|
User manual for Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Cisco
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Wireless Access Points
- Safety instructions
- Startup and operation of the wireless access points
- Tips for setting up your Cisco
- Settings and expert assistance
- Contact Cisco service
- Troubleshooting
- Warranty information
- Price: 55 USD
|
We recommend checking out our discussion threads on the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA,
which address similar problems with connecting and setting up Wireless Access Points Cisco.
|
User manual for the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA
The user manual for the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Wireless Access Points.
The Cisco WAP121-A-K9 Wireless-N Access Point with Single Point Setup is an easy way to improve the performance and reach of your small business network with advanced 802.11n wireless technology. This flexible solution can connect up to 10 employees on a single access point. With Single Point Setup controllerless multi-access point deployment technology, the wireless LAN can scale up to four WAP121s to provide broader coverage and support additional users as business needs change.
Designed for performance-intensive applications, the WAP121-A-K9 employs 802.11n wireless technology to deliver high throughput and extended range throughout your office. It incorporates built-in quality-of-service (QoS) features that let you prioritize bandwidth-sensitive traffic, enabling the deployment of business quality voice over IP (VoIP) and video applications.
The WAP121-A-K9 is simple to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. A sleek, compact design with flexible mounting options enables the access point to smoothly blend into any small business environment. Support for PoE makes the device easy to install without the need for separate power plugs or expensive new wiring.
To enhance reliability and safeguard sensitive business information, the WAP121-A-K9 supports both Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA2), encoding all your wireless transmissions with powerful encryption. In addition, 802.1X RADIUS authentication helps keep unauthorized users out. For organizations that need to provide secure wireless access to employees, customers, and partners, it also provides support for separate virtual networks, with granular configuration options that let you provide the appropriate level of access for different users.
Single Point Setup provides a centralized method to administer and control wireless services across multiple access points. Via one access point on the LAN you have a single view of the whole WLAN to replicate configuration, security, and management across all access points. With the WAP121-A-K9, you can extend highly secure business-class wireless networking anywhere in the office, with the reliability and flexibility to meet changing business needs.
|
If you own a Cisco wireless access points and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA:
| Minimum Requirements | 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
Switch/router with PoE support or PoE injector when used with PoE
Web-based configuration: Java-enabled web browser | | Standards | IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) | | Ports | LAN Fast Ethernet auto sensing, DC jack | | Switch | Power button (on/off) | | Button | Power (on/off) push button, Reset button | | Cabling Type | Category 5e or better | | Antenna | Internal antennas optimized for wall, ceiling, or desktop placement | | LEDs | Power, WLAN, LAN | | Operating System | Linux | | Ports | 10BASE-T/100BASE-TX Ethernet, 12 VDC power with support for 802.3af PoE | | Power Supply | External 12 V 0.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE | | Button | Power (on/off) push button; Reset button | | Lock | Slot for Kensington lock | | LED | Power, Wireless, Ethernet | | PoE | 802.3af | | Peak Power | 6 W | | Supports | VLAN, 802.1X supplicant, SSID to VLAN mapping, Auto channel selection, Spanning tree, Load balancing | | Number of VLANs | 1 management VLAN plus 4 VLANs for Service Set ID (SSID) | | Multiple SSIDs | 4 | | IPv6 | IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc | | Layer 2 Features | 802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN | | Encryption | WPA/WPA2/WEP & Enterprise authentication | | Access Control | Management access control list (ACL) plus MAC ACL | | Secure Management | HTTPS | | Wi-Fi Protected Setup | Soft WPS, no hardware push button | | Broadcast System | SSID | | Detection Functions | Rogue access point | | Options | Desktop installation; mounting bracket included for easy ceiling or wall mounting | | Lock | Kensington lock slot | | QoS | Wi-Fi Multimedia & Traffic Specification (WMM TSPEC) | | Data Rate | Up to 300 Mbps data rate (real-world throughput will vary) | | User support | Recommended up to 16 connected users, or 10 active users. | | Web User Interface | Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) | | Setup | Single Point | | Access Point Management | Maximum per cluster: 4
Active clients per cluster: 40 | | Management Protocols | Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour | | Event Logging | Event logging | | Network Diagnostics | Logging and packet capture | | Web firmware upgrade | Firmware upgradable through web browser, imported/exported configuration file | | Dynamic Host Configuration Protocol (DHCP) | DHCP client | | Host | IPv6 | | Frequency | Single-band 2.4 GHz | | Radio Type | Single radio | | Modulation Type | OFDM (Orthogonal Frequency Division Multiplexing) | | Channels | 1 to 13 (depending on country)
Channels 1 through 11 (FCC)
Channels 1 through 13 (ETSI) | | Isolation | Wireless isolation between clients | | Internal Antennas | Internal fixed PIFA antennas | | Antenna Gain In dBi | 2 dBi each antenna | | Transmitted Power | 802.11b @ 11 Mbps: 17 dBm
802.11g @ 54 Mbps: 13 dBm
802.11n @ HT20HT40, MCS15: 13 dBm | | Receiver Sensitivity | 802.11b: 11 Mbps @ -86 dBm
802.11g: 54 Mbps @ -71 dBm
802.11n: 300 Mbps @ -64 dBm | | Multiple SSIDs | 4 | | Supports | Wireless Distribution System (WDS), Roaming, Wireless VLAN map, WLAN security | | WMM | With unscheduled automatic power save and voice profile | | Access Point Modes | Access Point mode, WDS bridging, Workgroup Bridge mode | | Power | 12 VDC, 0.5 A input, and IEEE802.3af compliant PoE | | Certifications | FCC class B, CE, IC, Wi-Fi | | Operating Temperature | 32 to 104°F (0 to 40°C) | | Storage Temperature | -4 to 158°F (-20 to 70°C) | | Operating Humidity | 10 to 85% non-condensing | | Storage Humidity | 5 to 90% non-condensing | | Mean Time Between Failures | 531189 hours | | Dimensions (W x D x H) | 4.89 x 4.89 x 1.38" (124.17 x 124.17 x 35.00 mm) | | Weight | 0.37 lb (0.16 kg) | | Package Weight | 1.3 lb | | Box Dimensions (LxWxH) | 9.7 x 5.8 x 3.2" | |
The user manual for the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA can be downloaded in .pdf
format if it did not come with your new wireless access points, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Cisco users keep a unique electronic library
for Cisco wireless access pointss,
where you can use our link to download the user manual for the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA.
The user manual lists all of the functions of the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA,
all the basic and advanced features and tells you how to use the wireless access points.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Cisco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA. User manuals are also
available on the Cisco website under Computers & Solutions - Networking - Wireless Access Points.
Question and answer discussion forum concerning user instructions and resolving problems with the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Cisco WAP121-A-K9 Wireless-N Access Point WAP121-A-K9-NA
|
|
|
|
|
