User manual Axis Communications F44 Main Unit 0659-001
Operating instructions and pdf manual for use - Axis Communications F44 Main Unit 0659-001 User manual, User manual Axis Communications F44 Main Unit 0659-001, Axis, Communications, F44, Main, Unit, 0659-001, Video
User manual for Axis Communications F44 Main Unit 0659-001
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
We recommend checking out our discussion threads on the Axis Communications F44 Main Unit 0659-001,
which address similar problems with connecting and setting up Interface Modules Axis Communications.
User manual for the Axis Communications F44 Main Unit 0659-001
The user manual for the Axis Communications F44 Main Unit 0659-001 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Additional Accessories - Interface Modules.
Axis Communications F44 Main Unit is designed to work with their F Series sensor units as a discreet surveillance solution, such as at ATMs, controlled access points, or in fleet or emergency vehicles. The F44 can support Axis's F1005-E, F1015, F1025, and F1035-E sensor units that are each available in two cable lengths - 10' or 39' - for flexible installation. Furthermore, the F44 main unit allows any combination of the four aforementioned sensor units to be integrated to better accommodate a wide range of surveillance environments.
Furthermore, the F44 is able to capture video in up to 1080p HD resolution at a frame rate of 60 fps with a single media stream, or at 30 fps with dual streams when using H.264 compression. Multiple imaging technologies provide enhanced image quality and clarity in all lighting conditions, especially in low light or with extremes of bright and dark in the same shot.
Multiple user-configured events trigger a variety of alarms to maximize security. A terminal block for external devices such as PIRs, door/window contacts, sirens and relays provides for additional layers of coverage, and allows the F44 to be integrated into alarm/fire panels to expand their capabilities and provide central station monitoring. When connected to the Internet, files can be saved to a remote NAS or monitoring computer. If not, files are saved to an on-board SD card, with cards up to 64GB supported.
The ONVIF-compliant VMS enables third-party applications and video analytics to be used for car/pedestrian counting, facial/license plate recognition, and tracking. Audio-in and -out terminals allow external microphones and speakers to be wired directly to the F44 for one- or two-way communication, integration into a PA system, for broadcasting audio files at predetermined times, such as a closing notification, or when an action rule has been tripped to alert intruders that authorities have been notified.
If you own a Axis Communications interface modules and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Axis Communications F44 Main Unit 0659-001 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Axis Communications F44 Main Unit 0659-001:
Specifications
Number of Channels
4
Resolution
1080p / HDTV 720p, quad view 1920 x 1080 to 160 x 90
Frame Rate
H.264 / MJPEG: In 1080p, 12.5/15 fps (50/60 Hz) In 720p, 25/30 fps (50/60 Hz)
Compression
H.264 / MPEG4 Part 10 / AVC, Baseline, Main and High Profiles, MJPEG
Audio
1 x 3.5 mm mic/line in 1 x 3.5 mm line out
Alarm Connectors
6-pin Terminal block for 4 configurable inputs/outputs (12 V DC output, max. load 50 mA)
Connectors
1 x RJ12 connector for the sensor units 5-pin terminal block RS232
Network Connection
Female RJ45 10 BASE-T/100 BASE-TX PoE
Supported Protocols
IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, CIFS/SMB, SSH. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit, and cryptographic software written by Eric Young
Memory
1024 MB RAM, 256 MB Flash
Memory Card
2 x SD / SDHC / SDXC slots Each slot supports a microSD card up to 64 GB
Power
PoE IEEE 802.3af / 802.3at Type 1 Class 3 Max 12.95 W; 8 to 28 VDC, max 13.33 W
Approvals
ECE R10 rev.04 EN 50121-4, IEC 62236-4 IEC/EN/UL 60950-1 Safety IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-60, IEC 60068-2-78, IEC 60529 IP4X IP rating EN 55022 Class B, EN 55024, EN 61000-6-1, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3 FCC Part 15, Subpart B, Class B ICES-003 Class B VCCI Class B C-Tick AS/NZS CISPR 22 Class B KCC KN22 Class B, KN24 EN 50581 EN 50155
Environmental
Operating temperature: -22 to 140°F (-30 to 60°C) Storage temperature: -40 to 149°F (-40 to 65°C) Humidity: 10 to 85%, non-condensing
The user manual for the Axis Communications F44 Main Unit 0659-001 can be downloaded in .pdf
format if it did not come with your new interface modules, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Axis Communications users keep a unique electronic library
for Axis Communications interface moduless,
where you can use our link to download the user manual for the Axis Communications F44 Main Unit 0659-001.
The user manual lists all of the functions of the Axis Communications F44 Main Unit 0659-001,
all the basic and advanced features and tells you how to use the interface modules.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Axis Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Axis Communications F44 Main Unit 0659-001. User manuals are also
available on the Axis Communications website under Surveillance - Surveillance Video - Additional Accessories - Interface Modules.
Question and answer discussion forum concerning user instructions and resolving problems with the Axis Communications F44 Main Unit 0659-001 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17