|
User manual for Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN
- Manufacturer: Comtek
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Base Stations
- Safety instructions
- Startup and operation of the base stations
- Tips for setting up your Comtek
- Settings and expert assistance
- Contact Comtek service
- Troubleshooting
- Warranty information
- Price: 716 USD
|
We recommend checking out our discussion threads on the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN,
which address similar problems with connecting and setting up Base Stations Comtek.
|
User manual for the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN
The user manual for the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Base Stations.
The Comtek BST 75-216 CWN Mini Base Station Transmitter with Communication EQ is simple to use and features Flash Memory synthesized channel programmability with a manual, 10-channel selectable switch. A multi-function RF indicator detects bad antenna load, RF presence, and coaxial cable open condition for quick and easy troubleshooting. To accommodate a variety of receivers, the BST 75-216 Transmitter can operate with both non-companded receivers and companded receivers for higher fidelity sound reproduction. A practical, compact, all-metal enclosure is suitable for permanent rack-mount installations or for standalone portable use.
The BST 75-216 CWN is configured with 5 channels using the wide band compounded channels for use with the PR-216 receiver and 5 channels using the narrow band non-companded channels for use with the Phonak Invisity receivers. Both channel groups use the standard EQ.
|
If you own a Comtek base stations and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN:
| Audio Inputs | Line level balanced input 0 dBm for 80% modulation (+20 dBm maximum, XLR-3F) Unbalanced input (+5 dBm maximum) or 2 wire electret microphones with bias voltage for electret microphone (-35 dBV at 5 kΩ) with 1/4” phone jack | | Connectors | XLR-3F Combo with 1/4” phone jack Barrel type 5.5 x 2.1 mm power jack DC BNC type RF output | | Indicators | Operation Indicators: LED bar-graph VU meter LED antenna load and SWR indicator LED DC power indicator | | Antenna | Short loaded BNC whip antenna BNC RF output connector for an external antenna (sold separately) | | FCC Compliance | Type certification and type acceptance under FCC Part 95 | | Power Requirements | 12 VDC, 200 mA maximum | | Frequency Response | 100 Hz to 10 kHz | | Audio Distortion | Less than 1% at 80% modulation | | Gain Control | Audio: Limited to 20 dB | | Limiter | Modulation Limiter: Peak compressor type with high linear overload protection (25 dB) Attack time less than 1 minutes, recovery time 10 ms | | Audio Processing | Companded and non-companded to accommodate a variety of receivers | | RF Output Power | Maximum power output for FCC Part 95 (100 mW) | | Frequency Stability | Better than 0.002% digitally synthesized, crystal controlled | | Frequency Modulation | 10 kHz deviation companded 5 kHz deviation non-companded | | Operating Frequency | 216.0125 to 216.9750 MHz (57 channels) Custom factory programmed to 10 of 19 available high-fidelity companded channels or may be programmed to 10 of 38 standard non-companded NB channels | | Harmonic & Spurious Emissions | Better than 50 dB below carrier | | Dimensions | 3.75 x 1.63 x 5.25" (9.53 x 4.14 x 13.34 cm) | | Weight | 17.00 oz (481.94 g) | | Package Weight | 3.2 lb | | Box Dimensions (LxWxH) | 11.3 x 9.1 x 4.5" | |
The user manual for the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN can be downloaded in .pdf
format if it did not come with your new base stations, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Comtek users keep a unique electronic library
for Comtek base stationss,
where you can use our link to download the user manual for the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN.
The user manual lists all of the functions of the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN,
all the basic and advanced features and tells you how to use the base stations.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Comtek service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN. User manuals are also
available on the Comtek website under Pro Audio - Location Sound - Base Stations.
Question and answer discussion forum concerning user instructions and resolving problems with the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Comtek BST 75-216 CWN Mini Base Station BST 75-216 CWN
|
|
|
|
|
