User manual Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695
Operating instructions and pdf manual for use - Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695 User manual, User manual Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695, Barco, ImagePRO-II, Jr., All-in-One, Video, Scaler,
User manual for Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695
Manufacturer: Barco
Basic description and contents of package
Product classification: Professional Video - Signal Processing & Distribution - Signal Converters
Safety instructions
Startup and operation of the signal converters
Tips for setting up your Barco
Settings and expert assistance
Contact Barco service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695,
which address similar problems with connecting and setting up Signal Converters Barco.
User manual for the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695
The user manual for the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Signal Converters.
The Barco ImagePRO-II Jr. is an advanced high performance all-in-one video scaler, scan converter, switcher and transcoder converting any input signal format to any output format. ImagePRO-II supports Universal Analog, DVI single and dual link, HDMI, DisplayPort and SD/HD/3G SDI signal formats. Loop-through outputs are provided for the Analog, DVI and SDI input and genlock signals. The ImagePRO-II also features HDCP and EDID management, USB back up and restore, multiple video effects and a web page interface.
If you own a Barco signal converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695:
Digital Formats: all single-link DVI digital formats up to 165 Mhz, per DVI 1.0 Specification
Analog Formats: NTSC/PAL composite and Y/C video, SD YPbPR with bi-level sync, HD YPbPr with tri-level sync, RGBHV/RGBS/RGsB computer video with bi-level sync
Analog Sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz are filtered and sampled at 170 Mhz, including but not limited to 1920x1200p, 2048x1080p
Active loop-through output of all input signals, including HDCP and EDID
EDID version 1.3 compatible HDCP version 1.4 compatible
VGA
1 x HD-15 VGA port
Formats: NTSC/PAL composite and Y/C video SD YPbPr with bi-level sync HD YPbPr with tri-level sync per SMPTE 274, RGBHV/RGBS/RGsB computer video with bi-level sync
Sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz are filtered and sampled at 170 Mhz, including but not limited to: 1920x1200p, 2048x1080p
Active loop-through output of all input signals
EDID version 1.3 compatible
SDI
1 x BNC port
Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
DVI
Formats: all single-link DVI digital formats up to 165 Mhz, per DVI 1.0 specification
EDID version 1.3 compatible
HDCP version 1.4 compatible
VGA
Formats: NTSC/PAL composite on green, NTSC/PAL Y/C video with bi-level sync on Y only, (Y: Green, C: Red); SD YPbPr with bi-level sync; HD YPbPR with tri-level sync per SMPTE 274; RGBHV/RGBS/RGsB computer video with bi-level sync
Analog Ref Input/Loop/Output on BNC connectors; Bi-level and Blackburst at SD and Tri-level at HD or locked to any input
Remote Control
USB 1.1 Ethernet RJ-45, 10/100 Mbps Autosense Computer, tablet, smartphone, or external Encore or ScreenPRO-II Controller via Ethernet link Control functions include: source input configuration, output format selection, test pattern selection, transition effect selection and control
Input Power
100-240 VAC, 47-63 Hz, auto-selecting 2.0A maximum
Environmental
32 to 104°F / 0 to 40°C 0 to 95% humidity, noncondensing
The user manual for the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695 can be downloaded in .pdf
format if it did not come with your new signal converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Barco users keep a unique electronic library
for Barco signal converterss,
where you can use our link to download the user manual for the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695.
The user manual lists all of the functions of the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695,
all the basic and advanced features and tells you how to use the signal converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Barco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695. User manuals are also
available on the Barco website under Professional Video - Signal Processing & Distribution - Signal Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the Barco ImagePRO-II Jr. All-in-One Video Scaler, Scan R9004695 - no comments have been made yet - be the first to add a comment