|
User manual for Axis Communications F41 Main Unit 0658-001
- Manufacturer: Axis Communications
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Additional Accessories - Interface Modules
- Safety instructions
- Startup and operation of the interface modules
- Tips for setting up your Axis Communications
- Settings and expert assistance
- Contact Axis Communications service
- Troubleshooting
- Warranty information
- Price: 439 USD
|
We recommend checking out our discussion threads on the Axis Communications F41 Main Unit 0658-001,
which address similar problems with connecting and setting up Interface Modules Axis Communications.
|
User manual for the Axis Communications F41 Main Unit 0658-001
The user manual for the Axis Communications F41 Main Unit 0658-001 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Additional Accessories - Interface Modules.
Axis Communications' F41 Main Unit is designed to work with their F Series sensor units as a discreet surveillance solution such as at ATMs, controlled access points, or in fleet or emergency vehicles. The F41 main unit supports the Axis F1005-E, Axis 1015, Axis 1025, and Axis F1035-E sensor units that are available in two cable lengths: 10' or 39' for flexible installation. Furthermore, the F41 is able to capture video in up to 1080p HD resolution at a frame rate of 60 fps with a single media stream, or at 30 fps with dual streams when using H.264 compression. Multiple imaging technologies provide enhanced image quality and clarity in all lighting conditions, especially in low light or with extremes of bright and dark in the same shot.
|
If you own a Axis Communications interface modules and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Axis Communications F41 Main Unit 0658-001 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Axis Communications F41 Main Unit 0658-001:
Resolution | 1920 x 1200 to 160 x 90 | Frame Rate | H.264: 2 streams in 1920x1080 at 30fps 1 stream in 1920x1080 at 60 fpsMotion JPEG: 2 streams in 1920x1080 at 30fps 1 stream in 1920x1080 at 30 fps | Compression | Video: H.264 (MPEG-4 Part 10/AVC) Baseline, Main and High profiles Motion JPEGAudio: AAC 8/16/32 kHz, 8-128 kbit/s AAC LC 8/16/32 kHz, 8-128 kbit/s G.711 PCM 8 kHz 64 kbit/s G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s Configurable bit rate | Audio | 1 x 3.5 mm mic/line in 1 x 3.5 mm line out | Alarm Connectors | 6-pin Terminal block for 4 configurable inputs/outputs (12 V DC output, max. load 50 mA) | Connectors | 1 x RJ12 connector for the sensor units 5-pin terminal block RS232 | Network Connection | Female RJ45 10 BASE-T/100 BASE-TX PoE | Supported Protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, CIFS/SMB, SSH. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit, and cryptographic software written by Eric Young | Memory | 512 MB RAM, 256 MB Flash | Memory Card | 1 x SD/HC/XC card slot, supports up to 64 GB | Power | Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1 Class 3, max 7.7 W 8 - 28 VDC, max 7.8 W | Approvals | ECE R10 rev.04 EN 50121-4, IEC 62236-4 IEC/EN/UL 60950-1 Safety IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-60, IEC 60068-2-78, IEC 60529 IP4X IP rating EN 55022 Class B, EN 55024, EN 61000-6-1, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3 FCC Part 15, Subpart B, Class B ICES-003 Class B VCCI Class B C-Tick AS/NZS CISPR 22 Class B KCC KN22 Class B, KN24 EN 50581 EN 50155 | Environmental | Operating temperature: -22 to 140°F (-30 to 60°C) Storage temperature: -40 to 149°F (-40 to 65°C) Humidity: 10 to 85%,non-condensing | Dimensions | 4.1 x 3.0 x 1.1" (10.3 x 7.6 x 3.1 cm) | Weight | 1.2 lb (520 g) | Package Weight | 1.55 lb | Box Dimensions (LxWxH) | 7.5 x 6.5 x 2.9" | |
The user manual for the Axis Communications F41 Main Unit 0658-001 can be downloaded in .pdf
format if it did not come with your new interface modules, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Axis Communications users keep a unique electronic library
for Axis Communications interface moduless,
where you can use our link to download the user manual for the Axis Communications F41 Main Unit 0658-001.
The user manual lists all of the functions of the Axis Communications F41 Main Unit 0658-001,
all the basic and advanced features and tells you how to use the interface modules.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Axis Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Axis Communications F41 Main Unit 0658-001. User manuals are also
available on the Axis Communications website under Surveillance - Surveillance Video - Additional Accessories - Interface Modules.
Question and answer discussion forum concerning user instructions and resolving problems with the Axis Communications F41 Main Unit 0658-001 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Axis Communications F41 Main Unit 0658-001
|
|
|
|
|