|
User manual for Barco FSN-1004 Fixed-Configuration Multi-Format R9004689
- Manufacturer: Barco
- Basic description and contents of package
- Product classification: Professional Video - Studio & EFP Equipment - Production Switchers
- Safety instructions
- Startup and operation of the production switchers
- Tips for setting up your Barco
- Settings and expert assistance
- Contact Barco service
- Troubleshooting
- Warranty information
- Price: 58 USD
|
We recommend checking out our discussion threads on the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689,
which address similar problems with connecting and setting up Production Switchers Barco.
|
User manual for the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689
The user manual for the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689 provides
necessary instructions for the proper use of the product Professional Video - Studio & EFP Equipment - Production Switchers.
The Barco FSN-1004 Fixed-Configuration Multi-Format Presentation Switcher is a multi-screen system centering on the FSN-1400 modular chassis. Instead of a physical controller for the chassis, the package comes with a GUI control software. The GUI can be run from a Mac or PC connected into an Ethernet port on the chassis. As part of the package, the highly-configurable chassis comes pre-configured with 5 Universal Input Cards (UIC), 2 Universal Output Cards (UOC), an M/E Card (M/E), a Multi-Viewer Card (MVR), and a System Card (SYS) with the above Ethernet port, two 9-pin serial ports, and a Ref In, Out and Loop on BNCs.
The 5 Universal Input Cards each feature 2 SDI inputs, 2 VGA inputs, and 2 DVI inputs. The Universal Output Cards likewise each have 2 SDI, 2 VGA, and 2 DVI outputs. All the VGAs are HD-convertible via optional adapters from Barco's Switcher Cable Kit. The M/E Card has 6 SDI AUX outputs. The Multi-Viewer Card is a 16 channel monitoring card with 2 SDIs, 2 DVIs, and an LTC input.
|
If you own a Barco production switchers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689:
Inputs | Universal Input Card 1 (UIC): 2x 3G/HD/SD-SDI, 2x VGA, 2x DVI inputs Universal Input Card 2 (UIC): 2x 3G/HD/SD-SDI, 2x VGA, 2x DVI inputs Universal Input Card 3 (UIC): 2x 3G/HD/SD-SDI, 2x VGA, 2x DVI inputs Universal Input Card 4 (UIC): 2x 3G/HD/SD-SDI, 2x VGA, 2x DVI inputs Universal Input Card 5 (UIC): 2x 3G/HD/SD-SDI, 2x VGA, 2x DVI inputs
Multi-Viewer Card (MVR): 1x LTC
System Card (SYS): 1x RJ45, 2x 9-pin serial ports, 1x Ref In on BNC, 1x Ref Loop on BNC | Outputs | Universal Output Card 1 (UOC): 2x 3G/HD/SD-SDI, 2x VGA, 2x DVI outputs Universal Output Card 2 (UOC): 2x 3G/HD/SD-SDI, 2x VGA, 2x DVI outputs
Multi-Viewer Card (MVR): 2x SDI, 2x DVI
M/E Card (M/E): 6x SDI AUX
System Card (SYS): 1x Ref Out on BNC | Inputs/Outputs | DVI: - All single-link DVI digital formats up to 165 Mhz, per DVI 1.0 specification - EDID version 1.3 compatible
HD-15 VGA: - NTSC/PAL composite and Y/C video SD YPbPr with bi-level sync HD YPbPr with tri-level sync per SMPTE 274, RGBHV/RGBS/RGsBB computer video with bi-level sync - Sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz are filtered and sampled at 170 Mhz, including but not limited to 1920 x 1200p, 2048 x 1080p - EDID version 1.3 compatible
3G/HD/SD-SDI: -3G-SDI per SMPTE 424 M; HD-SDI per SMPTE 292M, 296M; SD-SDI per SMPTE 259M-C (NTSC/PAL resolution)
DVI (Multi-Viewer): -All single-link DVI digital formats up to 1920 x 1200
SDI (Multi-Viewer): -720p and 1080p | Supported Resolutions | VGA 640 x 480 through WUXGA 1920 x 1200 HDTV 720p, 1080i, 1080p 2048 x 1080p digital cinema format Plasma display resolutions | Control | Ethernet RJ-45, 10/100 Mbps autosense | Input Power | 100-240 VAC, 50-60 Hz, 800 W max. on each supply | Operating Temperature | 32 to 104°F (0 to 40°C) | Operating Humidity | 0-95% non-condensing | Dimensions | FSN-1400 Chassis: 6RU 19 x 10.5 x 20.75" (48.2 x 26.7 x 52.7 cm) | Weight | FSN-1400 Chassis: 58 lb (26.3 kg) | |
The user manual for the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689 can be downloaded in .pdf
format if it did not come with your new production switchers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Barco users keep a unique electronic library
for Barco production switcherss,
where you can use our link to download the user manual for the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689.
The user manual lists all of the functions of the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689,
all the basic and advanced features and tells you how to use the production switchers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Barco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689. User manuals are also
available on the Barco website under Professional Video - Studio & EFP Equipment - Production Switchers.
Question and answer discussion forum concerning user instructions and resolving problems with the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Barco FSN-1004 Fixed-Configuration Multi-Format R9004689
|
|
|
|
|