PDF-MANUALS.com | User manual here!
User manual

User manual Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA

Operating instructions and pdf manual for use - Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA User manual, User manual Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA, Cisco, SG200-08P, 8-Port, 10/100/1000, Gigabit, PoE, S


User manual for Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA

Overall rating 4.5
Overall Rating: 4.5

90% of respondents would recommend this to a friend.
Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA
  • Manufacturer: Cisco
  • Basic description and contents of package
  • Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
  • Safety instructions
  • Startup and operation of the network switches, bridges & hubs
  • Tips for setting up your Cisco
  • Settings and expert assistance
  • Contact Cisco service
  • Troubleshooting
  • Warranty information
  • Price: 123 USD
We recommend checking out our discussion threads on the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA, which address similar problems with connecting and setting up Network Switches, Bridges & Hubs Cisco.



User manual for the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA

The user manual for the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA provides necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.

The Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE Smart Switch lets you achieve business-class network security and performance at an affordable price. It provides an ideal solution when you require a reliable solution to share network resources and connect computers, printers and servers.

The Cisco SG200-08P smart switch provides basic management, security and quality-of-service features beyond those of an unmanaged or consumer-grade switch, at a lower cost than managed switches. And with an easy-to-use web user interface, Cisco Discovery Protocol and Cisco Smartports you can deploy and configure a rock-solid business network in minutes.
If you own a Cisco network switches, bridges & hubs and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA:
Specifications
    Performance Capacity in Mpps (64-byte packets): 11.9

    Switching Capacity in Gbps: 13.6
    Layer 2 Switching Spanning Tree Protocol: Standard 802.1d STP support
    Fast convergence using 802.1w (Rapid Spanning Tree), enabled by default

    Port Grouping: Support for IEEE 802.3ad Link Aggregation Control Protocol
    • Up to 8 groups
    • Up to 4 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation

    VLAN: 16 VLANs supported
    Port-based and 802.1Q tag-based VLANs

    Voice VLAN: Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS

    Internet Group Management Protocol Versions 1 and 2 Snooping: Internet Group Management Protocol limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups

    Head-of-Line (HOL) Blocking: Head-of-line blocking
    Security IEEE 802.1X (Authenticator Role): RADIUS authentication and accounting, MD5 hash

    Port Security: Locks MAC addresses to ports and limits the number of learned MAC addresses

    Storm Control: Broadcast, multicast and unknown unicast
    Quality of Service Priority Levels: 4 hardware queues

    Scheduling: Strict priority and weighted round-robin
    Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)

    Class of Service: Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)

    Rate Limiting: Ingress policer, per VLAN and per port
    Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 2618
    IPv6 IPv6: IPv6 host mode
    IPv6 over Ethernet
    Dual IPv6/IPv4 stack
    IPv6 neighbor and router discovery (ND)
    IPv6 stateless address auto-configuration
    Path maximum transmission unit discovery
    Duplicate address detection
    Internet Control Message Protocol version 6
    IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol support

    IPv6 QoS: Prioritize IPv6 packets in hardware

    Multicast Listener Discovery Snooping: Deliver IPv6 multicast packets only to the required receivers

    IPv6 Applications: Web, ping, Simple Network Time Protocol, Trivial File Transfer Protocol, RADIUS, syslog, DNS client

    IPv6 RFCs Supported: RFC 2463: ICMP version 6
    RFC 3513: IPv6 address architecture
    RFC 4291: IPv6 addressing architecture
    RFC 2460: IPv6 specification
    RFC 2461: Neighbor discovery for IPv6
    RFC 2462: IPv6 stateless address auto-configuration
    RFC 1981: Path maximum transmission unit discovery
    RFC 4007: IPv6 scoped address architecture
    RFC 3484: Default address selection mechanism
    RFC 4214: ISATAP tunneling
    RFC 4293: MIB IPv6: Textual conventions and general group
    RFC 3595: Textual conventions for IPv6 flow label
    Management Web User Interface: Built-in switch configuration utility for easy browser-based device configuration (HTTP) Supports configuration, system dashboard, system maintenance and monitoring

    Remote Monitoring: Embedded RMON software agent supports one RMON group (statistics) for enhanced traffic management, monitoring and analysis

    IPv4 and IPv6 Dual Stack: Coexistence of both protocol stacks to ease migration

    Firmware Upgrade: Web browser upgrade (HTTP) and TFTP

    Port Mirroring: Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe Up to 4 source ports can be mirrored to one destination port. A single session is supported

    VLAN Mirroring: Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe Up to 4 source VLANs can be mirrored to one destination port. A single session is supported

    Dynamic Host Configuration Protocol (Options 66 and 67): Dynamic Host Configuration Protocol options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download)

    Text-Editable Config Files: Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment

