|
User manual for Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394
- Manufacturer: Bosch
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - PAL Security Cameras
- Safety instructions
- Startup and operation of the pal security cameras
- Tips for setting up your Bosch
- Settings and expert assistance
- Contact Bosch service
- Troubleshooting
- Warranty information
- Price: 528 USD
|
We recommend checking out our discussion threads on the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394,
which address similar problems with connecting and setting up PAL Security Cameras Bosch.
|
User manual for the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394
The user manual for the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - PAL Security Cameras.
The Bosch LTC 0630/51 Dinion 2X Day/Night Camera with a 1/2" CCD Sensor produces high-quality images at a resolution up to 540TVL. The 2X Digital signal processing increases sensitivity and the XF-Dynamic technology extends the dynamic range, making for sharp, detailed imagery with accuracy in color reproduction. With the SmartBLC feature, the Dinion 2X Day/Night Camera adjusts video gain to correct the exposure when the object being captured is in front of a bright light source. Auto Black caps the lens to exclude all light and automatically sets the camera's circuitry to produce a standard black reference level.By increasing the IR sensitivity, the Day/Night camera offers clear images even in low light conditions. The built-in IR filter automatically switches from color to monochrome either by sensing the illumination level or through the alarm input. The SensUp Dynamic feature improves the sensitivity by increasing the integration time up to 10 times on the CCD, providing clear images in lighting conditions as low as 0.2 lux. With six pre-programmed modes, the 2X Day/Night Camera supports typical applications; the modes can also be programmed for individual requirements. The Bilinx technology allows you to change the camera settings, check status, and update firmware from anywhere via the coaxial cable. The technology uses the standard video cable to transmit alarm and status messages, improving the overall performance of the camera and reducing the service/installation time. On motion detection, the camera displays an alarm in the video signal, closes the output relay or transmits an alarm message via Bilinx. With the global scene change detector, it reduces false alarms that can be caused by sudden changes in lighting condition - for instance, switching on or off the indoor or security lighting. The day/night camera features a LensWizard, which detects lens type automatically and helps maintain accurate lens focus. With the multi-language On-Screen Display (OSD), power and alarm connections, and a built-in test pattern generator, the camera is easy to install. It is suitable for applications such as tunnels, car parks, prisons, ports, military facilities, casinos, gambling centers, etc.
|
If you own a Bosch pal security cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394:
Signal System | PAL | Image Sensor | 1/2" Color CCD | Number of Pixels | 752 x 582 | Resolution | 540 TVL | Sensitivity | Color 30 IRE: 0.0991 lux (0.0097 fc) 50 IRE: 0.31 lux (0.029 fc) 100 IRE: 1.40 lux (0.13 fc) Color + 10x SensUp 30 IRE: 0.00991 lux (0.0009 fc) 50 IRE: 0.031 lux (0.0029 fc) 100 IRE: 0.14 lux (0.013 fc) Monochrome 30 IRE: 0.0391 lux (0.0036 fc) 50 IRE: 0.121 lux (0.0112 fc) 100 IRE: 0.57 lux (0.053 fc) Monochrome + 10x SensUp 30 IRE: 0.00391 lux (0.00036 fc) 50 IRE: 0.0121 lux (0.00112 fc) 100 IRE: 0.057 lux (0.0053 fc) | Signal-to-Noise Ratio | >50dB | Video Output | Composite video 1 Vpp, 75 ohms | Synchronization | Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable | Shutter | Auto (1/50 [1/60] to 1/10000)selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable | Sensitivity | Up: Adjustable from Off up to 10x | Day/Night | Color, Mono, Auto | Auto Black | Automatic continuous, Off | Dynamic Engine | XF-Dynamic, SmartBLC | Dynamic Range | 96 dB (16-bit image processing) | Noise Reduction | Dynamic: Auto, On/off selectable | Sharpness | Sharpness enhancement level selectable | SmartBLC | On/Off | AGC (Automatic Gain Control) | AGC On or Off (0 to 30 dB) selectable | Peak White Invert | On/Off | White Balance | ATW, ATWhold and manual (2500 to 10000K) | Alarm Output | VMD or Bilinx | Alarm Input | TTL: Profile switching, +3.3 V nominal, +40 VDC maximum | Alarm Output | Relay: 30 VAC or +40 VDC, maximum 0.5 A continuous, 10 VA | Synchronization | External Input: 75 ohms or high impedance selectable | Cable Compensation | Up to 3000' (1000 m) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication) | Camera ID | 17 character editable string, position selectable | Test Pattern Generator | Color bars 100%, Greyscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane | Lens Type | Manual, DC- and Video-Iris auto-detect with override DC-Iris Drive: Maximum 50 mA continuous Video-Iris: 11.5 VDC ±0.5, maximum 50 mA continuous | Lens Mount | CS (maximum lens protrusion 5 mm, 0.2 inch), C-mount compatible with supplied adapter ring | Modes | 6 preset programmable modes | Remote Control | Bilinx coaxial bi-directional communication | Video Motion Detection | One area, fully programmable | Privacy Masking | Four independent areas, fully programmable | Controls | OSD with soft-key operation (multi-lingual) | Power Consumption | 350 mA (12 VDC) 250 mA (24 VAC) 70 mA (120 to 240 VAC) | Operating Temperature | -4 to 131°F (-20 to 55°C) | Storage Temperature | -40 to 158°F (-40 to 70°C) | Operating Humidity | 20 to 93% RH | Storage Humidity | Up to 98% RH | Tripod Mount | Bottom (isolated) and top 1/4" 20 UNC | Electro Magnetic Compatibility | Emission: EN55022 class B, FCC part 15 class B, EN6100-3, EN50121-4 Immunity: EN50130-4 (CE), EN50121-4 (CE) Vibration: Camera with 0.4 kg (1.1 lb) lens according to IEC60068-2-6 | Safety | UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE), EN61000-3-2 2000 +A2:2005, EN61000-3-3 1995 +A1:2001 +A2:2005 | Certification | USA: UL, FCC | Dimensions (H x W x L) | 2 x 3 x 5" (58 x 66 x 122 mm) without lens | Weight | 16 oz (450 g) | Package Weight | 1.7 lb | Box Dimensions (LxWxH) | 6.8 x 3.9 x 3.6" | |
The user manual for the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394 can be downloaded in .pdf
format if it did not come with your new pal security cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Bosch users keep a unique electronic library
for Bosch pal security camerass,
where you can use our link to download the user manual for the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394.
The user manual lists all of the functions of the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394,
all the basic and advanced features and tells you how to use the pal security cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Bosch service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394. User manuals are also
available on the Bosch website under Surveillance - Surveillance Video - PAL Security Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Bosch LTC 0630/51 Dinion 2X Day/Night Camera (PAL) F.01U.081.394
|
|
|
|
|