|
User manual for Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2
- Manufacturer: Creek
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - Accessories
- Safety instructions
- Startup and operation of the accessories
- Tips for setting up your Creek
- Settings and expert assistance
- Contact Creek service
- Troubleshooting
- Warranty information
- Price: 250 USD
|
We recommend checking out our discussion threads on the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2,
which address similar problems with connecting and setting up Accessories Creek.
|
User manual for the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2
The user manual for the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2 provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Accessories.
The Creek Sequel 54 mk2 MM Phono Pre-Amp is suited for medium output moving coil cartridges, with an output between 0.5 to 1 mV and a matching impedance of < 120 ohm. The Sequel 54 mk2 is not suitable for high output MC cartridges, which require lower gain and a higher input impedance.
The Sequel mk2 has two gain stages using low-noise op-amps. RIAA correction is performed both active and passively. The first gain stage matches the MM cartridge's < 120 ohm impedance and adds gain, without changing the frequency response.
The first stage of RIAA de-emphasis is performed passively between the two gain stages. The mk2 circuit uses a low impedance filter circuit for improved noise performance. The second gain stage boosts the level further and uses active filtering in its feedback for the RIAA de-emphasis, For improved RIAA accuracy and improved sonic quality, the Sequel mk2 is made with E96 1% tolerance metal film resistors and 1% tolerance polypropylene WIMA capacitors.
To eliminate coupling capacitors that can negatively affect the sound, a DC servo circuit is used to block DC from input to output and roll-off low frequencies sensibly below 10 Hz. There is no rumble filter in this design.
The Sequel mk2 is powered by a dedicated voltage from the integrated amplifier, via its PCB connection pins. Locally, it uses low noise voltage regulators, whose function is to stabilize the voltage and filter noise from the main power supply. The Sequel mk2 has optimal overload margin for a given gain.
|
If you own a Creek accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2:
Compatibility | Creek: Destiny 2 integrated amp Evolution 2 integrated amp Evolution 5350 integrated amp Classic 5350SE Integrated amp 5350SE, 5350R and 5350 Integrated amps 5250,5250R and 5250SE integrated amps 4330 and 4330SE Integrated amps, but not mk2 versions 4240 and 4240SE Integrated amps P42 Pre-amp
Note: The Sequel Phono pre-amp cannot be fitted to the original Destiny 1 integrated amp, because the connections on the pre-amp 1 are unique and it had the special Destiny Phono pre-amp made for it only. | Gain | x 500 (54 dB) | Frequency Response | 10 Hz to 20 kHz +/- 0.5 dB | Signal to Noise Ratio | -73 dB | Total Harmonic Distortion | MC < 0.03% | Deviation | R1AA: +/- 0.5% | Output | 400 mV from 0.8 mV input | Input Sensitivity | -0.8 mV | Impedance | 120 ohm | Capacitance | 1000 pF | Overload | Margin MM: 22 dB | |
The user manual for the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2 can be downloaded in .pdf
format if it did not come with your new accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Creek users keep a unique electronic library
for Creek accessoriess,
where you can use our link to download the user manual for the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2.
The user manual lists all of the functions of the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2,
all the basic and advanced features and tells you how to use the accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Creek service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2. User manuals are also
available on the Creek website under Pro Audio - Computer Audio - Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Creek Sequel 54 mk2 MM Phono Pre-Amp SEQUEL 54MK2
|
|
|
|
|