    Smartports: Simplified configuration of QoS and security capabilities

    Cloud Services: Support for FindIT Network Discovery Utility

    Localization: Localization of GUI and documentation into multiple languages

    Other Management: HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog
    Power Efficiency Energy Detect: Automatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down
    Active mode is resumed without loss of any packets when the switch detects the link is back up

    Cable Length Detection: Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m
    General Features Jumbo Frames: Frame sizes up to 9K

    MAC Table: Up to 8000 MAC addresses
    Discovery Link Layer Discovery Protocol (802.1ab) with LLDP-MED Extensions: Link Layer Discovery Protocol allows the switch to advertise its identification, configuration and capabilities to neighboring devices, which store the data in an MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones

    Cisco Discovery Protocol: The switch advertises itself using the Cisco Discovery Protocol
    Power Over Ethernet Power Dedicated to PoE: 32W

    Number of Ports That Support PoE: 4
    Power Consumption Power Savings Mode: Auto power down for link down

    Power Consumption Worst Case: 110V/P=7.6W
    220V/P=8.1W

    Heat Dissipation (BTU/hr): 27.6
    Ports 8 Gigabit Ethernet RJ-45 ports
    Buttons Reset button
    Cabling Type Unshielded twisted pair Category 5 or better for 10BASE-T/100BASE-TX; Unshielded twisted pair Category 5 Ethernet or better for 1000BASE-T
    LEDs System, Link/Act, PoE, Speed
    Flash 8 MB
    CPU 32 MB Memory
    Packet Buffer Memory 4 MB
    Power Supply 100V-240V, 1.0.56A, 50-60 HZ
    Fan No
    Acoustic Noise N/A
    MTBF @ 40°C (hours): 69,003
    Certifications UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
    Environmental Requirements Operating Temperature: 32 to 104°F (0 to 40°C)
    Storage Temperature: -4 to 158°F (-20 to 70°C)
    Operating Humidity: 10 to 90%, relative, non condensing
    Storage Humidity: 10 to 90%, relative, non condensing
    MINIMUM REQUIREMENTS Web browser: Mozilla Firefox version 2.5 or later; Microsoft Internet Explorer version 6 or later
    Category 5 Ethernet network cable
    TCP/IP, network adapter and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network
    Dimensions (DxWxH) 5.12 x 5.12 x 1.52" (130 x 130 x 38.60 mm)
    Weight 2.78 lb (1.26 kg)
    Packaging Info
    Package Weight 3.0 lb
    Box Dimensions (LxWxH) 12.7 x 11.0 x 3.1"
    The user manual for the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA can be downloaded in .pdf format if it did not come with your new network switches, bridges & hubs, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Cisco users keep a unique electronic library for Cisco network switches, bridges & hubss, where you can use our link to download the user manual for the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA.

    The user manual lists all of the functions of the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA, all the basic and advanced features and tells you how to use the network switches, bridges & hubs. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Cisco service.

    If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA. User manuals are also available on the Cisco website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.



    Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA - no comments have been made yet - be the first to add a comment

    Post new comment/question/response regarding the Cisco SG200-08P 8-Port 10/100/1000 Gigabit PoE SLM2008PT-NA

    Fields marked with * must be filled out.
    Your name *:
    E-mail :
    Subject *:
    Message text *:
    Enter the code *:
    (spam block)
    "manual"
    If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

     

    Can't find what you're looking for? Try Google Search!



    Current discussions
    Most recently discussed products:

    User's manuals downloading help - Linhof Compendium Lens Shade Master Technika 1926
    Posted by: Jean-Louis LLECH
    2024-03-28 18:30:04

    Hi, I am 75 years old, I live in Beauvais, France. I was during 43 years a S.E. in the french civil service of Equipment and Housing, now retired. I have been practicing photography for over half a century. I mostly use Large and Medium Format f...
    Simmons 6-24x50 - Simmons 6-24x50 Predator Varmint Riflescope 656245
    Posted by: Stuart Williams
    2024-03-26 12:36:48

    I have located manual for this on your site but how do I download / print it please ?...
    USER MANUAL TSP2 17 BUN - Telmax TSP2-17-BUN Dual 17" Presidential TSP2-17BUN
    Posted by: AYO
    2024-03-26 10:07:35

    MANUAL REQUIRED TO SET UP...
    lens servo - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
    Posted by: julia yoko
    2024-03-25 22:07:20

    i would like to know where the lens manual can be found...
    NEPVS14-17 - ITT Night Enforcer PVS-14 Pinnacle Night Vision ITTE-NEPVS14-17
    Posted by: Keller Bradshaw
    2024-03-25 17:57:35

    Hi, I would like a user manual for the NEPVS14-17...

    Uploaded instruction manuals
    Upload a link to an instruction manual for a depicted product here:

    Link format "http://www.link2manual.com/manual.pdf"

    Enter the code: "manual"






    PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
    sitemap.txt alx