User manual Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA
Operating instructions and pdf manual for use - Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA User manual, User manual Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA, Cisco, 200, Series, Small, Business, SG200-50, Eth
User manual for Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
Startup and operation of the network switches, bridges & hubs
Tips for setting up your Cisco
Settings and expert assistance
Contact Cisco service
Troubleshooting
Warranty information
Price: 488 USD
We recommend checking out our discussion threads on the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs Cisco.
User manual for the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA
The user manual for the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
The 200 Series Small Business SG200-50 Ethernet Smart Switch from Cisco is an Ethernet network switch designed to give you better management, security, and quality of service features than an unmanaged or consumer-grade switch at a lower cost than a managed switch. This particular switch features a total of 50 Gigabit Ethernet ports; however, two of those ports are a combination of RJ-45 Gigabit Ethernet and mini Gigabit Interface Converter (mini-GBIC) expansion slots. With those expansions slots, you have the option to add fiber optic or Gigabit Ethernet uplink connectivity to the switch.
In addition to these ports, the switch includes Quality of Service features that allow you to prioritize latency-sensitive applications, such as IP telephony or video surveillance. The switch also provides native support for both IPv4 and IPv6, which allows you to take advantage of the latter protocol as it becomes more prevalent and widespread in the future. So as to safeguard your network, the switch utilizes IEEE 802.1X port security to control access to your network and reduce the risk of a security breach.
In setting up the switch, it can discover all connected Cisco devices on your network, share info between these devices, and also give you information, such as Serial numbers, IP addresses, and the like for quick deployments.
If you own a Cisco network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA:
Spanning Tree: Standard 802.1d STP support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Port Grouping: Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) ·Up to 4 groups ·Up to 4 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN: Support for up to 128 VLANs simultaneously (out of 4096 VLAN IDs) Port-based and 802.1Q tag-based VLANs
Voice VLAN: Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
Internet Group Management Protocol (IGMP) Versions 1 and 2 Snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
Head-of-Line (HOL) blocking: HOL blocking prevention
Port Security: Locks MAC addresses to ports, and limits the number of learned MAC addresses
Storm Control: Broadcast, multicast, and unknown unicast
Quality of Service
Priority Levels: 4 hardware queues
Scheduling: Strict priority and weighted round-robin (WRR) Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
Class of Service: Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
Rate Limiting: Ingress policer, per VLAN, and per port
IPv6
IPv6: IPv6 host mode IPv6 over Ethernet Dual IPv6/IPv4 stack IPv6 neighbor and router discovery (ND) IPv6 stateless address auto-configuration Path maximum transmission unit (MTU) discovery Duplicate address detection (DAD) Internet Control Message Protocol (ICMP) version 6 IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) support
IPv6 QoS Prioritize IPv6 packets in hardware
Multicast Listener Discovery (MLD) Snooping: Deliver IPv6 Multicast Packets only to the Required Receivers
IPv6 Applications: Web, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), RADIUS, syslog, DNS client
IPv6 RFCs Supported: RFC 2463: ICMP version 6 RFC 3513: IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 2461: Neighbor discovery for IPv6 RFC 2462: IPv6 stateless address auto-configuration RFC 1981: Path maximum transmission unit (MTU) discovery RFC 4007: IPv6 scoped address architecture RFC 3484: Default address selection mechanism RFC 4214: ISATAP tunneling RFC 4293: MIB IPv6: Textual conventions and general group RFC 3595: Textual conventions for IPv6 flow label
Management
Web User Interface Remote Monitoring (RMON) IPv4 and IPv6 Firmware upgrade Port mirroring VLAN mirroring DHCP (Options 66 and 67) Text-editable config files Smartports Cloud services Localization Other management: HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog
Power Management
Energy Detect Cable length detection
MAC Address Table Size
Up to 8000 MAC addresses
Frame Size
Frame sizes up to 10KB supported
Ports
50x Total Ports 48x RJ-45 10/100/1000 Ethernet Ports 2x RJ-45 10/100/1000 and SFP Combo Ports
Buttons
Reset Button
Cable
Requires: Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T
Minimum: ·Web browser: Mozilla Firefox version 2.5 or later; Microsoft Internet Explorer version 6 or later ·Category 5 Ethernet network cable ·TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network
Certifications
UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class
Environmental Requirements
Operating Temperature: 32° to 104°F / 0° to 40°C Storage Temperature: -4° to 158°F / -20° to 70°C Operating Humidity: 10% to 90%, relative, non-condensing Storage Humidity: 10% to 90%, relative, non-condensing
The user manual for the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cisco users keep a unique electronic library
for Cisco network switches, bridges & hubss,
where you can use our link to download the user manual for the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA.
The user manual lists all of the functions of the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cisco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA. User manuals are also
available on the Cisco website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the Cisco 200 Series Small Business SG200-50 Ethernet SLM2048T-NA - no comments have been made yet - be the first to add a comment