.264 (MPEG-4 Part 10 / AVC) Baseline and Main Profile Motion JPEG | Resolutions | 176 x 120 to 720 x 576, 176 x 120 to 1536 x 1152 for quad view | Frame Rate H.264 | 30 fps (NTSC) 15 fps in quad view in full resolution | Frame Rate Motion JPEG | 30 fps (NTSC) 15 fps in quad view in full resolution | Video Streaming | One individually configured H.264 and one Motion JPEG stream per channel at full frame rate More streams if identical or limited in frame rate/resolution Controllable frame rate and bandwidth VBR/CBR H.264 | Image Settings | Compression, color, brightness, contrast Rotation: 90, 180, and 270° Aspect ratio correction, mirroring of images, text and image overlay, privacy mask, enhanced de-interlace filter, video termination, antialiasing, temporal noise filtering | Audio Streaming | Two-way, full duplex, and half duplex (mic / line input 1 / line output). Two-way, full duplex, and half duplex (mic / line input 2 / line output) | Audio Compression | In: AAC-LC 8 or 16 kHz 8-64 kbit/s, G.711 μ-law PCM 8 kHz 64 Kbps G.726 ADPCM 8 kHz 32 Kbps or 24 Kbps Out: G.711 μ-law PCM 8 kHz 64 Kbps, μ-law PCM 16 kHz 128 Kbps G.726 ADPCM 8 kHz 32 Kbps or 24 Kbps | Audio Input / Output | External microphone input or line input Line level output Audio streaming, record (AU) and play uploaded (WAV, AU) clips AU (G.711 μ-law 8-bit 8/16 kHz mono), WAV (PCM 16-bit 8/16 kHz mono) | Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log | Supported Protocols | IPv4/v6, HTTP, HTTPS, IEEE 802.1X QoS layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1 /v2c / v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS | Application Programming Interface | Application Programming Interface | Intelligent Video | Video motion detection, active tampering alarm, audio detection | Alarm Triggers | Intelligent video, video loss, external inputs | Alarm Actions | File upload via FTP, HTTP and email; notification via email, HTTP and TCP; external output activation; video and audio recording to edge storage; pre- and post-alarm video buffering, PTZ preset, play audio clip | Pan/Tilt/Zoom | Up to 1, 100 presets / camera, guard tour, PTZ control queue Supports Windows-compatible joysticks Wide range of analog PTZ cameras supported (drivers available for download at www.axis.com) | Casing | Wall-mount | Processors and Memory | ARTPEC-4, 512 MB RAM, 128 MB Flash | Power | 8 to 20 VDC maximum: 7 W Power over Ethernet IEEE 802.3af Class 3 | Connectors | 1 x DC input terminal block 4 x analog composite video BNC inputs RJ-45 10BASE-T/100BASE-TX PoE Terminal block for four configurable external inputs / outputs Terminal block for RS-485/422 (full duplex) 2x 3.5mm jacks for microphone or line input (mono) 3.5mm jack for audio output (mono) | Edge Storage | 1x micro SDHC card | Operating Conditions | 32 to 122°F (0 to 50°C) Humidity 20 to 80% RH (non-condensing) | Approvals | EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2, EN 60950-1, C-tick AS/NZS CISPR 22, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, KCC Class B, UL / IEC / EN 60950-1 | Overall Dimensions | W x H: 6.8 x 4.3'' (172 x 109 mm) | Weight | 0.46 lb (210 g) | |
The user manual for the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021 can be downloaded in .pdf
format if it did not come with your new video encoders & decoders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Axis Communications users keep a unique electronic library
for Axis Communications video encoders & decoderss,
where you can use our link to download the user manual for the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021.
The user manual lists all of the functions of the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021,
all the basic and advanced features and tells you how to use the video encoders & decoders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Axis Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021. User manuals are also
available on the Axis Communications website under Surveillance - Surveillance Video - Video Transmission - Video Encoders & Decoders.
Question and answer discussion forum concerning user instructions and resolving problems with the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Axis Communications AXIS P7214 4-Channel Video Encoder 0417-021
|
|
|
|
|